XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

McNeel Forum - Latest topics

Latest topics

Oblong Tiling

I am struggling with the trigonometry that underlies the tiling of these oblongs: The circle centers are supposed to remain vertically aligned, and I believe horizontally aligned as a result aswell. But the math seems to change dependent on whether the oblongs touch on the round or the straight sides? 20 posts - 4 participants Read full topic

Do you know any way to flatten double-curved surfaces?

I want to flatten double-curved surfaces to create upholstery patterns for sewing chairs. However, I’ve tried the UnrollSrf, Squish, and Smash commands, but none of them have produced the results I’m looking for. I know about ExactFlat, but it seems to be quite expensive and requires a paid license. Does anyone know of an alternative method or a plugin that can flatten double-curved surfaces for upholstery patterns? 7 posts - 4 participants Read full topic

VisualARQ Tables – Worksession Reference Objects Not Included

I’m testing a BIM workflow with separate Rhino files for each floor, attached through Worksession. VisualARQ correctly uses referenced objects for sections and can read their BIM properties, including quantities. However, Tables seem to ignore these objects. I confirmed this by comparing an automatically updated table with one containing only ground-floor objects. Both returned identical quantities. Is this an intentional limitation of VisualARQ Tables, or a bug? Consolidated quantities across…

Gridfinity for Grasshopper: parametric baseplates, bins and lids

Hi everyone, I’d like to introduce Gridfinity for Grasshopper, a free plug-in for creating Gridfinity baseplates, bins and lids directly in Rhino. Core and modifier concept Core components define the basic shapes of baseplates, bins and lids. Modifier components add features such as dividers, scoops, magnet pockets or a stackable lip. Modifiers are simply stacked, and each one outputs the complete state of the part at that stage. Only the last component in the chain needs to be baked. A typical…

Help connecting a series of points across multiple objects

Hello, I’m new(ish) to grasshopper (it’s an on and off thing) and I’m trying to figure out how to connect a series of points across multiple objects, like the screenshot shows. The screenshot simplifies it down to one line across the horizontal circles, but ideally I want to divide the circles by X number of divisions and be able to connect all the 0 points, 1 points, 2 points, 3 points, 4 points… so on and so forth. Any help would be appreciated! LAMP 2.gh (8.1 KB) 3 posts - 2 participants…

New Book Illustrated in Rhino

My latest book, again illustrated using Rhino, is now available. The best place to get it is Lulu (best quality) but it is starting to appear on Amazon and similar. Lulu The Design of the Hull Shell of the Iowa-class Battleships The Design of the Hull Shell of the Iowa-Class Battleships is volume three in a continuing series of books devoted to the design and construction of these ships. The source material in for the book is original plans and measurements taken from the... Price: USD 80.00 3…

Rhino 9 on ARM (snapdragon X2 extreme)

Hi, Next year I need to travel a lot and I am thinking to buy a laptop with the ARM snapdragon x2 extreme. I will use rhino 90% of the time in combination with grasshopper and the rhino-mcp-platform plugin. Other plugins would be nice extra’s, but I could live without them if necessary on the laptop. Rendering is not important, as long as I can use shaded views on my laptop, I am happy already. If somebody is using Rhino 9 on an ARM laptop(snapdragon extreme X2) I have four questions: 1)Does…

Wait for Rhino 9 or purchase Rhino 8

As an architecture student I use Rhino almost daily for academic and personal projects. For the past four years my university provided licenses. However, the grad school I’m at now doesn’t. My 90 day free trial is coming to an end soon and I plan on buying a license. However, might it be better to wait for Rhino 9 to come out or should I just get Rhino 8? 5 posts - 5 participants Read full topic

TopMod 3D: magnetic field lines as geometry (pipes, handles, 2D/3D)

