XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

Installing and Upgrading FreeBSD

Installing and upgrading the FreeBSD base system. Do not post questions about ports or packages here.

ftpd deprecated in 15; docs lag

Much to my suprise I discovered today that ftpd is deprecated and no longer in the default installation. tftpd, which allows anonymous logins, is in. This seems like a less suitable alternative to me. Also the docs seem to lag a bit concerning this issue: https://docs.freebsd.org/en/books/handbook/network-servers/#network-ftp Has anybody any thougts on what non-deprecated ftpd-flavour in the portstree would provide the same functionality as the good old ftpd?

Dual-booting FreeBSD 15.1 alongside Gentoo on a shared UEFI disk

I’m about to install FreeBSD 15.1 on a new laptop that already runs Gentoo, and I’d like some advice from people who have done this on a dual-boot machine. This won't be a daily driver. It’s a test system to make sure my personal C projects build and run on FreeBSD, and just to keep up with what’s happening with FreeBSD in general. I realize I can do this with a VM, but I prefer a bare-metal system that I can use to explore and learn with. I'd prefer relatively-low maintenance, so I’ll be using…

Release 14.4 update to 14.5 or upgrade to 15.1

Greetings all, I have been using release 14.X from 14.1, but updating today, I received a warning regarding upcoming EOL. As I do not anticipate to add/change hardware, should I continue with updating to 14.5 or bite a bullet and upgrade to 15.1, given that I will eventually do the upgrade next year? Maybe a different way to ask the question, given the unchanged hardware, is the 15.1 mature enough that I will not have a problem? Kindest regards, M

Check/compare current MBR bootcode before updating?

I installed MBR on entire disk, and have these commands: Code: gpart bootcode -b '/boot/mbr' 'ada0' Code: gpart bootcode -b '/boot/boot' 'ada0s1' I'd like to do something before those as a check to see if either need updating. On EFI I have: Code: rsync -a --no-times --checksum '/boot/loader.efi' '/boot/efi/EFI/freebsd/loader.efi' rsync -a --no-times --checksum '/boot/loader.efi' '/boot/efi/EFI/boot/bootx64.efi' loaders-update looks like it does a compare with something in /dev:…

How to track the "Security" branch rather than "Release" branch? Why not?

Perhaps I don't quite understand and someone can enlighten me. I have installed the current, "release" version of FreeBSD. I see on the wiki at: http://www.freebsdwiki.net/index.php/FreeBSD_Release_Branches , it says "If stability is the most important factor on this system, you may want to track something called the security branch. This branch only updates for security updates and major bug fixes from the code you originally installed." This sounds like exactly what *I* want! I'd have the…

Kernel modules conflict

Hello lovely community. This happened after I switched ports tree to Q4. I managed to upgrade all ports with portmaster (except devel/appstream which ran into some hiccups), but I decapitated my working plasma desktop, because amdgpu.ko won't load by any means. Boot-time message says: KLD amdgpu.ko: depends on kernel - not available or version mismatch Click to expand... When I run Code: # kldload amdgpu kldload: can't load amdgpu: module already loaded or in the kernel Code: #freebsd-version…

Upgrading 15.1 to 15.2 with NVIDIA DRM/Wayland

I’m on FreeBSD 15.1-RELEASE-p3 with an NVIDIA RTX 2060. Plasma 6.7.5 Wayland is already working with nvidia-drm, drm-612-kmod, nvidia-drm-612-kmod, and seatd. When FreeBSD 15.2 is released, is the expected upgrade path simply to follow the normal pkgbase upgrade procedure. and then update the matching 15.2 kernel modules from FreeBSD-ports-kmods? In other words, assuming the 15.2 repositories provide properly built drm-*-kmod, nvidia-kmod, and nvidia-drm-*-kmod packages for 15.2, should there…

pkg repos for 15.1 should exist?

As Im understanding now, there should be or will be https://pkg.freebsd.org/FreeBSD:15.1:amd64/latest someday? (note the 15.1) when that happens it will be automatically updated? or will I need to update them manually? Code: pkg repos 12:52 FreeBSD-ports: { url : "pkg+https://pkg.FreeBSD.org/FreeBSD:15:amd64/latest", enabled : yes, priority : 0, mirror_type : "SRV", signature_type : "FINGERPRINTS", fingerprints : "/usr/share/keys/pkg" } FreeBSD-ports-kmods: { url :…

How to enforce completely automatic upgrades?

