H
Hi Adrian, the problem came back today with test version 4.0.158. I sent a report from the app around 08:40 Danish time, before restarting the app, so it should show the error while it was happening. Restarting the app fixed it again.
H
Version 0.2.39 is on the test channel. If you have Floor Plan Dashboard next to Energy Dashboard, the top of the dashboard now has a switch: Energy | Home. One tap on Home and you see your floor plan, on the same screen. Floor Plan Dashboard has the same switch back to Energy. Handy for a wall tablet: one screen for both. If you do not have Floor Plan Dashboard, nothing changes. Floor Plan Dashboard is my new app, still a test version. Your home as a live floor plan in 2D and 3D, with your…
H
Versie 0.2.39 staat in het testkanaal. Heb je naast Energie Dashboard ook Plattegrond Dashboard, dan staat er nu bovenaan het dashboard een wisselknop: Energie | Huis. Eén tik op Huis en je ziet je plattegrond, op hetzelfde scherm. Plattegrond Dashboard heeft dezelfde knop terug naar Energie. Handig voor een tablet aan de muur: één scherm voor allebei. Heb je Plattegrond Dashboard niet, dan verandert er niets. Plattegrond Dashboard is mijn nieuwe app, nog in de testversie. Je huis als live…
H
Thanks! Here is the widget with the demo home. It shows the same live plan as the dashboard, in 2D or 2.5D, in Homey’s dark or light mode. Tap a lamp for its controls. In the widget settings you choose the plan, the level, the view and how it is turned, and optionally a side panel with clock, weather and calendar. I have added these to the first post as well.
H
Lennart_Peereboom: occurs since a week. There were no changes in the app at that time, which exclude problem with the app itself. Check iOS updates, router updates, ensure you uses hostnames or static IP assignments, check privacy settings on iPhone etc
H
Thanks! Here is the widget on a Homey dashboard, with the sample home from the demo, in dark and light. The widget shows one level of a plan, in 2D or in 2.5D (seen from an angle), and you can turn it in steps of 90°. Tap a lamp and its switch and dim slider open right there, or set it to switch at once. You can zoom with two fingers. In its settings you choose which values show beside the devices, whether rooms get a colour for their temperature, and a side panel with weather and calendar. The…
H
That i found strange. I have 5 iPhones connected to the app. They all show the same logs. This problem as i mentioned before, occurs since a week. I use this app since June, and untill now i never had this problem.
H
Hi SoPhos, Unfortunately, restarting the app doesn’t help, nor does restarting the entire Homey Pro. The only way to trigger the initial time synchronization again seems to be using Maintenance → Try to repair. For now, I’d rather not update the time manually this way. I’ll wait for the app update so I can confirm whether the time updates automatically as expected. Thanks for looking into this and for your help!
H
I have for 7 days no reporting anymore, nothing happening or bug?
H
Satoer: New: Flow Card: Dashboard Opened Page - Added a trigger card that fires when a dashboard opens or navigates to a page. Would it be possible to let de Dashboard variable empty in this card? When making major changes to the layout or implementing significant app updates, I first copy the dashboard under a different name (including a version number). Since the dashboard is mandatory and cannot be a variable, I have to manually update dozens of flows each time. At least one value has to be…
H
Good idea, it’s in 0.5.13. Graph on hover Hold the mouse over the taskbar widget and the tooltip now shows a small graph of the house’s use, below the numbers. Settings → Appearance → Graph on hover sets the period: 15 minutes, 1 hour (default) or 3 hours, or off. One limitation The graph is built from the live readings since HomeWindow started, so right after a restart it is still short. It fills up as HomeWindow runs.
H
Thanks! Good to hear the search box is fine now, and that the widget changed a 25-year habit Battery value on the widget HomeWindow found more than one device that Homey Energy marks as a home battery. It added up their power and averaged their charge, so 47 % is the average of your FVE battery (40 %) and another device, probably the inverter. In 0.5.13 the Energy page has Battery counts from (like Solar counts from). Switch off the device that should not count, and the widget and the Overview…
H
JohanP: But the Remeha Home app also says I need to connect a Thermostat to the app ? The Remeha Home app for Homey, or for your mobile? Something wrong with te Remeha cloud ? Quite possibly, the Remeha cloud isn’t the most stable (and yet, they refuse to consider giving local access to the eTwist…).
H
Hi @Kaoh , first of all thank you for your app. I have added this Homey App to my Homey Self-Hosted Server and have paired successfully. I also installed the Homey Wear Control app on my Android and on my Galaxy Wear 7. I configured 6 devices to sync and it appeared on my Galaxy Wear 7, but when I tried to tur it ON or OFF I received the error “Could not prove the PIN on this device” as it can be seen in the image below. I’m sure it was not configured with the “REQUIRE PIN TO ACT” and I tried…
H
And on successful pin it would run a flow? And disable typing for a while after maybe three wrong attempts?
