M
@Paul48 What information are you starting with - photos, curves such as cross sections? Are you trying to model an existing aircraft? If so do you want to model it as built which may not be “Class A” surfaces? How close to the input data does you model need to be?
M
Very, very nice! But @yeeling will not be able to 3D print it with out volume
M
Hi Alberto, There are very few fonts with all the unicode characters! They take a lot of effort to create (Source Han Sans, for example, needed four type foundries, plus a co-ordinating designer and funding from Google, just for the Chinese, Japanese and Korean characters) and it wouldn’t be viable to make a single line font given the comparatively tiny demand. Especially as TrueType fonts don’t actually support single line fonts so you have to fiddle them to make them work. So could you get…
M
yeeling: I am curious if there is a way where I can create joints (on the grasshopper) to joint to a ring, something that I have cad for a example. Your intention is unclear. You want to create joints (of what kind?) to joint (join or joint?) to a ring (join or joint what to the ring?).
M
I’d like to ask about the brightness of the base color in a .usda file exported from Rhino 9. Version: Rhino 9 BETA (9.0.26293.12303, 2026/10/20) ■ Attached files CubeBaseColor.usda: Exported USD file gray_1024x1024.png: Texture used in M_PBR_Texture (pixel value R=G=B=118) rhino_viewport_materials.png: Rhino viewport and material settings usdview_screenshot.png: Display in usdview ■ Steps to reproduce I placed two MeshBoxes, X=1000, Y=2000, Z=3000 (mm), side by side and applied the following…
M
At first, I thought it was some sort of Korean doughnut, until I realized it was baked beans in a CD case. Lucky for you I am old enough to know what a CD is. I titled the thread “Oblong Tiling”. Now, I realize that the word I was reaching for is actually “obround”. Not that oblong is wrong, but this kind of shape is specifically an obround which is a subclass of oblongs. @seg Is this image: seg: supposed to be telling me that your script will work with the full 360 degrees? When I attempt to…
M
can you post a file to try and reproduce?
M
yes there is far too much to be considered and details for these automated tools to do it. the only way forward for these tools is for everyone to give up any expectation of specificity. as long as you dont have any specific opinions about details or combinations of details, and you are happy that there is no individual or organisation that will take responsibility for the correct choices having been made then a.i. will be the choice but thats already the same choice that ‘takes’ low effort /…
M
Thanks Jim, that’s a great help. The MatchSrf approach looks like a good simple solution for joining the fairing to the rear fuselage section. The remaining challenge is getting the shoulder to gradually fade away into the fuselage. I’ve highlighted the area in the Zebra analysis where the reflections bunch up and change direction. Do you have any suggestions as to how could I achieve a smoother transition here while retaining the defined shoulder further forward? Thanks, Paul
M
Can you post a file with steps to try and reproduce this?
M
Hey Jennifer, you can dupedge and get a curve from the edge of your polysurface. Then offset it by the amount you need to make it wider (2.5mm) Then offset that curve inwards the amount you need for thickness of the rim. (or copy the existing curve that make up your existing rim) then make a planar surface from those two curves and extrude it into the new rim. then boolean it into your existing object. if you share your file, I’ll be happy to demo this.
M
the very short answer that I’ve been using lately is draw up cad in rhino ready for manufacture and at correct scale to have use and meaning in reality, then just dump screen grabs of basic layouts into ChatGPT. its sloppy but it’s fast and better than anything I’ve manged to get from rhino as direct render work. 2 examples below..>
M
Some trials confirmed OpenCode interface is faster than VS Code when interacting with Rhino, whether it’s carrying none, low, medium or high reasoning. On several attempts in modeling the bracket, with some changes in prompt, the results is always the same. However, reasoning setting on default, medium or high is required to get the shape and accuracy done correctly. I may try to let it observe 3d object and then ask it to do layout drawing later Oh, one more thing. While the AI is in the…
M
Hi, @badileanu. Thank you for your well-documented request. I’ve added this to the original YouTrack issue you mentioned. You can follow along there, if there’s any progress. YouTrack Chained dimension type : RH-38900 https://discourse.mcneel.com/t/continued-or-chain-dimension/42367/4 I guess this is probably a wish list item at this point - The request is to have a dimension type that is a chained dimension - that is a single dimension that has multiple chained...