I'm completely new to FreeBSD and wanted to challenge myself by using it. I was going over the Handbook and on the Updates and Upgrades section it says: The system can be configured to automatically check for updates once every day by adding this entry to /etc/crontab: @daily root freebsd-update cron If patches exist, they will automatically be downloaded but will not be applied. The root user will be sent an email so that the patches may be reviewed and manually installed with freebsd-update…

pkg Authentication error

On a few hosts, as outlined in this blog post, I am hitting messages such as this during pkg upgrade -r FreeBSD-base - typically, I just restart the command it proceeds. This happens during the download of the packages. Code: [ 8/74] Fetching xxhash-0.8.4: 100% 107 KiB 109.2 kB/s 00:01 [ 9/74] Fetching protobuf-c-1.5.2: 100% 149 KiB 153.1 kB/s 00:01 pkg: https://pkgmir.geo.freebsd.org/FreeBSD:15:amd64/base_release_1/Hashed/FreeBSD-audit-dbg-15.1p4~29b2a2d6d8.pkg: Authentication error After…

BSD Installation: An Outdated Mess That Nobody Wants to Fix

I’ve tried installing a lot of different operating systems, but I have honestly never seen installation processes as difficult, outdated, unnecessarily complicated, painfully long, and frustrating as those of the BSD operating systems. I’m genuinely asking out of curiosity: is this ridiculous installation process just some ancient legacy that nobody has bothered to modernize and make understandable, or are you simply too lazy to fix it? Or perhaps you just don’t know how? Look around.…

installing 15.1 to an USB stick with bootable EFI

Hi all, have just installed FreeBSD 15.1 to an usb stick, now I see that has no EFI boot mode, which I would prefer as bootable from any pc (only usb stick containing EFI partition are detected as bootable by some pc). In the installation menu I did not see any choice for it, and ask if you could kindly instruct how to perform this. Please also consider I'm not smart about Freebsd. Thank you much

Installer (and then install) freezes on ThinkCentre M73

Greetings, I have a Lenovo ThinkCentre M73 (SFF). I've previously installed Slackware on it and also OpenBSD without any issues. I use a ventoy-ed USB thumb drive that never gave me any problems (so far). I've also tried using the .iso and the .img raw on another thumb drive, the result is always the same: as soon as the installer shows the image with the boot options and 10s countdown it freezes. I have to hard-reset the PC. After a brief stint learning about PXE, TFTP, DHCP, NFS i got the PXE…

Set terminal type during unattended install?

I repackaged a 10.3-RELEASE installer, and added etc/installerconfig. The preamble section looks like this: Code: PARTITIONS=vtbd0 DISTRIBUTIONS="kernel.txz base.txz" I'm able to use bhyve to boot into the installer, and the process executes automatically, as expected. The only issue is that I need to manually enter the terminal type before the installer will begin. I was unable to find a solution to this in the bsdinstall manpages or through a few hours of fruitless searching. There's got to…

Proposal: a pkg upgrade mode that never silently drops installed packages

Hello to everyone. I realized that when I do a "pkg upgrade",some installed packages silent drops : it means that they are removed without notice. For this reason,I asked Claude to elaborate a strategy for making a better upgrading / installing packages strategy. Since I do "vibe coding",no one will be interested to the code I produce,so I will not be involved personally in this project. Anyway,I want to propose the plan to someone that can code it personally,using his brain : So,this is what…

Shared object "libsys.so.7" not found

Yesterday I tried to upgrade FreeBSD from version 13.x to 15.0-RELEASE However, I now get this error : freebsd-update ld-elf.so.1: Shared object "libsys.so.7" not found 'What I've tried so far' : I tried Craig's solution mentioned here : https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=289769 But that entire rescue path mentioned, doesn't exist. Also, there's no Wi-Fi connectivity and so, even though if the rescue path were to be created, how would I download the patch ?

cannot run latest FreeBSD on a 15 year old PC

The specifications of the PC can be found here; it's an amd64 motherboard. I did install FreeBSD on it successfully many years ago, version 12 or 13, I don't remember exactly. I decided to revive it by installing the latest version, 15.1. The installation goes well but after rebooting when the installation has completed I see message Loaded only 545k in a loop on the screen. I tried installing version 14.5 but the result is the same. Please let me know if you want me to provide more detailed…