V
I have a SUN Ultra 5 workstation and a SUN IPX and I can't get a mouse working on either one. Everything else is working and am pretty sure the problem is some pass through issue in the keyboard ( ??? ) but thought I'd toss this out and if I've missed something obvious .. Solaris 10 on the Ultra 5, Solaris 8 on the IPX ... have tried two Sun 5 optical mice ( that's Type 5 not 5c ) and two different 8 pin cables from the SUN's to the keyboard. It's a SUN Type 5 keyboard ... the mouse... Read more
V
I’m surprised at how many vintage computing enthusiasts share information via Facebook, often valuable information. Compared to a forum system, such as this one, their posts are effectively lost in the noise and cannot be as readily referenced by others years later — I only ever stumble across them via Google every now and then. Just IMHO, but I really see no value whatsoever in anything which meta offers. C.
V
Hello, I'm going through a collection of vintage computer and electronic equipment and recently found 16 DEC H-216 magnetic core-memory boards. The DEC labels identify them as: H-216 8K × 19 The boards are also marked: 8K × 19 BIT 3W-3D 18 MIL PLANAR MEMORY Some have Electronic Memories, Inc. identification and DEC inspection/warranty labels. They appear to date from approximately the early-to-mid 1970s. All 16 were found together and appear to have been... Read more
V
Hello everyone.I'm a 15 years old student form china.This is my first post.My English is not well.please forgive me. Although I’m very young ,but I’m a very serious collector of old things.By my father’s friends who around world,I collected many interested things like old memory boards from Russia ,like I will show you soon. If you know some information of this memory board like where does it form , please write your knowledge under this post. what’s more, I am still don’t know what is... Read…
V
Dear All! I have currentlx issuess with a BA23 setup containing in Slot #1: KDF11-A (M8186) 11/23 CPU Etch revision D Slot #2: MSV11-D (M8044) 32kWords MOS Memory (configured starting from address 0) Slot #4: DLV11-J (M8043) 4xSLU including console port no Boot ROM. I can write and read from registers and memory locations from ODT. When I try to execute programs using <ADDRESS>G, it does nothing and returns to ODT (like if HALT button is pressed). But if I try to execute them... Read more
V
I first wondered whether I could write a scrolling demo on the Tektronix 4404 30+ years ago as a postgrad. This week I thought I put that to bed finally!
V
Hello Anyone can create dos boot disk for victor vicky portable? I am in USA
V
I recently ordered a few parts off of eBay, and in the box was a card for something called "HIDTwister". If looked interesting and I went to the link. There is a video of it in use and it seems like something right up the 'vintage computing alley'. Part of the video shows it being used with an Apple keyboard and mouse being hooked up to an IBM PC. Something I'll keep a link for if a need ever arises. HIDTwister.com if anyone is interested.
V
Greetings everyone, I'm restoring a PDP-11/34A in a BA11-K mounting box. The box still has its inner slides with the tilt mechanism (the older grey, phosphate-coated Chassis Trak type with the half-moon tilt plates), but the outer/intermediate rack members are missing. The correct part is General Devices C-230-S-122 (22"). In Europe it's only available in a minimum quantity of 10, which comes to about a staggering €5,600. The C-230-S-124 is easier to get, but it requires some adaptations...…
V
I'm working on a Model III that has the bracket the rear screw attached to missing. Does anyone have a parts machine that they might be willing to sell the bracket. Baring that a good picture of what's missing or measurements to make a new one would be great. I assume it mounts to the top of the card stack. Thanks, Todd
V
Hello All, I am on a mission to track down the details of this ECO, which, as I understand it, is applied to an etch rev D to correct an IO register addressing anomaly. The information I have regarding this problem and ECO is from one of the micronote documents, which is quoted below. I have both an etch rev D module (5013216D-P1) and etch rev E module (5013216E-P1), and I am determined to track down the details of the ECO. Here is what I have done so far: Using the MP-00586... Read more
V
I recently got an Olivetti ETV300, sadly it was not the complete word processing system, with monitor ad typewriter with its LCU to interface to central unit. Later i got a working ET111 also but its missing the LCU. Its not unusual here in Italy to get an incomplete ETV300 system, so the reason of this post: my machine turns on a repeatedly seeks drive, in what i believe is an attempt to boot. I plan to decode video interface signals and possibly adapt a monitor of some kind first, to get...…
V
Hello VCFED, I was given this 5.25" Floppy drive from a friend for repair. Symptom (on their computer) it was able to read disks, but not write to them. It would claim the Disk is write-protected. I brought the drive home, attached it to my workshop computer. which still has a floppy controller and supports 360k - 2.88MB Disk drives (5.25" and 3.5") [Foxconn G41M Series Motherboard] I configured the Floppy Drive's Jumpers for the PC-AT Setting according to the jumper settings for... Read more
V
I just purchased a Newtech Model 6 Music Board reproduction and see test routines in manuals and newsletters which are line# listings. Did anyone type those in and save somewhere ready for assembly ? Maybe an OCR for editing ? CPMUG archive ? My test system is a CCS 2200 Z80 with 8" drives ready to go. My Google-fu may not be good enough.
