M
I know it’s not a lot of details, sorry, I haven’t figured out the common factor in this issue. It was getting particularly bad this morning, I was continually closing and re-opening the same file and losing access to layouts, I restarted Rhino and my computer and it’s been less frequent since. I always have monitors connected, I don’t disconnect them, it’s a desktop. No connection to sleep wake or resolution. it will literally happen in the middle of editing a file. I thought it was connected…
M
Rhino 3D to Solid Edge: block-aware parts and assemblies Hi everyone — I wanted to share a Rhino-to-Solid Edge workflow I have been building for projects that use nested and repeated Rhino blocks. I started working on it after running into frustrating results when moving some of my Rhino assemblies into Solid Edge. In one earlier import attempt, a subassembly was reported as 24 sheet bodies and 0 solid bodies, alongside Parasolid B-rep creation errors. I also wanted a better way to preserve…
M
@AndersDeleuran Is it possible you’ve got some setting that’s been modified in your setup (note the white canvas background)? I just ran the latest stock Rhino 9 build and then tested the menus against the title bar, etc and the results all matched exactly.
M
Anyone notice this lately? You MatchSrf and then you want to tweak some control points… and you’re able to move them completely freely, in ways that break continuity… yet, when you do SelHistory, they still highlight as being matched. I’ve done factory resets on both V8 and V9 recently, and I see this behavior in both versions… I hope it’s not some weird default that allows this? I’ve also already reported this to McNeel support, but I’m seeing this so frequently now that I had to ask the forum…
M
I’m experiencing an issue in Rhino 8 where text background masks do not work when printing to PDF using Vector Output, but they work correctly when using Raster Output. This is particularly problematic for my architectural plans/elevations/etc drawings, where text annotations need to mask underlying linework to remain legible. Unfortunately, switching to Raster Output isn’t a practical solution, as my colleagues need vector PDFs… Is there a solution to this without going full raster? Thank you.
M
Hello @fsalla , I’m sorry for the late reply. It works now with recent visualarq updates. It may have been a problem with my file. Thanks!
M
Hi @Nikki4, Not much to go on. Does it seem to happen after the displays sleep/wake, or when a monitor is connected, disconnected or changes resolution? Is the Layouts panel docked or floating? If you close it and open it again (without closing the file), do the layouts come back? Do you have more than one file open when it happens? While the panel is empty, can you still switch layouts with the Layout command or the viewport tabs? Anything you usually do just before it happens (Print, PDF…
M
Is it possible to use custom PNG images as clickable buttons for multiple Set Parameter Values Actions? I’m using the Set Parameter Values Action in ShapeDiver to update multiple parameters at once. Instead of displaying standard buttons with text labels or icons, I’d like to use my own PNG images, each representing a different shape. Ideally, I’d like to arrange multiple Action Controls in a visual selection menu (similar to an image grid or dropdown), where users can click on a specific image…
M
Hi @Russell_Emerine, Glad it works. I’ll get the BrepFace.Split documentation updated. IsoCurve or TrimAwareIsoCurve? Either works. The split only uses the part of the curve that lies on the face, so the untrimmed IsoCurve is fine. TrimAwareIsoCurve returns just the pieces inside the trim, which is what the SplitFace command uses. Face indices. Unchanged faces keep their indices. The original index isn’t left empty: one of the split pieces stays at the original index, and any other pieces are…
M
This works! The documentation for BrepFace.Split says “Returns: A brep consisting of all the split fragments, or null on failure.” So, I was expecting the result to have just the split fragments corresponding to the original face and not the rest of the brep that the face was part of. I’d appreciate it if you’d reword the documentation to make that clear. I have a couple of follow-up questions: I expect you should always use IsoCurve instead of TrimAwareIsoCurves for this. Is that correct? Do…
M
Hi @Russell_Emerine, You’re right, the profile has no real kinks. Extrusion.ToBrep splits wherever the curvature breaks, not only at kinks. It’s the same as running ExtrudeCrv with SplitAtTangents=Yes, which is why the Gumball extrusion comes out the same way. Your profile has three of these breaks: the two places where the lines join the curve. The joins are tangent, but the curvature jumps from flat to curved. one spot in the middle of the curve (around z=54.8) where the curvature suddenly…
M
@oborgstrom , PS This Daylighting Technical Report - 5.9-5.12 Daylighting - Cyclops Documentation Is incredible.
