XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

NVIDIA Developer Forums - Latest posts

Latest posts

Jetson AGX Orin: Brief High Pulse at Power-On on Level-Shifted PH5 Signal Despite MB1 Output-Low Configuration

Platform and Pin Information Platform: Jetson AGX Orin, JetPack 6.2.1 GPIO:GPIO3_PH.05 Pin function:UART4_RTS Pinmux name:uart4_rts_ph5 Signal name:GP120_UART4_RTS_N_BOOT0_STRAP Usage: GPIO output Observed Behavior A brief high pulse is observed at the output of the external level shifter immediately after power-on . The signal subsequently transitions to low. We suspect that the transition to low occurs when MB1 applies the GPIO configuration, but this has not yet been verified against the…

Official DLSS 5 Neural Rendering plugin access for Unreal Engine 5.8.2

So then the eager indie masses will be resorting to external solutions? Is that the gist of it? Because if history shows anything, it that the timelines on this sort of stuff is… well it’ll be a long time. I’m super-stoked you responded here with even that informative, albeit not quite what anyone was hoping to hear, news… It seems like “unsanctioned” groups like RenoDX are having much faster iterative development and release cycles with DLSS NR, and there is already an API, and tons of other…

Internal storage substitution/upgrade

I am strongly considering going in the opposite direction: rather than replacing the OEM 1TB in my Asus with a faster Corsair drive, rather replace it with something like the 2230 WD Black SN770M 2TB. It will be a tad slower but it is TLC, has good endurance and 2TB gives quite a bit more breathing room. It looks like it can sustain its speeds much longer than the other 2230 options. It is also by far the cheapest 2TB TLC drive I can find, roughly half the price of the Corsair. The OEM 1TB…

Lossless H264/H265 (NV24/4:4:4) fails on high-entropy frames due to hardcoded 1.5*W*H buffer cap in libtegrav4l2/libnvvideo

Thanks for providing r36_5_TEST_yuv444_lossless.zip. We run on Syslogic carrier boards (RML A4NX / RML A4AGX) with D3 Embedded GMSL2 camera drivers. Syslogic does not provide an L4T R36.5 (JetPack 6.2.2) BSP for these boards—their supported releases jump directly from JetPack 6.2.1 (L4T 36.4.4 / 36.4.7) to JetPack 7.2.1 (L4T 39.2.1). When we test r36_5_TEST_yuv444_lossless/{libtegrav4l2.so,libnvvideo.so} on our current L4T R36.4.7 stack (nvidia-l4t-multimedia / nvidia-l4t-gstreamer…

Jetson Orin NX 16GB: QC stickers on SoC — safe to install heatsink over them?

Hello EricGggg, Thank you for confirming that the three QC stickers must be removed before applying TIM and installing the heatsink. I have reviewed Section 4.4 of the Jetson Orin NX/Nano Thermal Design Guide v1.5, but I could not find instructions for removing these stickers safely. Could you please clarify the recommended removal procedure for the stickers directly on the SoC contact surface? What tool or method should be used to lift and peel them off without scratching or damaging the SoC…

[BUG] Open driver version 620.70.06 RTX 4070 Ti KWin Wayland 6.8.3 crash with kernel 7.3.4 in two monitor setup

I Maybe spoke too soon. i have just reviewed the logs for the boot. it seems the NVIDIA kernel flip timeout that i was experiencing is now resolved but i then had a crash caused by what i think is my IP KVM being plugged in which is causing a race condition just as the display manager starts. so allthough the symptom looks the same it is in fact no longer being caused by the kernel flip. the issue i now see is now bieng caused by https://bugs.kde.org/show_bug.cgi?id=528890 so thankyou for your…

[BUG] Open driver version 620.70.06 RTX 4070 Ti KWin Wayland 6.8.3 crash with kernel 7.3.4 in two monitor setup

I can confirm for me that there was no change in behaviour. I have just realised however if i shutdown and do essentially a cold boot and power on again before my monitors goto sleep then the system boots fine. but if i wait for my monitors to goto sleep, then the system will fail to boot

16MP IMX 519 Camera Live Preview on Jetson Orin Nano

Boost the clocks to try. sudo su echo 1 > /sys/kernel/debug/bpmp/debug/clk/vi/mrq_rate_locked echo 1 > /sys/kernel/debug/bpmp/debug/clk/isp/mrq_rate_locked echo 1 > /sys/kernel/debug/bpmp/debug/clk/nvcsi/mrq_rate_locked echo 1 > /sys/kernel/debug/bpmp/debug/clk/emc/mrq_rate_locked cat /sys/kernel/debug/bpmp/debug/clk/vi/max_rate |tee /sys/kernel/debug/bpmp/debug/clk/vi/rate cat /sys/kernel/debug/bpmp/debug/clk/isp/max_rate | tee /sys/kernel/debug/bpmp/debug/clk/isp/rate cat…