V
Hello – running Windows 95 on the IBM5150a with inboard386/pc – that had to come – and now here. One could argue that world peace or environmental challenges are more sensible ways to spend your spare time. But this is my hobby – the old IBM5150 and getting the most out of it (see my other links *** below). Well, Mike1978, me and AI-Claude made it happen. Here is – in short – the story. Back in March, both Mike1978 and I looked separately at AI , to help with these old... Read more
V
Hey guys, long ago, I used PC320 on our Windows clients to acsess resources on our VAX/VMS system (1998 or so). For nostalgia sake, I wanted to find a copy for my own use on my Windows 95 system to connect to my VAX/VMS system. I have looked and it is now abandonware. I have tried to find it everywhere, BitSavers, Internet Archive, and I just cannot find a copy anywhere. Does anyone out there happen to have a copy of it? This is only for my own, personal hobbyist use. Any help, leads... Read…
V
Greetings - I am looking for a schematic for the 7" CRT monitor that's in an Osborne Executive. I thought I have found one online not to long ago but I can not locate it anymore. All that turns up is the schematic for the Osborne 1 monitor which isn't the same. I have found a link in another VCF post but that link is now dead. I am working on giving this monitor life again and I have posted about this back in November but had to put this project on hold as I had other projects I wanted to...…
V
Hi All, I'm in the need of some help. I recently acquired a PS/2 Model 70 386 (8570-E61) in decent condition with the exception of the hard drive. From what I have been reading these DBA-ESDI drive are hard to come by. What are the recommendations or alternatives to getting a working drive in this system?
V
I'm looking for any Manuals or Pictures of the NCR 7200 Series to include the NCR BASIC Cassette Tape. I'm really interested in the NCR 7200 Model VI. Microsoft developed the BASIC Cassette Software for the NCR 7200 Series and I'm trying to find more information. Is "NCR BASIC +6", Microsoft Altair Extended BASIC for the NCR 7200? I have the Microsoft Catalog from December 1977? that mentions the NCR 7200 Series and Cassette BASIC. The Catalog also has a drawing of the NCR 7200 . See... Read…
V
I picked this up from a haul in July 2020 and finally powered it up. Apparently, i860 workstations aren't at all common. I got truly lucky, and got the hard drive to spin up on the third try (I think it either had dried lubricant in the bearings or maybe stiction). In either case, I was able to image it on ZuluSCSI and then skimmed through it with a hex editor, and it looks like OKI UX is mostly there. I'll know soon enough when I try to boot it up. Some pictures of this rare machine, which...…
V
I've been writing an operating system for my GRiDCase 1520, and I have gotten far enough that I would like other people to try it. It's called Lodestone. It's intended to be fully DOS 3.30 compatible, and it's written in assembly. It boots from floppy or from an EPROM in the application ROM socket. It can run the usual DOS software, and its file access is quite a bit quicker than both GRiD MS-DOS and FreeDOS. My floppy benchmark, for example, takes about 85 s on Lodestone against 289 s on...…
V
I'm new to this forum and I'm stunned that I didn't find it earlier, but I finally think maybe I've found my people. Anyway, just for fun I want to see if I can stump @Chuck(G) since someone said: - - - - - - - - - - - - - Do you seriously know everything about PCs- hardware and software? I'm half-convinced that you do. I think I've yet to see a thread where you don't know the answer (maybe I should look harder?)! - - - - - - - - - - - - - So here we go, DougM
V
So I've got this IMSAI 8080 I scored on ebay for $499. Did not come with the MPU-A. It originally had some z80 stuff in there. I have since configured it with an MPU-A and 4KRA board. Right now when I run Kill the Bit with the mod to use the IMSAI's output LEDs, I get this. If I modify the program to disable checking the input switches, it does this. I have read that some CP-A boards had some kind of issue where when S100 standardized pin 53 as ground, they had to cut the... Read more
V
I was privately contacted through this forum by an employee of Maune Raichle Hartley French & Mudd, LLC. This legal group only does Mesothelioma and Asbestos Exposure cases. They are looking for brake information on DEC TU10/TU16 tape drives. I imagine that they are trying to prove that the brakes in these tape drives contain asbestos and kill people. I am not inclined to help this kind of legal group in any way. If you are interested in talking to them I can forward the contact information.
V
This is a simple hack/test to use the OSCAR64 C compiler to build a simple hires program "bbchi.c" for the BBC-B. https://github.com/orac81/miniapples/raw/refs/heads/main/bbc/bbchi-oscar64.zip (Note, this is work in progress, see below) Oscar64 is a (relatively) new optimising C compiler for the Commodore 64. Despite being small (it can fit on a floppy), it compares well with the best 6502 C compilers like LLVM-mos, VBCC, CC65, etc. It uses a "whole program"... Read more
V
I AM TELEPATHIC! MORE HUMOR FROM THE ARMAGEDDON BBS armageddonbbs.net:2300
V
I've been looking to convert something to Colorplus 16 color mode so I can increase the game library for my XT, which runs V20 at 7.15 MHz. Converting EGA games as they are, if they need a mid or high 286 CPU to run kinda beats the purpose of Plantronics that was deployed on machines of earlier generation. Started with Keen Dreams. Its CGA version runs OK on turbo XT. Told Opus to convert EGA assets to Plantronics native format, and change everything needed in CGA version to show... Read more
V
Finally I have a VAXStation I with all parts just lacking the BA23. I started to wonder what storage to attach. I do not want to go for the RQDX Controller, but RQZX1 seems not to be supported. Maybe a CMD SCSI Controller or someone using QBone?
V
Hi, I'm looking for an IBM 5083 Model 1 digitizer tablet (PN 6248426) and the matching cursor (PN 6248428). I'm mainly looking for the Model 1, but may be interested in other models as well. Please reach out if you have one or know of any leads. I'm located in the Bay Area, but am also happy to pay for shipping from anywhere in the US.
V
A fairly obscure system caught my attention. At first because it had an incorporated cassette deck and I love cassette decks. The plan was to retrofit an emulated system into this and use the cassette as storage as I dig the form factor. However, after a bit of research, I found someone had dumped one of the cassettes to the Archive. So while my unit is on the way, I began doing some analysis on the cassette tape. The tape holds recorded audio on the right track and data on the left track...…