E
Research by Columbia University faculty in the Arts and Sciences and the School of Engineering and Applied Science has revealed a new insight that challenges long-held assumptions about the fundamental chemistry of lithium-ion batteries.
E
A new study led by researchers at The University of Manchester has provided the first plant-wide assessment of chemical looping reforming, an emerging hydrogen production technology that combines hydrogen generation with built-in carbon capture.
E
A team of researchers in India has developed a new compound capable of releasing both hydrogen and methane when heated at low temperatures. In their new study, published in Science Advances, the researchers show how this new compound can provide a foundation for creating recyclable molecular compounds for storing and delivering alternative fuel components.
E
As the effects of climate change and the associated risks are increasingly being felt, several organizations have developed roadmaps that outline potential steps toward carbon neutrality in the aviation sector. These strategies include multiple levers, such as developing alternative fuels and introducing more efficient aircraft, and are supported by the International Civil Aviation Organization (ICAO), the Air Transport Action Group (ATAG) and the European Commission, among others. They are…
E
A research team led by professor Seong Kyun Kim of the Department of Physics and Chemistry at DGIST has developed a "passive cooling film material" that uses moisture in the air to cool electronic devices—no water or electricity is required.
E
A research team led by professor Wonyoung Lee of the School of Mechanical Engineering at Sungkyunkwan University (SKKU) has developed a technology that addresses interfacial contact resistance, a key factor limiting the performance of protonic ceramic electrochemical cells (PCECs), a next-generation clean energy technology. The new approach improves both the energy efficiency and durability of the cells.
E
Chemists developed a way to significantly improve the performance of light-emitting diodes (LEDs) made with perovskite. The journal Nature published the advancement in these hybrid LEDs, which hold potential for a range of uses, including biomedical sensing, low-light imaging and automated facial recognition.
E
Thanks to the exponential rise of AI, the rapid construction of large, gigawatt-gobbling data centers across the country has stoked concerns about how the power grid will hold up under this additional strain.
E
Solar panels that can be coated onto thin, flexible surfaces could one day be made the way newspapers are printed, at room temperature and without the toxic chemicals the process has relied on, claim researchers from the University of Surrey.
E
When trying to figure out a better design for a bacteria-powered biobattery, Binghamton University researchers found inspiration in nature—specifically, the insides of our small intestines.
E
A U.S. soldier may carry up to 20 pounds (9 kilograms) of batteries to power communications equipment and other electronics on missions. New research from FIU could help lighten that load. A team of engineers has developed a dual-use, razor-thin solar device that can harvest sunlight to generate electricity and also produce light.
E
A new study by researchers, including those in Worcester Polytechnic Institute's Department of Chemical Engineering, has found that the fastest-growing plant on Earth may offer a sustainable and cost-effective alternative to petroleum-derived transportation fuels.
E
Asphalt containing recycled plastic held together better than conventional asphalt and showed a lower level of plastic-like particles after combined traffic and moisture-related laboratory testing, according to a study led by Penn State researchers. The findings suggest that improved pavement durability may help limit particle release, the team said, but field studies are needed to determine whether the same pattern occurs on real roads.
E
Hydrogen is expected to become an important energy carrier of the future, particularly for industrial applications. But this requires climate-friendly technologies that split water into hydrogen and oxygen. One major challenge is cost: PEM water electrolysis requires components that can withstand highly corrosive conditions. Some of these components are coated with platinum.
E
The cladding tubes of the fuel rods used in nuclear reactors must remain leak-tight—despite the risk of corrosion from the surrounding cooling water and despite the radiation they are exposed to during operation. It is therefore important to know how quickly corrosion layers form and how porous they are.
E
A new battery binder—the glue that holds together a battery's internal parts—could make lithium-ion batteries more environmentally friendly and easier to recycle without sacrificing performance.
E
Around half of the energy used to train AI can be saved without affecting speed or performance, using software developed at the University of Michigan Engineering. Now, U-M researchers are working with NVIDIA to integrate their new approach into Megatron-LM, NVIDIA's open-source platform for training AI.
E
Zinc-air batteries can store significantly more energy than lithium-ion batteries, but until now have been virtually impossible to recharge. A team led by Professor Jörg J. Schneider from the Department of Chemistry has now demonstrated how a material made of iron, nickel and carbon enables the battery to be charged and discharged up to 500 times.
E
Wind turbines, devices that can convert energy from the wind into electricity, do not burn fuel during operation and could thus reduce greenhouse gas emissions. Despite their possible environmental advantages, building these devices depends heavily on the mines and factories supplying the metals they are made of.
E
A team co-led by researchers at the University of California San Diego has developed a new way to make perovskite solar cells—a promising next-generation solar technology—more efficient and durable. By creating a temporary liquid while the material crystallizes, researchers were able to grow perovskite crystals that were larger, more uniform and contained fewer defects.
E
Heating and cooling buildings account for a large portion of global energy use. A research team in the Texas A&M University Department of Materials Science and Engineering was featured on the cover of ACS Applied Materials & Interfaces for a study that aims to reduce that energy consumption.
E
To mitigate climate change, direct air capture of carbon dioxide (CO₂) from the atmosphere has emerged as an increasingly attractive option for limiting global warming. But scaling up systems to remove and safely store enough CO₂ faces major obstacles, according to researchers at the Georgia Tech School of Chemical and Biomolecular Engineering (ChBE).
E
Researchers from Nagoya University in Japan have developed a durable fuel-cell catalyst by wrapping platinum nanoparticles in nitrogen-containing graphene and placing them on carbon nanotubes. This design retained 96.9% of its active surface after 30,000 durability cycles, pointing towards fuel cells with longer lifespans and lower platinum demand.
E
Most electricity is generated by using heat to produce steam, which then turns a turbine. Although this approach performs exceptionally well in the high-temperature, superheated-steam regime, we currently lack widely applicable technologies that can exploit the much more abundant resource of low-temperature heat.
E
Solar cells absorb sunlight and convert it into electricity. This process, however, is not perfect, and a large part of the solar energy is simply lost along the way. Some of it is lost as heat, while photons with insufficient energy pass through the cell without generating electricity. These are the sources of loss that most scientists in the field try to minimize, but there is another important one known as Boltzmann loss.
E
Wireless charging has already transformed how people power phones, wearables and even electric vehicles. The next leap is to advance wireless technologies beyond delivering electrical energy to directly producing nonelectrical outputs, such as optical, thermal and mechanical energy, according to actual needs. This would create an energy delivery network as flexible and efficient as the internet.
E
Oregon State University scientists have filed a patent application for a new carbon-capture material that turns water in factory flue emissions from a problem into an advantage.
E
Water electrolyzers are promising devices that use electricity to split water into hydrogen and oxygen. If powered by solar cells or other renewable energy technologies, they could contribute to the sustainable production of hydrogen used to make ammonia, which in turn is used to produce fertilizers and other valuable compounds.
E
Anyone calculating how much electricity an offshore wind farm will deliver looks at the wind and not at the clouds. Researchers at the University of Twente show that this leaves part of the yield unaccounted for. Low cloud cover speeds up the recovery of the wind behind a wind farm and can benefit the next farm in line.
E
What if the energy powering your home or office could be generated, stored and used all in the same place? This is the hope for the next generation of buildings, powered by renewable sources with energy stored nearby—possibly even within the concrete used to construct the building itself. Reporting in ACS Nano, researchers have developed an efficient, energy-storing cement supercapacitor that holds up as well as commercial concrete in tests.