XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

Homey Community Forum - Latest topics

Latest topics

[APP][Pro] Værmeldingen – The complete weather app for Norway

Værmeldingen (“the weather forecast” in Norwegian) is a complete weather app for Norway. One device gives you the forecast from several weather models, radar nowcast, new snow and snow depth, MET weather warnings, MET’s own text forecast and, if you like, the readings from your own weather station. The forecast works anywhere, but the app is made first and foremost for Norway. Install the test version of Værmeldingen Why I made it I used the Værvarsel (Yr) app, but some of its flow card…

[APP][Pro] Floor Plan Dashboard – your home as a live floor plan in 2D and 3D (test version)

Nederlandse versie: Plattegrond Dashboard Hi all, After Energy Dashboard I made a second dashboard: Floor Plan Dashboard. Your home as a live floor plan, with the devices where they really are. Lamps glow where they hang, rooms show their temperature, and next to each device is the value that matters. I am looking for people who would like to try the first test version; you can install it from Floor Plan Dashboard | Homey You can have a look first without installing anything, in the demo with a…

[APP][Pro] Plattegrond Dashboard – je huis als live plattegrond in 2D en 3D (testversie)

English version: Floor Plan Dashboard Hallo allemaal, Na Energie Dashboard heb ik een tweede dashboard gemaakt: Plattegrond Dashboard. Je huis als live plattegrond, met de apparaten op de plek waar ze echt zitten. Lampen gloeien waar ze hangen, kamers tonen hun temperatuur, en naast elk apparaat staat de waarde die ertoe doet. Ik zoek mensen die de eerste testversie willen proberen; die installeer je via Floor Plan Dashboard | Homey Eerst even kijken kan zonder installeren, in de demo met een…

# Homey Showcase: A Self-Driving Home Energy System

TL;DR: Homey Pro now runs my heat pump, home battery and EV charging on dynamic hourly prices and a solar forecast, through about 30 numbered Advanced Flows. In the first 10 days of hourly logging (19–28 October), 98% of my solar production was used at home, the heat pump heated at an average COP of 5.7, and after reimbursements my net electricity cost came out slightly below zero. This post covers the goal, the design choices, how it is built, what I learned and the measured results. Questions…

Magister via Homeassistant

Goedemiddag! Zijn er hier gebruikers van Magister via Home assistant? Ik heb de koppeling gemaakt in HA en via de Homeassistant Community app nu een hele bups apparaten aangemaakt. Maar nu… Deze apparaten geven geen waarden die ik verwacht. Heeft iemand dit al werkend en kan die wat screenshots delen? Bedankt! 1 post - 1 participant Read full topic

NewnTide heatpump, Eco-Home app integration?

Hi, I have an electric heatpump from NewnTide that can be operated via the “Eco-Home” app. I would like to have the ability to operate this system via Homey, for instance switching on the boiler heating when I have a surplus of solar energy or when electricity costs are low. I did notice that Home Assistant has an Eco-home API, but haven’t been able to find a solution for the Homey Pro. Is there someone who managed to do so or who can advise me? Thanks a lot for your help! Paul 2 posts - 2…

[APP][Pro] Sonnounce (NL) — send spoken announcements to your Sonos speakers

Picture this: whenever dinner is ready, or you are simply feeling lazy and cannot be bothered to get up, you could reach the others in the household. Then I might have the solution for you. I have made an app called Sonnounce. It works on iPhone, Apple Watch and Mac, and it is fully available in Dutch. You can send messages to all of your speakers or to individual ones. The app finds the speakers on your wifi by itself. No extra account is needed, and everything you send stays on your own…

[APP][Pro] Parcel Tracker: every parcel from 132 carriers, without carrier accounts

Parcel Tracker follows the parcels you are waiting for, from carriers across Europe, North America and Oceania. You don’t log in anywhere: a tracking number is enough, and for some carriers the postcode. The app recognises the carrier itself, checks more often as the delivery gets closer, and tells your Homey when the courier is on the way, when a parcel waits at a pickup point and when it has arrived. Free, no account, and your parcels stay on your Homey. The only thing that leaves it is the…

[APP][Pro] DREO (Community): Dreo fans, heaters, air purifiers, humidifiers and air conditioners in Homey

