1995-1998 Honda Odyssey: Why my radiator fans is running all the time?
Why my radiator fans running all the time
Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.
Why my radiator fans running all the time
achanak se display kharab ho gaya, light toh jal rahi hai lekin display black hai aur phone on nahi ho raha. Kya aapne ise restart karne ki koshish ki thi?
I know it's a bit odd I called these printers semi disposable but the amount of sales and subsidies Brother probably gives retailers to do ti all the time means I can buy another one when they break. Commercial MS units like the MS5 and MS6 can sometimes be repaired but those aren't 40-50% of the cost of a new one in parts.
@chasetaggart chek your glove box for your fuse box. The fuse for the tail lights is the #7 fuse, check it and let us now what you find out
@unknown44604 at minimum, you would need to measure the charging port to see if your motherboard even gets power. Your Dell has a dedicated power port. Remove the base cover and unplug the power port. Then, plug the AC adapter in, check the end of the power connector, and measure the voltage there. If it does not have any continuity, then you know it is your port that needs to be replaced (prime suspect). If it does show that it has power continuity, then the issue will be with the charging…
My vector is not working even when I do a hard firmware reset
Hi everyone, I am having a severe power issue with my Apple Watch Ultra 2 and could use some advice from the community before I decide to open it up. The Symptom:When the watch is off the charger, it remains completely closed (black screen) and is totally unresponsive. However, the moment I place it on its magnetic charging puck, the Apple logo appears on screen. It then enters a constant bootloop—repeatedly flashing the logo—and the exact second I lift it off the charger, the screen instantly…
@calebtaylo49272 we can't help you without seeing what you are referring to. Adding images to an existing question.
@zopairm since iFixit does not yet have a specific guide for that use the one from here It is written in French so use a browser that can translate it for you if needed. Replacement screens are readily available at many online stroes. While you work on your phone, take lots of pictures. Once you are done with it, take those pictures and create a guide for iFixit. That will help the next person who has the same issues with their device. It's easy and fun to create these guides.…
@antariksap15632 what error did it show you? What have you already checked and what have you already tried? Translation @antariksap15632 pesan kesalahan apa yang muncul? Apa saja yang sudah Anda periksa dan apa saja yang sudah Anda coba lakukan?
"The Galaxy S21 Ultra is having network issues; SIM 1 has no signal."
When set to Mode P and ISO 100 (or any other level) when I press the shutter button it does not focus and then shuts down the camera. Do you know how I can rectify this issue?
καλησπέρα έχω και γω το ίδιο πρόβλημα ποιος μπορεί να. βοηθήσει;
Hi! Sorry had not noticed the pics weren't attached. They are now. Thanks.
"Unspecified device" under Other devices means Windows has not attached any driver to the printer yet, and the failed package install is usually a leftover partial install getting in the way. What tends to work: Unplug the USB cable.In Settings > Printers & scanners, remove every L120/L121 entry. Then press Win+R, type printui /s /t2, and on the Drivers tab remove any EPSON L120/L121 driver packages left behind.Download the driver for the exact model and your Windows version (64-bit or 32-bit)…
Blank pages in every colour, one after another, usually means the print head nozzles have dried or clogged, not that the ink is gone. Epson's L3250/L3251 User's Guide gives this order: Nozzle check from the buttons: turn the printer off, load plain paper, hold the stop button and press the power button, then release both when it turns on. It prints a test pattern.If the pattern has gaps or is faint, clean the head: hold the stop button for five seconds. The power light flashes during the cycle.…
@anthonylevy you could try and bake your main board :-) Do an online search for that.
@karinatownsend - Are you sure the headphones work? A base type issue is move likely a headphone issue,
Does anyone know how to repair the ink tank/ink regulator of an Epson M1120 Wi-Fi? The ink is not flowing to the outlet side of the tank. I tried using a syringe to check whether ink could be drawn out. The first time, some ink came out, but after that no more ink would flow, and the syringe plunger snaps back very strongly as if there is a vacuum or blockage. There is still plenty of ink remaining inside the tank, but when printing, the ink does not reach the printhead. As a result, the…
I get nothing. I believe its the main board but I was trying to see if there was any possible way it could be a cheaper fix. 😅
oldturkey03, good day. Just a brief update. The team at ifixit shipped me a replacement battery a couple weeks ago and I finally had the time to install it. The battery arrived at about 10% charged, so I plugged it in and let it charge overnight and then I let it drain down to about 5%. After the laptop cooled, I charged it overnight and ran a battery report. Results were 100% and 76000mWh; exactly as rated. I repeated the draining and charging of the battery one more time with the exact same…
@lallasuliya could be a bad screen. what have you already tried? ho sakta hai ki screen kharab ho. aapne ab tak kya-kya koshish ki hai?
@anthonylevy okay have you tried the individual steps? What does your digital optical audio port show when you do that? This does sound like a bad main board
@briankight since you already "Replaced the main board and the t-con board" the only thing you have left are failed Buffer boards. Those are the long skinny boards that connect directly to the LCD panel. You could always try a "Tape-Off" Check something like this video and see if that makes a change. Let us know what you find out.
I am trying to reassemble the Nintendo GameCube lid mechanism (the gear system and spring components that control the opening/lifting of the disc cover). I have all the pieces taken apart, but I need instructions on how to properly align and reinstall the lid's internal gear, spring, and latch mechanism into the top shell.
@deidaraeida If your Samsung says "No Service," the phone recognizes that a SIM card is in the tray, but it cannot establish a connection to your cellular network. Check to see if it is your phone or the Sim card that gives you this issue. Remove your SIM card and put it into another unlocked phone. Or of course you can take a known-working SIM card and insert that into your phone. If your SIM card says "No Service" in a second phone, your SIM card is damaged or your account is deactivated, and…
@danielhila28221 same make and model? We will need to see what your screen shows you. What have you already checked and what have you tried? Translation @danielhila28221 É da mesma marca e modelo? Precisamos de ver o que aparece no teu ecrã. O que já verificaste e o que já tentaste?
Replaced the main board and the t-con board and it’s getting colored horizontal lines that come and go
@hosanamagubane you picked a Asus A541U as your device. Since the charging light comes on, your power adapter is working and the motherboard is receiving power. The most common cause for a laptop that receives power but refuses to boot is a buildup of residual "flea" power on the motherboard, or a completely dead internal battery that is shorting out the power rail which prevents your laptop from turning on. Try an external power drain first. Unplug the charger and press and hold the power…
@mohamadyahya the cost of this will depend on the exact model and whether a replacement screen is even available. We need to know the complete model number or the panel number. You can get that from the LCD panel itself. Remove the back cover from your TV, and you will see a sticker on the panel that should identify the make and model of the screen. Let us know what those numbers are, or post some pictures of the sticker with your question: Adding images to an existing question Translation…