H
Please translate your posts as this is the English section
H
There’s no Homey app for it yet, but you can request one here: [Requests] Homey Pro Community App Requests Apps Homey Pro Community App Requests Welcome to the Homey Pro Community app request topic. This topic is to centralize all app requests for Homey Pro Apps, made by the community. (This does not account for app(s) for Homey (bridge), only for the Homey Pro, as Athom only wants apps made by brands or by themselves.) For Requests at Athom please use the Official link in the Appstore, see the…
H
Thank you. Have installed and will test
H
Hey all, I picked up a budget-friendly bathroom light from Hubspace (Home Depot’s smart line). It’s connected to my Wi-Fi network, but Homey won’t discover or pair with it. Is there a direct way or a community app to add Hubspace devices into Homey? (I’ve already seen the Google Home/Alexa bridge workarounds and am hoping for a direct route.) Appreciate any help!
H
Agree with @Drako74 Widgetkeeper from @ThomasRS is amazing!
H
@SunBeech Great to hear the touch and position fixes work for you, thanks for testing! Both folder points are fixed in v1.9.4, now on Test: “My Flows” is always the first entry in the folder list and is selected by default at launch, so new flows are saved at the top level unless you pick another folder. Let me know how it goes.
H
Hoi Gijs, “Geen auto aan de kabel” baseert SlimLaden op wat je Alfen in Homey doorgeeft als stekkerstand. Zegt de paal volgens SlimLaden dat er geen auto hangt, of is die stand onbekend, dan maakt SlimLaden geen laadplan. Dat verklaart de ochtenden zonder plan, maar nog niet waaróm die stand bij jou niet klopt terwijl de kabel erin zit. Twee dingen helpen om dat uit te zoeken: Kijk in EV Laden → Inrichting → Auto aangesloten welke waarde daar staat terwijl de kabel erin zit en de paal “wacht op…
H
Great app! Is it possible to create a setting for timeline reporting to differentiate between reports? For instance I would only like to see a timeline report when a device is not available and am less interested in not reporting devices. Thanks
H
Both PR’s are merged and created 1.13.5 test version
H
Hoi Crapton, Twee dingen door elkaar, ik pak ze apart. 1. Hoe SlimLaden ziet dat de warmtepomp aan staat SlimLaden kijkt niet naar je P1-meter, maar naar de meting van de warmtepomp zelf in Homey. Die 1200 W is de drempel op díé meting (“aan vanaf”). Meldt het apparaat een nieuwe waarde, dan verwerkt SlimLaden die meteen; elke 5 minuten is er daarnaast een controle als vangnet. Geeft je Vaillant-app geen vermogen door, dan heeft SlimLaden niets om op te herkennen, en dan stopt de accu ook niet.…
H
You are welcome Just a simpel alarm panel so you can alarm and disarm with a code that you maybe set up in the app setting or widget? HA have som nice stuff when I google see pic
H
Halloj, Nån som har en enkel lösning för skolmaten? Verkar knepigt att få tag i Api eller rätt skola? Ska ha det på dashboarden tänkte jag
H
I managed to fix the authentication issue with Panasonic Comfort Cloud Alternative on my Homey Pro 2023. The app was failing to log in with HTTP 401 and error code 4106: “New version app has been published”, even though my credentials were correct and worked in the official Panasonic Comfort Cloud app. The fix was to update the Panasonic app version sent by the Homey app. In drivers/aircon/driver.ts, I changed: let appVersion = "2.1.0"; to: let appVersion = "4.4.0"; I also updated…
H
Marcel_R: Using the graph widget for displaying my actual power consumption works fine. But when I want a graph showing the actual solar panel power, it only works as long as the values send subsequently are not identical. As I send new values every 10 seconds (Homey flow) and use overlays for power consumption and solar panel power, it’s quite annoying when the both graphs are not ‘in sync’ (a datapoint added every 10 seconds, like in evenings, when solar power is 0). So, how to get the graph…
H
I created one more PR. When a flow uses the camera image in more than one card, each card gets a different picture, because a new snapshot is taken every time. So I added a doorbell card that takes one snapshot and keeps it as a tag for a while, so every card in the flow uses the same picture. Here’s the PR, happy to hear what you think: github.com/steffjenl/com-homey-unifiprotect feat(protectdoorbell): add action card that returns a frozen camera image tag (#60) develop ←…