M
I think I want to create connections. I am after a more graphically clean and technically oversimplified solution, actual detailing is not relevant for now. Thanks for your help! Project1.rvt (1.3 MB) unnamed - Copy.gh (33.0 KB)
M
My RHino 8 doesn’t have my Rhino7 Va View modes. Do I have to export all 30 of them as individual .in files (I can see how to do that) or can I somehow transfer them all at once?
M
Hi again Dale, It’s strange, I cant seem to reproduce the issue now. Maybe it was a printer problem that somehow ignored the backgrounds on vector drawings, but I just saved a rhino pdf as vector, and the masked backgrounds printed fine. Ill report back here if I happen upon the problem again and see the issue specifically in a PDF.
M
Thanks for making the ticket and noting the documentation change. I added the SplitKinkyFaces line to my code and now I’m facing a different issue where I make an extrusion surface, SplitKinkyFaces turns it into a brep with two faces, and the Brep.Split call afterwards successfully splits the faces but also splits along the internal edge, making four pieces instead of the expected two. This is despite the splitting curves only crossing the internal edge at one point. When I remove the…
M
Sorry Mary. Appears I cant recreate the problem now. It fixed itself or maybe it was the printer?
M
Do you want to create connections or remove Connections? Can you also share the sample file?
M
Can anybody suggest a quick and easy method for cleaning up these steel beam connections? Elements are I am not super familiar with steel workflows but wondering if there is a way to use RiR to get everything slightly more refined. The structure shown is created from a reference mesh. thanks for any help!
M
Oh sorry Dale. I thought you just needed the file. Ill add an example and re-upload. Im at work and in middle of a drawing release…will get this uploaded in a bit
M
@PeterB, I think we need a different file. This is what we see when we open it in Rhino 8. We assume that there will be text with a mask that we will test printing with. Thanks for your help. Sincerely, Mary Ann Fugier
M
Uploaded a new file to McNeel now.
M
Holy crap, you don’t waste a minute, do you? That’s just excellent, @BrianJ And let me just echo what @René_Corella wrote in regards to how much more accessible this tool is over having to muck about in GH. GH can do incredible things, but for many use cases, including (but not limited to) quick viz and sketching, this is great! Regards, Jakob
M
Well, I tried to replicate what I just experienced on my surfaces and after extracting and untrimming, I wasn’t able to. At least I have this video I sent to support earlier to prove I wasn’t delusional: But it seems that after a sew and explode the behavior can correct itself…
M
Hi @eobet, Being able to drag control points on a surface matched with History is intended. The matched surface is also one of the history inputs, so editing its points makes the match replay rather than breaking history. That’s why SelHistory still finds it. When you release the points, the rows that control the match should go back to meeting the target. @davidcockey is right - MatchSrf with AverageSurfaces=Yes doesn’t record history, so after that kind of match both surfaces can be edited…
M
Sorry for the late reply @Kuki, I would Uninstall the plugin via the packagemanger command Restart Rhino Run PlugInManager What plugins are listed under “Plug-in’s NOT shipped with Rhino”? I’m also curious if you ever cloned the source code and installed the plugin from there maybe?
M
Hi @PeterB, I’m not seeing anything in your file to print. What am I missing? – Dale
M
Hi @theoutside, thank you so much for the kind words and encouragement! Coming from you, that truly means a lot to me. Since this project focuses primarily on the exterior surfacing, I will polish up a few clean studio renderings of the body lines (along with some chassis details) and start a dedicated new thread within a week. Really appreciate the support!
M
Thank you @BrianJ !! I bet you know how valuable this is for very specific/creative pattern creation within Rhino and without GH for those who need it. Thank you for taking the time to add this.
M
Working on the Wood insert nuts. Tricky builder for this type of nut. Give me a few days to figure this out and I will post an update. I got the head fix in place.
M
@Normand & @René_Corella , Depth by member height and image based attraction are now live with v1.2.0 of Crowd Control. Enjoy!
M
History suport for MatchSrf was announced in 2015 for Rhino 6 WIP (bolding added) MatchSrf history In last night’s WIP, there is the start of history support for MatchSrf. So far, it doesn’t work with Average matches. I’m not sure yet when or if that will be supported. My guess is the Parent-Child structure used by History makes enabling History for MatchSrf with Average surfaces very difficult or impossible. Each surface would need to be both a parent and a child of the other surface.
M
can you post a file with steps to repeat? I’d like to dig into this a bit.
M
I tried every possible setting in Windows 10, but the problem is that the command repeats by itself when the keyboard key or mouse button set to use a key function is held for a longer period of time. Also, the Windows 10 settings don’t affect my Logitech G502 Proteus spectrum mouse’s buttons. This is why I ask again for a future update of Rhino to disable the repetitive behaviour of the _PointsOn command when the surface is pre-selected and then the F10 key (or, in my case, the mouse button…
M
What I see in V9 with two simple surfaces using MatchSrf with History On It appears that MatchSrf with “Average surfaces” OFF is History enabled. It appears that MatchSr with “Average surfaces” ON is not History enabled. MatchSrf with “Average surfaces” OFF SelObjectsWithHistory selects the surface to change. Move a control point of the surface to match. Surface to change alters as/if needed to maintain the match. Move a control point of the surface to change. If that control point affects the…
M
thanks for pointing this out- RH-100391 add custom color and display to radiate
M
Hi Dale, Attached. Thanks. Rhino 8 SR35 2026-9-8 (Rhino 8, 8.35.26251.13001, Git hash:master @ 3645d710f50175d8ebcf404aded5b042a481c23e) License type: Commercial, build 2026-09-08 License details: Cloud Zoo Windows 11 (10.0.22631 SR0.0) or greater (Physical RAM: 64GB) .NET 8.0.14 Computer platform: DESKTOP Standard graphics configuration. Primary display and OpenGL: NVIDIA GeForce RTX 4070 Ti SUPER (NVidia) Memory: 16GB, Driver date: 7-22-2026 (M-D-Y). OpenGL Ver: 4.6.0 NVIDIA 610.88…
M
Text and leaders already support automatic wrapping to a width. Select the text, turn on its control points (PointsOn, or F10), and drag the grip on the right side of the text. Dragging it narrower than the text wraps it to that width; dragging it past the end of the text removes the wrapping. – Dale
M
is request this for the text command or for annotations?
M
Hi @PeterB, We need two things: The output of Rhino’s SystemInfo command. A .3dm file that we can use to repeat the problem. Include any instructions if necessary. Thanks, – Dale
M
Hello Alina Thanks for updating me. I thought I made a mistake on the last version and accidentally made it work only for Rhino 9. Good to know it is functioning properly. I am open to further suggestions and thanks again for trying my plugin. Haris