[APP][Pro] DREO (Community): Dreo fans, heaters, air purifiers, humidifiers and air conditioners in Homey DREO (Community) puts your Dreo devices in Homey: switch them on and off, pick the mode and speed, set the temperature or humidity, and use all of it in Flows and on your dashboard. It logs in with your Dreo account, the same way the Dreo app on your phone does, and what you change in the Dreo app or on the device shows up in Homey straight away. Dreo has an official Homey app as well, but…

Homey Energy Dongle -> flow

Beste allemaal, Gezocht op onderwerp, maar niet gevonden. Het lijkt mij dat iemand deze vraag al eens heeft gehad. Is het mogelijk om de Homey Energy Dongle te gebruiken in flows? Ik zou graag willen dat zodra de export van stroom begint dat mijn batterijen beginnen met opladen. Op dit moment heb ik de actuele hoeveelheid geproduceerde zonnestroom als leidraad, maar dit kan slimmer, want op sommige momenten wordt de zonnestroom volledig gebruikt. 3 posts - 2 participants Read full topic

ChatGPT Homey integration - “Too many requests” rate limit

Hi everyone, I’m using a Homey Pro (2026) connected to ChatGPT through the official Homey integration. I regularly use ChatGPT to inspect, create and modify my Homey Flows and Advanced Flows. Unfortunately, I keep running into the error “Too many requests”, which makes the integration quite frustrating to use. Today, for example: ChatGPT attempted to access a single Advanced Flow and immediately received the error. After waiting, we tried again with just one request, but received the same…

Presence (home/away/awake/sleep) buttons in the app not working

Presence (home/away/awake/sleep) buttons in the app not working. Bug or user issue? Any suggestions? The buttons won’t work since a couple of days. I have reinstalled the app, checked location permissions (android) and the app has home/away detection on. The rest of the app seems to work just fine. And my partner with an iPhone doesn’t have any problems. Android 17 Homey Pro 2023 and 2026 In advance many thanks 2 posts - 2 participants Read full topic

"wachten of uitstellen" probleem

Hallo, ik zoek een separate flow optie voor “wachten” of “vertraging”. ik kan deze bij lampen bijvoorbeeld wel vinden, dus als in lamp X uit met vertraging van 20 seconden. Maar ik wil nu volgende instellen en dat lukt mij niet: ( regel met is het probleem, geen idee hoe ik deze in moet stellen separaat. Wie kan mij helpen??? Flow 1 — Start route carport ALS Camera carport → Een persoon is gedetecteerd EN Tijd ligt in de actieve periode: 16:30–08:00. DAN Zet Route gestart op Ja. Wacht 15…

Alle Ikea Komponenten ohne Funktion

Hallo Zusammen Ich bin neu in diesem Forum da ich vor ca. 4 Monaten einen Homey gekauft habe. Bisher war ich super zufrieden. Seit gestern Abend habe ich ein grosses Problem. Alle Ikea Birnen haben auf einen Schlag den Geist aufgegeben. In Homey steht „keine Antwort“. Die Ikea Bewegungsmelder fallen ebenfalls immer wieder aus. Alles andere funktioniert einwandfrei. Ich habe alle Birnen vom Strom genommen. Danach zeigt es sie in Homey normal an, schalten jedoch nicht ein und nach ein paar…

Lebe wohl mein Homey..lang lebe Home Assistant

Lieber Homey, es ist Zeit, Abschied zu nehmen. Du hast deinen Job gemacht, aber ich ziehe um: zu Home Assistant. Und der Umzug war viel leichter als gedacht. Er hat sogar Spaß gemacht. Das liegt am MCP. Home Assistant spricht direkt mit Claude, und dadurch war alles nur einen Satz entfernt. Gerät einbinden, Automation bauen, Dashboard umstellen: sagen, und es ist erledigt. Das Shelly-Display, das nie richtig funktioniert hat, ist durch ein ESP32-P4-Display ersetzt worden, umgesetzt mit ein paar…

[APP][PRO] Philips Avent Baby Monitor

homey.app Philips Avent Baby Monitor | Homey Peace of mind while your little one sleeps Test version: Philips Avent Baby Monitor | Homey Hi everyone, We have two Philips Avent baby monitors and I wanted to use them in my flows, but there was no Homey app for them. So I made one. It gives you the temperature, the motion and sound alarms, the night light and the lullabies in Homey, and you can watch the camera from the Homey app too. Supported monitors The connected monitors you set up with the…

[APP][Pro] Zendure LAN - Zendure LAN - no internet needed!