New in TopMod 3D: Field lines — magnetic field lines between poles, built as real geometry. Field lines run out of every north (+) pole and curve into the south (−) poles, like iron filings around magnets. You drag the poles around in the viewport and the lines re-trace live; drag a pole’s orange knob to change its strength, click it to flip N/S. 3D or 2D — lines in space, or flat in a plane (good for laser / plotter work) Pole layouts: scattered, bar magnet (dipole), quadrupole, ring of…

Plug-in issue

Hey guys, I’m running into this issue. I have attached a photo of what rhino is telling me. I have had issues with this plugin before and changed some settings, but have fully wiped rhino from my computer and reinstalled hoping that it would fix it but didn’t. Any advice would be greatly apricated! 4 posts - 2 participants Read full topic

Feature Request. Previous Visibility and Previous Locked State Button

Hi Again. Well. this would speed a lot my work. hope it make sense. While working.. I usually isolate many some things in the modelspace I am working.. and at some point maybe I need to isolate just one element.. I do it.. but “turning on” everything is not an option. and “turning on only some elements”.. is oook. but it requires selecting them again.. that may be time consuming. I know all the other options of using states.. named selections and all are great.. but for this very frequent…

Layers Keep Getting Resorted

I have been using the beta of Rhino 9 and most things work great. But I have a problem with the layers being resorted after I restart Rhino. I will get them in the order I like, but if I close Rhino and re-open it, they get sorted alphabetically. I don’t know if this is a bug or am I missing something. 6 posts - 3 participants Read full topic

Display setting + printing question

Hi everyone, I am trying to get rid of the diagonal lines that’s running through this polysurface when printing. It’s not a flat surface so some of the diagonal lines are clipped(?). A couple of questions– Is this is a display setting problem and if so–what settings do I need to adjust so that the lines can go away? I’ve adjusting the settings in the Rhino Display and the object property, but no luck Is this a modelling problem? Any advice on how to go about modelling this so that it could be…

Firefly 2.0 Now Available

Firefly 2.0 now available Firefly connects Grasshopper to the physical world. It reads sensors and controls motors, lights, and other hardware on Arduino and similar microcontroller boards, live, right on the canvas. Firefly 2.0 is a complete rewrite, and you can install it today from the Rhino Package Manager. Everything you relied on in the original Firefly is still here, and there is a lot that is new. It runs on Rhino 8 and Rhino 9, on both Windows and macOS. And it is built around a new…

[URGENT] Rhino 8 SR36 broke my plugin

After updating to Rhino SR36, my plugin AssembleRhino (it’s on the PackageManager) does not work anymore. When calling the command AssembleRhino, I get the following error message: Summary (click for more details) The same occurs if I run the uncompiled script from directly from the ScriptEditor The first line of the script is: // #! csharp But it does not matter much, since the errors persist even if I delete it. The error referring to the IPointer<> type appears on the InstalledFontCollection…

How to subtract a group of edges from an existing selection?

Hi everyone, I often work with sheet metal parts containing many holes. When I select multiple hole edges (using Ctrl + Shift) and want to remove/deselect a specific subset of those holes, I run into trouble: Using Ctrl + selection window (left-to-right or right-to-left) either does nothing or clears the entire selection because of the double edge / solid thickness geometry. Ctrl + Shift only adds to the selection, it doesn’t subtract. Is there a native way, macro, or workaround to cleanly…

RhinoAiMCP vs Rhino MCP Platform: did someone try both?

I’m starting to get into AI Rhino modeling. As a beginner in this new field - not with Rhino, that I use since 1998 - I would like to understand if there is a significant difference among these two plugins. In my studio someone still uses Rhino 7 which requires RhinoAiMCP - official Rhino MCP Platform is not compatible - so I’m evaluating if it’s still possible to keep those licenses or if - in case of big differences in AI managing from the official McNeel plugin to this commercial one - it’s…

RailRevolve is profiling and Scaling unexpectedly

I forgot solution for this… can someone explain why railrevolve logic breaks here? from start I actually baked those curves from grasshopper. then I simply do a railrevolve. so if the rail curve is somewhat wrong you do not get the expeted result, I know railrevolve works by scaling the profile but this is another thing IMO. curve seams are matching. using latest Rhino 8 for windows. thanks 2 posts - 2 participants Read full topic

How to model a smooth heart-shaped border with sharp points?

