H
Hi @Martijn_de_Bont, following up on my earlier report: the stale temperature is back. I’m on a Warmup Element (ELM-01-WH-RG), WarmUp v1.2.1. In Homey Insights, the measured temperature for my Bathroom thermostat has been flat at 22°C since around 15:00 UK time on Sat 14 Nov, while MyHeating and the thermostat itself show a different reading. The target temperature has also stayed at 10°C all week. It looks like polling has stalled again. I’ll send a new diagnostics report, and I’m happy to…
H
@LRvdLinden Testresult is positive! Thank you!
H
Hi Peter, Thanks for your suggestion. I kept the app’s RAM monitor open while making the changes. It seems that the crashes may be related to an unfortunate combination of scripts starting at the same time, causing memory usage to spike. But I did not change anything in the last few days, so weird that it became an issue anyhow. So far, HomeyScript has been running for almost three hours without a crash, which is encouraging (compared to each 15 minutes). However, I’m not convinced the issue is…
H
Thank you for responding so quickly I have sent the diagnosics report: 9b1f878d-e64e-4a2c-a208-b73a00145396. I hope it helps!
H
Andy, Not unreasonable at all, it’s a great idea! Version 0.4.0 is now in the test channel: The overview device has a new value “Last test round”, updated after every round, also when all routers respond. It shows the time and the result, e.g. “16 Nov 23:10 · all 37 respond” or “16 Nov 23:20 · 2 of 37 not responding”. Because it changes every round, Device Watchdog will keep seeing the device, and every round adds an entry to the device events. Bonus: a new trigger “A test round has finished”…
H
Swedish Waste Collection – Sophämtning Sverige Never forget to put the bins out again. Add your address and Homey shows when each of your bins is next emptied, reminds you the evening before and lets your Flows know whether a bin goes out today or tomorrow. Works in 111 Swedish municipalities, from Malmö to Kiruna. App Store: https://homey.app/a/com.github.moogblob.sophamtning Test version: Swedish Waste Collection | Homey Features One device per address. Choose county, municipality and type…
H
v1.4.3 is now available as a test version: https://homey.app/a/codes.lucasvdh.homeconnect/test/ It has also been submitted to the App Store (it replaces 1.4.2, which Athom sent back for a description/readme update). New for appliances that stay unavailable: the device now says why it can’t connect (not found on the network, no answer, key not accepted, …), appliances found via mDNS are connected to directly, and the app settings show a Connection column per appliance. @Tom_ten_Den this is the…
H
New app update ( LIVE: 1.9.11): Changelog: NEW: 1: None FIXES: 1: FIX: Keep the last known location when iCloud sends none If you find any issues, send a diagnostic report Note: Before sending a report make sure to reproduce the issue so the issue will be visible in the report Via Homey Mobile app: More - apps - Apple Findmy - settings wheel right top - send diagnostic report (put your email in the input field to make it easier) Via Homey Webapp: Settings wheel bottom left - Select Apple Findmy…
H
@Arne_Sch will check! (ignore my email reply)
H
Hi, your device is also not listed yet. Can you please install test version 1.3.3. After install/app start, send a diagnostics report. I will add the device ID. Thanks.
H
Hi Jumpingtrees, thanks and welcome. @Mantlet Tesla works a bit different , it depends on the capabilities of the app that you use. No flows needed for a Zappi: Ultimate EMS controls it directly through its charge mode (Off / Eco+ / Fast), so your flow does not fire because the EMS takes the direct path. Two things to check: 1) which Homey app is your Zappi connected with? Direct control works with the myenergi app from net.biseth.myenergi; other Zappi apps may not expose the charge mode…
H
It’s the same thing here. Did you get a response from support?
H
Strange! I am unable to test this myself since i’m on a samsung but if you got it running thats good
H
He Marcel. Wat is je doel? Waarom moet er nog stroom zijn na 18.15 uur? Duurdere uren… wat houdt dat in? Mijn plan is dit: Waarom zou ik morgen willen laden en ontladen als me dat geld kost?
H
Visas samma Ring-kamera med rörlig bild i Ring-appen på samma iPad, och vad händer om du öppnar den direkt i Homey i stället för via dashboarden? Prova gärna samma dashboard på en annan enhet eller webbläsare, om du har en till hands, och jämför båda Ring-kamerorna. Notera om bilden är en stillbild, om den fastnar efter en stund eller om något felmeddelande visas. Det kan hjälpa att skilja ett problem som bara uppstår i dashboarden på iPad från ett som även finns i Homeys kameravy. Axis-kameran…
H
Hi Tomas, I have a Seal U DM-i and enjoyed the app for some weeks, but unfortunately it stopped working since yesterday. It looks like BYD updated their app which caused the problem. I created a diagnostic report with the following id: 5a3e56df-9608-4891-a23d-d8f2ed82252a
H
Yes, that seems to work just fine!
H
Thanks for that. I’ll look into it. D
H
Is this log of any use? b0e6d871-3c3b-4a27-a8cf-3c0175cdc8c3 I made a flow to give me a message when the phone was further than 300km away from homey so I could make the log. I hope this helps. According to homey the iPhone was 5700km away.
H
Volkswagen changed their URL - [VW/Audi EU] Portal login redirects to eu-data-act.vwgroup-datahub.com (refused host) - all brands · Issue #2135 · its-me-prash/vwgroup-connect-ha · GitHub
H
GitHub GitHub - seegersnl/com.kaoh.lgmodbuss at copilot/compressor-speed-power-limit Contribute to seegersnl/com.kaoh.lgmodbuss development by creating an account on GitHub.
H
Hi Kenny_S, You’re not only good at designing and building great apps and widgets, but also at reading my mind! Version 1.8.33 with the Zone Controller as a new device is exactly what I needed. I did a quick check on this and its working! Thank you! You wrote: “The app already splits power usage per mode, and if there is a known energy price, it also shows the price.” This part doesn’t seem to be working for me. I can see the current real-time kWh usage, but it isn’t subdivided into…
H
I am - by the way - in close contact with eq3 and maybe there’s a HCU Plugin, soon Maybe it can also be the official plugin in the hear future - there’s some conversations to be done with Athom, but we’ve already prepared the code. But until now it only makes sense to upload the plugin if you don’t need the developer mode then. Because if (like for community plugins) you still need to enable it, the direct connection through homey is more robust (because you only need to maintain 1 program…
H
I’m seeing a similar issue with an IKEA ALPSTUGA on a Homey Pro (Early 2023). Yesterday evening, CO₂ and humidity both stayed flat in Homey Insights for about 84 minutes, while a nearby sensor continued showing changes. The ALPSTUGA readings froze again later that evening. In my case, restarting the IKEA Home Smart app in Homey brings the readings back temporarily. I haven’t checked yet whether the ALPSTUGA’s own display continues updating during the freeze, or which firmware version it’s…
H
Thanks @Tom_ten_Den, I found your report. Your Homey can’t find your dishwasher on the network. Not by its name and not through mDNS discovery, so the app never gets an address to connect to. A few questions to narrow it down: Was your dishwasher switched on when you paired it? Some models turn their wifi off in standby. Is it on the same network as your Homey, not a guest or IoT network or a separate VLAN? Does it show as online in the official Home Connect app? I’m still working on a new test…
H
Yesterday my Renault Zoe became unavailable again. The connection between the app and my Zoe is gone. Tried to remove and reinstall the app, but no result unfortunately. I had a backup line via my Home Assistant integration (I’m using both Homey and HA in parallel) but that connection also failed on me. Anyone else experiencing connectivity issues?