Connect your Zendure home battery and P1 meter to Homey and keep track of your Zendure’s status without opening the Zendure app. The app retrieves live information via LAN and not via internet, making your battery data available directly in Homey, without the need for internet ! Use the app to optimize your energy storage and creating smart Homey automations that respond to your Zendure’s state, helping you get the most from your stored energy. Key features: No internet needed ! Display state…

[APP][Pro][TEST] Dimplex ITC - Control your Dimplex E-Matrix fireplace

Hi everyone! I’ve been working on a community-developed Dimplex e-MatriX app for Homey Pro, bringing local control of compatible Dimplex electric fireplaces to Homey. The app supports both LAN and Bluetooth Low Energy (BLE) connections. The integration is based on the communication protocols used by the official Dimplex e-MatriX application and builds on experience from the Faber ITC Homey integration. The first test release is now ready, and I’m looking for Dimplex owners who would like to…

I built a web dashboard on iPad

I took @staeff concept design and rebuilt it using Claude for iPad which includes a screensaver like the Apple Homeview clock. I wrote a blog post about it and included a detailed guide including Claude prompts if you would like to recreate it. Simple PC – 27 Oct 26 Borrowing Apple's Clock: HomeView on My Own Wall So Apple has finally done it. After years of rumours, and years of me saying "surely this year?", the HomeView was announced on the 13th of October, and it's exactly what a lot of us…

Alfen Pro NG9xx via Modbus

Alfen Pro NG9xx Control and monitor your Alfen Pro-line (NG9xx) EV charging station from Homey over your local network using Modbus TCP. No cloud, no back-office in between, and a charging current that stays within what your main connection can safely deliver. Alfen Pro NG9xx | Homey What it does Monitor: voltage and current per phase, charging power, total energy, energy of the current session, and a readable status like the one on the charger’s own display. Control: set the maximum charging…

Feature request: Presence trigger flow cards with duration

It would be great if the presence trigger flow cards got some variants that took duration into account. For instance… “First person came home and stayed home for X seconds/minutes” Use case: My wife works close by our home and will often pass it while at work. Some flows don’t actually need to run when she is only “home” for 2 minutes. Also many flows are standard flows, that I don’t want to be advanced flows, even if I could solve it by using those. 5 posts - 3 participants Read full topic

Feature request: heat pump as a featured device in the Energy tab

Summary: The top of the Energy tab shows the main meter, solar panels, home battery and EV charger as featured devices. For many homes (especially in NL with hybrid heat pumps such as Quatt), the heat pump is one of the largest consumers — often bigger than the EV charger in winter. Today it only appears somewhere in the regular device list. Request Add a featured energy role for devices with class heatpump (or virtualClass: heatpump), alongside cumulative, generator, homeBattery and evCharger.…

Will Homey survive AI Craft?

Will Homey survive the AI Craft era? Have you seen what is currently happening with Adobe, Microsoft and even CAD software? A whole series of open-source applications has appeared under names such as PhotoCraft, WordCraft, GridCraft, DeckCraft and SolidCraft. These projects describe themselves as clean-room reimplementations: no original source code was copied, no servers were hacked and the applications were rebuilt from scratch, largely in Rust, with heavy assistance from AI coding agents…

Aktiver Kühlergehäuse Homey Pro 2023/26

Kühler für Homey Pro 2023/26 Auch wenn es gerade etwas kälter wird wollte ich meinen homey eine bessere Kühlung spendieren. Ich habe ein Gehäuse konstruiert und gedruckt (in PETG) und einen Lüfter 60x15 im Gehäuse untergebracht. Mein erster Versuch komplett schwarzes PETG zeigte aber Probleme mit Infrarot, die IR LED sitzt auf der Antennen Platine und da schien das schwarze Gehäuse alles IR abzuschirmen Im 2. Versuch habe ich einen Teil in transparent gedruckt jetzt geht Infrarot, aber etwas…

Everything slower since Homey Pro 2023 v13.0 upgrade

Hi all, Since upgrading to v13.0 a few weeks ago, my Homey Pro (Early 2023) feels slower: 1. Local backups (Homey USB Tool, recovery mode, USB-C to Mac) used to take about a couple of min before the upgrade. Now they take more than an hour. For comparison, a firmware update through the same tool takes only ~8 min. 2. The web app (my.homey.app) and the iOS app respond more slowly than before (opening the Devices tab, loading flows, toggling a device). Nothing else changed on my side (same…