M
Dear Oscar @oborgstrom , Is there any possibility I can send you a Rhino 8 and grasshopper file. Everything is light and not too big of a file rather small. Would you mind so that way I can make sure the settings are correct? I am rather new working with Cyclops - I did see your UDI and other topics before reaching out. Best regards, Andres My email is dd5914949@gmail.com
M
Hi Osher, Revit 2025.3 and beyond ships with a plugin manager. in previous versions you can use this.. rhino3d.com Search for Conflicting Plugins - Rhino.Inside®.Revit This guide provides ways to troubleshoot and collect information about Rhino.Inside.Revit errors. Please see Known Issues & Bugs for a list of known issues. A quick test you can do is this.. Help Us Help You - Rhino.Inside.Revit Edition Revit 3. Additional Troubleshooting Methods You can Cntl+Shift on the Rhino start button on…
M
Hi! I’m having the same uninstall issue with Rhino.Inside.Revit. My installed version is 1.35.9698.15636. When I try to uninstall, Windows displays the error: “The specified account already exists.” I understand that I need the matching installer to run a Repair. Could someone please provide the MSI installer for this exact version? I’m using Rhino 8.37 and Revit 2027. Thank you!
M
Hi everyone, I’m Alex, a furniture design engineer from Romania. I design cabinets in Rhino and send them to CNC shops, so most of my day used to go into the same steps: placing hinges, working out the drilling from the data sheets, building the parts list by hand. Over time I turned those steps into Python commands. They are now a Rhino 8 package with two toolbars, called Sphericon Furniture, and I’d like to hear what other people who build furniture in Rhino think of it. What it does, all…
M
I’ve found the geometry from the old issue. I remembered the problem wrong. It wasn’t a surface-surface intersection that failed, it was brep-curve intersection like the original post, or rather a failure to split a brep with some curves: The shape on the left is the output from Extrusion.Create, and splitting it with the curves fails. Intersecting the brep and the curves works fine but has some extra points, and I’m not sure how that affects splitting. The shape on the right is the output from…
M
Hi @Holo, I’ve logged your request. YouTrack Rhino to GLB does not support instancing : RH-100388 https://discourse.mcneel.com/t/rhino-to-glb-does-not-support-instancing-please-support-this/224695 – Dale
M
Hi Haris I just updated it to 8.37 and it fixed it. I didn’t think of that before sorry for inconvenience. Thanks for all your help and looking forward for seeing more
M
Added some features to the render engine like background HDRI blur + background images. And a full set of image controls like contrast, shadows, temperature, vignetting etc etc. It now also has curve piping, thickness and edge softening (as a shader) I also spent a lot of time adding color depth to transparency and subsurface scattering. (Very niche, but it’s integrated in a very easy to use manner) What do you think? What’s the worst with this image? What should be improved render engine wise?
M
Hi Paul, That’s a limitation rather than a bug. The Grasshopper component makes a regular block from the drawing, it isn’t registered with Section Tools like a drawing made by the ClippingDrawings command, so UpdateClippingDrawings and the clipped drawing editor don’t see it. The update happens on the Grasshopper side instead, set the component’s Update input to True (or use its Update button) and the drawing is rebuilt whenever the definition recomputes from your model changes. @AndyPayne will…
M
Hi I’ve been testing out the new Create Clipping Drawing components in Rhino 9 Grasshopper. However, I noticed that the drawing output doesn’t behave the same between Rhino and Grasshopper. If created manually in Rhino, the drawing is created as a block which, when double-clicked, opens the Edit Clipped Drawings window for changes/updates. However, when the drawing is created from Grasshopper, it creates a ‘static’ block. Updating the Rhino model doesn’t update the section even if ‘Update…
M
yes both the images u posted in ur original post are outputs (there is a cable coming in on the left) u only now turned it into an input in this image u dont need to use the model object component maybe thats buggy. Just use a data component or brep component to set and internalize the geometry. Can you show us what is the model object geometry you are trying to internalize thats coming from rhino?
M
EmmisiveBug.3dm (1.9 MB) Here’s a sample file. 100x emissive circles, over a 0 ground plane.
M
It seems like emissive materials don’t always produce the same brightness, depending on how many are in a scene. For example, here’s a simple array of 100 bollards, with a emissive material under the cap to simulate the light. That would be the yellow selected line in this side view: Here’s what a a simple render of the scene looks like with all the bollards in place: And if I change NOTHING, just DELETE most of the bollards, the remaining ones get a lot brighter: This is with no changes…
M
There won’t be any additional features added to Rhino 8, critical and minor fixes only. No SDK changes..
M
Hi @Haris_Papadopoulos, The fix is in the SR2 Release Candidate. – Dale
M
I will but I’m thinking backward compatiability.