M
This is an interesting thing: ArtCraft ArtCraft — Controllable AI for Artists ArtCraft is the open-source desktop app for generating AI video and images — built for artists who want real control. The guy coded clones of all the Adobe apps from scratch using AI. Of course not perfect yet, but he spent a few days only. Using this technique it could be possible to “copy” CAD software. He already started and made CADCraft. Good that he didn’t use Rhino as a template. I could’t imagine this would be…
M
I’m trying to understand how vaExportToDWG is supposed to work. I have a Rhino Layout displaying a floor plan and annotations at a defined scale, with dimensions placed directly in the Layout. When I run vaExportToDWG, the command asks me to select which Layouts to export. I select Page 1, but the resulting DWG appears to contain geometry from the Model Space rather than the actual drawing shown in the selected Layout. In fact, the exported geometry closely resembles what I see when switching…
M
Hi, having spent an hour orienting an obj to get it vertical and hrz and at 0,0 etc. to realise it lacks fine detail of original in Agisoft. its a mushy mess, so import decent one from V8 need orient3pt it to the first one, select object to orient and its a bright yellow mass. How can I pick a detail on both this and the original obj when it ceases to show the image as such ? Just how can orient3pt be used on a mesh ??? Steve 9 posts - 6 participants Read full topic
M
Rhino-MCP-Platform 0.3.0: “Unable to load RhinoAI.rhp plug-in: ID already in use” Setup: Rhino 8.35 (Educational Lab License), Windows 11, .NET Core v8 set via SetDotNetRuntime. What I did: Installed Rhino-MCP-Platform 0.3.0 via Yak (yak install Rhino-MCP-Platform) and also once via the Package Manager. Reinstalled after a clean uninstall. Problem: On every start Rhino shows “Error loading - RhinoAI.rhp”. Details: “Unable to load RhinoAI.rhp plug-in: ID already in use.” Loading the plug-in…
M
AM79 FIle: AM240679 Uwrapping not working.3dm (124.0 KB) 7 posts - 3 participants Read full topic
M
Hi, V5 made a custom button, sure I saved the file later on, next day its gone, remake it, deliberately save the file, open another file and its gone again.. Grrrr Steve 2 posts - 2 participants Read full topic
M
These are earlier renderings: I finally got around to pay some attention to the rear details of this little beauty. I needed a curvy model for a little renderer I am having made for fun and this is the first serious test of that engine. Hope you like it. The renderer has the ability to alter the materials too so here are a few tweaks: It’s meant as a quick drop-a-model-and-render type online engine, for those projects you don’t want to spend a lot of time to set up right. 20 posts - 5…
M
snap to occluded objects is off, on shaded mode, worksession-attached geometry still has snaps through a surface, native geometry in the original file doesn’t. looks like the rhino options dont carry over into the worksessioned geometry? 2 posts - 2 participants Read full topic
M
I’ve been testing va on RHino 8, but if it’s installed blocks disappear when selected. So I’m back on 7 but - after round tripping project to Rhino 8 from Rhino 7 and back - my project’s sections have turned into generic non-functioning blocks, and all levels and some styles are missing. 10 posts - 2 participants Read full topic
M
Hi McNeelies, I just noticed that the Grasshopper 1 menus and inactive title bar colors in Rhino 9 Beta do not appear to use Rhino color key/values. Which they do in previous Rhino versions, I think (left: Rhino 8, right: Rhino 9): I might also just not have configured my Rhino 9 advanced keys correctly. If so, maybe you can point me to the relevant ones? Cheers and best, Andes 9 posts - 5 participants Read full topic
M
When duplicating a level in the Level Manager, VisualARQ currently copies only its settings, not the architectural objects. In multi-storey buildings, structural elements, walls, slabs, and often windows are repeated across floors, even when layouts differ. Being able to duplicate an entire floor would provide a consistent starting point, allowing users to modify only what differs. I suggest adding an Include Objects option to the existing Duplicate Level command, while preserving its current…
M
When a block instance component has an empty transformation input, a block instance is placed at the world origin. With a stream filter it can happen that an input is empty and in this case I would prefer a Null output. 2 posts - 2 participants Read full topic
M
Hi, I work as architect and I am trying to use grasshopper to automate my 3d drafting. In sketchup it’s quite easy with make hole in their component. I found a solution to do it in grasshopper that I would like to share ( I am quite new to grasshopper). So all the block of the window are in window layer. All the window void (window void is modeled into the window itself) to solid different in window void folder. Turn off window void folder to have the result. I just dont understand why I need…
M
Pressing the F10 key super quickly runs the ! _PointsOn command once. However, when I press the F10 key for a slightly longer period, it repeats the ! _PointsOn command. I consider this a bug, because it’s a highly unwanted action, a very irritating one. It repeats the ! _PointsOn command by accident, which forces me to press the Esc key quite often to cancel it after I already have the control points of the desired surface(s) on. Putting the ! _PointsOn command inside the list of commands that…
M
52 posts - 12 participants Read full topic
M
I found this older discussion about true dimension chains, which was recorded as RH-38900 back in 2017: [Continued or Chain Dimension] As far as I can tell, Rhino already has a reasonably efficient workflow for creating continued dimensions. A true multi-point dimension-chain object would mainly improve subsequent editing and maintenance. I think this would still be a very useful improvement, particularly for large models and technical documentation. Creation Define the dimension line…
M
