E
Scientists at the Brazilian Center for Research in Energy and Materials (CNPEM) in Campinas, São Paulo state, developed an instrument for the Sirius particle accelerator that can observe the interior of solar cells on a nanoscale while they are operating. Rather than analyzing isolated components in a laboratory setting, this new platform enables the evaluation of complete devices generating electricity under real operating conditions. It simulates daily exposure to light, heat and humidity.
E
According to projections, the volume of digital data created, captured, copied and consumed worldwide will reach 175 zettabytes (ZB) in 2026. This is equivalent to the storage capacity of billions of hard drives, such as those found in our laptops. With the rise of artificial intelligence, this global 'datasphere' continues to expand at an exponential rate.
E
Vitamin B12 is essential for the body's proper functioning and is found in foods of animal origin. It is produced by certain bacteria that, in addition to being found in nature, are cultivated at industrial facilities for commercial use, primarily by the food and pharmaceutical industries. It is beneficial when certain nutritional deficiencies are present, and in recent times it has become popular, along with other B vitamins, as a remedy for hangovers, as it can help reduce fatigue.
E
When processing and producing non-English text, generative AI burns more energy and sometimes provides less accurate answers, potentially reinforcing existing global inequalities, according to University of Michigan Engineering researchers.
E
Making more efficient, longer-lasting lithium-ion batteries has been a challenge for researchers because adding more mass to the batteries restricts how fast electricity and lithium ions can move. To overcome this challenge, a research team has added graphene mesosponge to batteries to improve their performance during fast discharge. Their results show that graphene mesosponge is highly effective at improving the energy and power densities of commercial lithium-ion batteries.
E
A Korean research team has developed a transfer printing process that enables solid electrolytes, a key component of solid-state batteries, to be fabricated as very thin, uniform and defect-free layers over large areas. The technology is expected to provide a foundation for the large-area manufacturing of high-energy-density solid-state batteries.
E
A research team at The Hong Kong Polytechnic University (PolyU) has found a previously overlooked cause of aging in perovskite solar cells exposed to light. The team has also developed a solution that effectively extends the cells' lifetime, an important step toward bringing the technology to market.
E
Understanding how ions move through solid materials is key to advancing technologies such as batteries, fuel cells and sensors. A team of scientists led by the U.S. Department of Energy's (DOE) Argonne National Laboratory has demonstrated a cutting-edge method for gauging the activity of ions, revealing a new level of detail about how they move and interact.
E
What if the dirtiest water in town could help pay for its own cleanup? That is the question that started our project. Sewage is full of hungry bacteria. It also carries leftover medicines, including antibiotics like chloramphenicol, stubborn molecules that conventional treatment can struggle to remove. Most people see a waste problem. We saw a small power plant and a chemical factory hiding in plain sight. Our study is published in the Journal of Power Sources.
E
All-solid-state batteries (ASSBs) are emerging as promising candidates for next-generation energy storage technologies because they use solid electrolytes instead of liquid electrolytes, offering potential advantages in safety and energy density. However, lithium (Li)-based ASSBs can suffer from instabilities caused by nonuniform plating and stripping of Li metal during operation.
E
Understanding how battery components work at the molecular or atomic levels can help scientists create faster-charging, more powerful, longer-lived storage devices. But the electron microscopes powerful enough to give this view also change and distort the materials in ways scientists must cautiously appreciate.
E
It's hard to ignore the difference: You can fill a car's tank with gas in mere minutes. Charging the battery of an electric vehicle (EV) can take 30 minutes or more.
E
Solar cells generate electricity by absorbing sunlight in a thin layer of perovskite, a light-absorbing material. This layer is made with a liquid solution that dries and crystallizes into a solid film, but small changes in temperature, humidity and other conditions can affect the film and the performance of the solar cell.
E
Solar cells, devices that can convert sunlight into electricity, are now widely used in many countries worldwide. While most cells on the market today are primarily made of silicon, energy engineers have been exploring the potential of other materials that produce an electrical voltage when light is directed at them.