Hello, I am trying to model a small raised heart-shaped border for 3D printing in Rhino 8. It is about 30 × 35 × 6 mm. I want the surface to look soft, rounded and smooth, similar to a wax seal. However, the two V-shaped points shown by the arrows must remain sharp. The heart is also intentionally asymmetric, and its height and cross-section change around the border. My current model was created from multiple cross-sections and two Sweep2 surfaces. Visible ridges appear where the surfaces meet,…

Issues with anchors in Kangaroo

Hi, I am having issues with anchor points in Kangaroo, despite mapping them into the mesh vertices. The results look like this: I think its related to how i build the meshes, but I am not sure how to fix it. Any ideas? The file with internalized geometry: Tensile square2.gh (20.5 KB) 2 posts - 2 participants Read full topic

Notilus Mechs Update: Gears That Mesh and Move (Spur, Rack, Bevel, Ring)

Earlier this month’s update added slide joints, IK drag and a motion timeline to Notilus Mechs. This one adds gears: you draw them, place them in mesh, link them, and the mechanism solver turns them together. The model above is one gear train: a rack on a slide joint, a spur train, a bevel pair and a ring gear. One NmAnimate step turns the first shaft 360°, and every other gear follows through its gear constraint. NmGears: one window for every gear NmGears opens a window with four tabs: Spur,…

Title: Need downgrade link for Rhino 8 Mac (SR 8.4 or 8.5)

Hi McNeel Team, I am running a MacBook Pro with an Apple Silicon M5 Pro chip. My current build (8.36) is permanently stalling on the ScriptEditor initialisation progress bar. This environment issue is causing my Grasshopper Ladybug Tools components to crash the entire application instantly. I need to downgrade to an earlier service release (around Service Release 8.4 or 8.5) where the scripting environment functioned correctly on my machine. Could you please send me a private direct download…

R9 latest update can not print anymore

after latest update i can not print anymore to my designjet or laserjet i print and then nothing happends also no print pop up or screen for printers ,have to get back to R8 to print Rhino 9 SR0 2026-10-20 (Rhino 9 BETA, 9.0.26293.12303, Git hash:master @ 3225ee2553a4565e4ed5ef04ee64d6d334601ed4) License type: Commercial, build 2026-10-20 License details: Cloud Zoo Expires on: 2026-12-04 Windows 11 (10.0.26200 SR0.0) or greater (Physical RAM: 24GB) .NET 10.0.13 Computer platform: DESKTOP…

HiddenLineDrawing.Compute crashes Rhino 9 (access violation)

Hi, Rhino.Geometry.HiddenLineDrawing.Compute crashes Rhino 9 (hard crash, c0000005 access violation, no managed exception) when a clipping plane added with hiddenLineDrawingParameters.AddClippingPlane cuts through a particular Brep. The Brep is valid (IsValidWithLog returns true, 5 faces, closed), it is a swept guardrail top rail. Version: Rhino 9.0.26272.12303 (Windows 11, .NET 10). To reproduce: open the attached make2d_clipping_crash.3dm (inches, tolerance 0.01) and run the attached…

Accepting 'PostCustomMessage' causes Isolate to hide selected objects

Rhino 8.35.26251.13001, Windows. Reproduced in Safe Mode with only built-in McNeel plug-ins loaded Steps: Start a fresh Rhino instance with an empty document. Run the attached MinimalIsolate.py (2.2 KB) MinimalIsolate.py (click for more details) After the script finishes, type _Isolate. Expected: The selected point remains visible; the other point is hidden. Actual: The selected point is hidden; the other remains visible. The command trace shows Isolate → Hide, omitting Invert. The script…