How to get the sensor embedded data

You may reference to below sample. #include <Argus/Argus.h> #include <Argus/Ext/SensorPrivateMetadata.h> #include <iostream> #include <vector> using namespace Argus; bool enablePrivateMetadata(CameraDevice *cameraDevice, Request *request) { // 1. 檢查 CameraDevice 是否支援私有詮釋資料 Ext::ISensorPrivateMetadataCaps *metaCaps = interface_cast<Ext::ISensorPrivateMetadataCaps>(cameraDevice); if (!metaCaps) { std::cerr << "Device does not support ISensorPrivateMetadataCaps" << std::endl; return false; } // 2.…

620 release feedback & discussion

Thanks everyone for the reports on “Flip event timeout” / nv_flip == NULL / page-flip timeout issue on driver 620.70.06 with multiple displays We’ve filed internal bug 7126445 , and we’re working on reproducing it internally. As a diagnostic experiment, could someone try setting the nvidia_modeset.opportunistic_flip_sync=0 kernel module parameter and report whether it changes the behavior?

Jetson_SIPL_API_R39.2.2_aarch64.tbz2 build installs *.hpp to root `/hololink`?

Hi whitesscott, Not intentional. Those headers should go under the install prefix, e.g. /usr/local/include/hololink/core, not /hololink. The SIPL CMake only adds hololink/src/hololink/core. That install() uses ${CMAKE_INSTALL_INCLUDEDIR}/hololink/core. The SIPL top-level CMakeLists.txt never includes GNUInstallDirs, so CMAKE_INSTALL_INCLUDEDIR is empty and CMake treats /hololink/core as an absolute path. libhololink_core.a still goes to /usr/local/lib because the library rule falls back to lib…

Intel WiFi 6 AX210 Failure with AGX Orin Devkit

Dear NV team, This is to report an issue with the intel Wi-Fi driver used for jetson agx orin devkit. 1) JetPack 6.2.2 The Wi-Fi firmware crashes, and approximately 100–190 ms later, nvargus-daemon also starts failing, preventing my ZED X camera from being brought up successfully. I have reproduced this issue three times, and the behavior is consistent. Evidence: a) Wi-Fi kernel log (November 19): 18:58:49.372019 wlP1p1s0: cannot understand ECSA IE operating class, 10, ignoring 18:58:49.476218…

Nvidia Driver Version 620.70.06 causing pageflip errors on multimonitor boot, NVIDIA GeForce RTX 3060, Linux 7.3.3-1-cachyos

Same multi-monitor page-flip issue on RTX 4090 with 620.73.04 I’m observing the same NVIDIA DRM problem on a different GPU generation and Linux configuration. My setup consists of an RTX 4090, Arch Linux kernel 7.3.5-arch1-1, NVIDIA Open 620.73.04, KDE Plasma 6.8.3, and two 2560×1440 DisplayPort monitors. During some boots, SDDM’s Wayland greeter stalls while initializing the displays. The kernel reports Flip event timeout on heads 0 and 1, followed by nv_flip == NULL. The error persists with…

A Detailed Guide on How to Use Hyperflare to Serve GLM-5.3-Flash across Two DGX Sparks

I prepared a Hyperflare (at 1a53275) runtime package for GLM-5.3-Flash that runs across two DGX Sparks (GB10 / SM121), and a detailed (human-written) guide on how to serve or reproduce it. The package can be served with vision support, a full 1,048,576-token context, and around 4.5 million KV tokens. TLDR on why this may interest you: llama-benchy results. You don’t enjoy using Docker and fancy a host-native solution. You don’t enjoy messing with an endless amount of environment variables. vLLM…

620 release feedback & discussion

Additional evidence for the NVIDIA DRM event-handling regression in 620.73.04 I have been investigating intermittent NVIDIA DRM failures on an RTX 4090 running Arch Linux, kernel 7.3.5-arch1-1, NVIDIA Open 620.73.04, and KDE Plasma 6.8.3 on Wayland. I noticed the recently published patch addressing the NVIDIA DRM event-handling deadlock: Commit gulafaran/open-gpu-kernel-modules nvidia-drm: handle display events off the NVKMS event thread committed 04:28AM - 19 Nov 26 UTC VeilSilence +463 -69…

[BUG] Open driver version 620.70.06 RTX 4070 Ti KWin Wayland 6.8.3 crash with kernel 7.3.4 in two monitor setup

RTX 4090 update: regression persists with 620.73.04, including at default GPU settings I performed further testing on Arch Linux after upgrading to NVIDIA Open Kernel Modules 620.73.04 and Linux 7.3.5-arch1-1. The original DRM regression remains reproducible. The same Flip event timeout and nv_flip == NULL errors still occur, although KDE Plasma has successfully initialized during my recent tests. System configuration GPU: NVIDIA GeForce RTX 4090 Kernel: 7.3.5-arch1-1 NVIDIA: nvidia-open…