E
Tin is able to exchange four electrons as it changes between dissolved ions and solid metal, but acidic tin batteries commonly use only a two-electron reaction, leaving half that potential charge out of reach. Now, researchers in China have shown that changing the liquid around the tin could capture that extra capacity.
E
TenneT Germany, the largest transmission system operator in Germany, has observed over several years that the frequency in the European power grid dips briefly every 60 seconds. While these deviations were not critical to grid security, they were clearly measurable and unusually regular. The cause of this phenomenon was initially unclear.
E
Every electronic device, factory and vehicle generates heat that often goes to waste. What if that energy could be recovered to generate electricity using thin films manufactured without high-temperature processing? Researchers at Tohoku University have taken a step toward making this possible, developing a thermoelectric material that delivers a 250-fold increase in power factor by adding a small amount of titanium to chromium nitride.
E
Cornell researchers, working with upstate New York battery company Charge CCCV, also known as C4V, have developed a real-time diagnostic approach to improve one of the most expensive and time-consuming stages of lithium-ion battery manufacturing: forming the battery.
E
A sleek, pilotless, solar-powered airplane that soars through the atmosphere to monitor climate or track wildfires was once just an idea. Now, these high-altitude specialty aircraft are advancing from early prototyping demonstrations toward potential commercial applications, supported by decades of research and development involving Harvard scientists, aerospace engineers and industry collaborators.
E
Lowering the cost of green hydrogen production requires catalysts that produce hydrogen efficiently while using smaller amounts of expensive precious metals. A Korean research team has developed a catalyst that brings three or four ruthenium (Ru) atoms together so they can work cooperatively.
E
The periodic table contains more than 100 elements. Combine them in different ways, and the possibilities quickly multiply. For researchers designing materials for advanced nuclear reactors, the abundance presents an opportunity: Could entirely new combinations of elements produce stronger alloys capable of withstanding the extreme heat, radiation and mechanical stress inside a nuclear reactor?
E
A study led by the University of Oxford has identified a novel semiconductor that overcomes a key limitation of light-harvesting materials. The results, published today (Oct. 28) in Nature, could enable more efficient solar panels with higher outputs.
E
Gathering lithium, a crucial element in batteries for smartphones, electric cars and the electrical grid, is a time-consuming and energy-intensive process, but new technology could make it much easier.
E
Many electronic devices use flame-retardant plastic as casing in order to reduce the risk of electrical fires. This plastic is formulated using a metal called antimony along with organic bromide compounds. In fact, 39% of the world's antimony is used to create flame-retardant plastics, most of which will eventually end up as part of the tens of millions of tons of electronic waste generated each year.
E
What if a battery could become more powerful as it ages? Much like wine developing a deeper flavor over time, researchers in Korea have uncovered the mechanism behind a battery material that can deliver greater usable capacity after repeated charging and discharging.
E
A research team at The Hong Kong University of Science and Technology (HKUST) has developed a dynamic integrated interface engineering strategy that enhances the energy density and stability of anode-free lithium metal batteries by reconfiguring key battery interfaces.
E
Many chemical processes require hydrogen, which is still being produced from fossil fuels. A protonic ceramic electrolyzer cell (PCEC) is a device that can produce hydrogen from water at temperatures that match key industrial processes. Researchers at the University of Groningen recently showed that careful coordination of materials in such a PCEC can double the production of hydrogen with the same electricity consumption. The results are published in Energy and Environmental Science on Oct.…
E
The rare earth elements that help power electric vehicles, wind turbines, medical imaging machines and other advanced technologies may be hiding in an unlikely place: industrial wastewater.
E
With artificial intelligence (AI) data centers consuming electricity at a growing rate, identifying a sustainable computing solution to offset these massive community and environmental disruptors is proving critical.
E
The start of a new battery materials library could pave the way for future AI models to help scientists design sodium-ion batteries that charge faster, last longer and store more energy, according to new research from the University of Surrey.