M
Another Flow difficulty. Here are two Flows. Upper one succeeded, but the lower one did not. The dot shows where the stent ring failed to connect. The lower image is more elaborate, an extrusion, but the reference line used for Flow is identical in length. The target circle is 5.08 mm in diameter. The circumference is 15.959. Wondering if the use of surfaces requires a different command. 3dm attached. Thank you for your insights. Michael sqr underway11-2-26.3dm (2.3 MB)
M
_tweenCurves to get a center curve _move option vertical for the canyons depth _loft to build the surfaces
M
Hello there, is there a way to edit a custom profile to set the insertion point when placing the beam using VisualArq? I’ve created several profiles for cornices running along a roof edge, but when prompted the insertion point is in an awkward place along the profile line. I want to change that so the insertion point is on a corner in a logical place. Would I need to re-create the profile from scratch? How would I specify the control point or insertion point location? Many thanks as always.
M
I don’t know if this solution will work but I would put a small cylinder on top.
M
@andy: Could we also please get a zoom-in/zoom-out with scroll-wheel + pan in a standard Rhino-style without the horizontal and vertical scrollbars?
M
Thanks Dale, for some reason this doesn’t work for me – but I think it used to; just as you describe. Is there a setting somewhere that would lock these, that I may have checked by mistake?
M
MOdel Test 2.3dm (9.3 MB) Here is a simpler file that I started from scratch where I’m getting the same behavior. Concrete blocks are a vray material, grid is rhino. Scale seems to work once, but not again. Rotation does not work.
M
When I said it was working, I only meant it loaded the plugin without error. I’ve actually tried loaded a couple of different images now but can’t get them to appear in the viewport. It reads the image and sets up axes. If I click ‘show all detected edges’ I can see 200+ lines but still no loaded image. I should probably read the manual at this point.
M
Hi guyes, I just got this alert, do know what is wrong? I am afraid that this script is not working anymore. 1. Solution exception:The type initializer for ‘OSGeo.OSR.OsrPINVOKE’ threw an exception.
M
That would be very useful - somewhat analogous to the Cumulative option in BoundingBox. A name such as Together might be better to eliminate the possibility of users thinking the Group option creates a group which is retained.
M
Hi Brian, Yes - here is a simplified version of the model I’m working with: link The brick material I was showing was from vray. I know the latest release is not optimized for Rhino 9 yet, so it’s possible there is an issue there. However I tried adding a generic rhino material (the grid above) and I’m still getting strange behavior. If it’s clear in the video above, it’s just seems…weird? The scale worked once or twice, but then wouldn’t, the gumball randomly deselects, scale 1d did not work…
M
Tom_P: your special case looks like a sub-category of special cases: There are an infinite number of special cases. But there are also an infinite number of sets of three curves which are tangent to a sphere but not tangent to a circle. And there are an infinite number of sets of curves for which there is not a tangent circle or sphere.
M
Hi @LeGaulois, A perspective view is centered on the camera’s line of sight. Resizing a perspective detail’s border on one side moves that center, so Rhino has to change the view to fit the new border: - In Rhino 8, the image is scaled to fill the new border. - In Rhino 9, the scale is kept and the view is re-centered by moving the camera sideways. Objects at the camera target’s distance stay where they are on the page, but objects nearer or farther shift a little. (RH-88920) Locking the detail…
M
back to spaghetti monster…sooo disapponting
M
great - thanks David for chiming in… David Cockey: Special case your special case looks like a sub-category of special cases: the tangent points are knots and curvature is in the circle’s plane. … there is more freedom: … rotating the green curve around the tangent point / axis: … or more… circle_tangent_3d Special Case DC_and_tom_p.3dm (3.0 MB) kind regards - tom