So I don’t know if this is applying to anything else but on my specific machine I’m using the Materials tab of the object properties, docked off to the right of my window, to edit an emission material, and trying to type in an ‘intensity’ value results in the input going to the command line instead. 3 posts - 2 participants Read full topic
M
Tested in Rhino 7.38.24338.17001, Rhino 8.35.26251.13001 and Rhino 9.0.26272.12303 (WIP), Windows x64. The input is a mesh box (0,0,0)..(10,6,3) made with Mesh.CreateFromBox (quads, with texture coordinates): one quad per box face in the transform tests (T), and a 2×2×2 subdivision (24 quads) in the input-mesh tests (M), so that triangulation and ngon creation have a visible effect. The attached script runs unmodified in all three versions (IronPython 2.7 in Rhino 7, Python 3 in Rhino 8 and 9)…
M
Hello, I’ve been facing some difficulties regarding wall selection on hidden view. I can select walls on any other view but not hidden. Thought it was my file but its not as I tried on an empty file and have the same issue. The wall intersections with themselves have some artifact, layer lines going beyond visibility and in places that are not intended (middle of wall intersections), using hidden view. Rhino 9 Beta VisualArq 3.12 RC3 Thanks 3 posts - 2 participants Read full topic
M
I haven’t found a way to get this list to refresh or sort alphabetically. Along those lines I notice there isn’t really a standard way to setup dialogs and make sure the symbols and approaches are consistent from one to the other. And sometimes that makes it harder to figure these little things out. 6 posts - 3 participants Read full topic
M
I was having massive crashes with Rhino8 for Mac working with layouts. It was definitely a hefty file (20 layout pages (1–3 detail views per page, ghosted mode, showing 3D models) but it worked fine on my PC. On my Mac, most layout changes caused the spinning wheel of death. Duplicating a layout would make Rhino not respond for 5-10minutes, sometimes having to force quit. Changing the Rhino settings didn’t help. I did use claude for debugging this FYI. I ran a “sample” process from activity…
M
I have a huge 2d landscape plan, with 1000 hatches. abot 60 of them just won´t make it to dwg (AutoCad). whatever I tried, they keep being skipped. Rebuilding all of them is too time consuming. they are all on the same layer, but have different colours (that need to stay). All of them are solid hatches, so I really don´t get, what´s the issue here. Is it maybe connected to accuracy and units (tolerances) in the model? Anyone has an idea? Or a gh file to simply fix it? Any help would be much…
M
Hi @DavidRutten and the other Grasshopper devs, I just noticed that there’s a substantial lag when interacting with sliders in Grasshopper 1 in Rhino 9. It might be something I fucked up somewhere, but have a look at this side-by-side (Rhino 8 left, Rhino 9 right) and try the attached file and check for yourself, might just be me: 260918_LaggySliders_00.gh (13.9 KB) Rhino 8 SystemInfo (click for more details) Rhino 9 SystemInfo (click for more details) Best, Anders 5 posts - 4 participants Read…
M
There is one very confusing aspect of the “Align to control polygon” mode of Gumball. When I select a single control point which is visible, the mode works as expected. However, if the control point is obscured from the view ever so slightly, window-selecting it converts the Gumball orientation to “Align to Cplane” mode, despite that technically speaking it remains in “Align to control polygon” mode. The expectation is that when the user selects just one or a few control points (no other type…
M
This causes Rhino to slow so much it’s essentially non-functional: However, I tested it on a different machine, and it seems only a very specific width causes that glitch? sloooow.3dm (1.6 MB) 10 posts - 4 participants Read full topic
M
Hello Rhino, Since I have phased out my drafting to my staff, this issue seldom comes up with me, but seriously, this has been haunting me forever. Although, I like the elements of bringing in a PDF file & having Rhino Read it, is it too hard to implement a script or Macro to either trace the text, or actually bring it in as an object, why is it so buggy? Maybe I’m doing something wrong, but I’ve tried bringing the PDF in, in many ways, but it always gives me like a bastardized copy of the PDF…
M
I’m setting up a new machine with Rhino 8 and in the course of migrating settings over and noticed some odd discrepancies. (These aren’t major issues for me - I can regenerate the configs, but I’m noting these here in the hopes that it surfaces issues that may be of use to the Devs for migration mechanics improvement). Using the OptionsExport / OptionsImport tools from the command line - I created a .ini file and loaded it on the new machine, here’s what that looks like on each system -…
M
Hi, I’m using Rhino Version 8 SR35 with Bongo 3.0 WIP 21. When I try to render an animation of 150 frames at 30 FPS in Full HD (1920×1080), using either Viewport Display (in Monochrome or Pen display mode) or Rhino Render as the target render, the process freezes after frame 19 of 150. Is there a known fix for this? What is the problem? BTW, I experienced the same freezing issue with Bongo 2.0 as well. Thanks! 4 posts - 3 participants Read full topic
M
I would like to report this bug on mesh.IsPointInside(). I found other posts mentioning something similar, but they are all quite old and related to rhino 7 (I’m using rhino 8). To put it simple, mesh.IsPointInside() is returning false-positives; meaning that some points outside the mesh return True. I believe it’s a bug because if I use brep.IsPointInside() instead, it works as intended. I created this very simple script and rhino file attached to demonstrate this. If you run the script and…
M
Hello ! I’ve recently discovered that, while getting a mesh, created with displacement map, for the first time, the API sees the mesh as before its transformation. This also happens each time the assigned material is modified, e.g. one changes the matte value. I’ve prepared a minimal scene. The process is quite simple : create a planar mesh into Oxy plan add displacement on it run the script many times, it compares the extrema of the bounding box on Z axis change the matte value, then repeat…