Duty power cycling a heater
That flow is working for me, though it is better if you set the trigger time lower (that controls how often it sends an output). Set it to 5 seconds for example.
Rise in AI generate replies
It might have been 8.5, but I will stick with my story to save losing face! I will stay with just being a Bufoon.
Rise in AI generate replies
Where did you find PHP version 9.5 or was that a typo for PHP 8.5 ?
Duty power cycling a heater
I set it to 60 sec cycle - and fed in 0.25 but it seems to just output a 0 every 10 secs [{"id":"c9dfe61d15540484","type":"debug","z":"c8105042f10dd02a","name":"debug 97","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"false","statusVal":"","statusType":"auto","x":412,"y":628,"wires":[]},{"id":"b1494f62db28c009","type":"timeprop","z":"c8105042f10dd02a","name":"","cycleTime":"60","deadTime":0,"triggerPeriod":10,"invert":false,"x"…

Duty power cycling a heater
Have a look at my node-red-contrib-timeprop. You can set a cycle time and feed in via messages the current duty cycle required. So for example, if you specified a 60 second cycle time and fed in 0.25 then it would be on for 15 seconds and off for 45. If you are using this to control the temperature then you might also like to have a look at node-red-contrib-pid which will do the closed loop control for you. The output from the PID node can be fed directly into the timeprop node.
Duty power cycling a heater
I dont have zigbee so I'm no use to you I use Tasmota partly because it has a web console so I can fiddle with it outside of NR and MQTT. And I like the pulsetime approach because it avoids the plug missing a turn off command due to network issues. No chance of boiling the aquarium.

Duty power cycling a heater
No - just a standard Zigbee switch controlled via Zigbee2MQTT I'd like the logic control to be in NodeRED - not to use any in-built device facility so I can re-use it with any smart switch
Duty power cycling a heater
Are you using a smart relay? What sort? I do it with a smart plug running Tasmota, but the fan heater is only on low, about 500W. The mqtt message to do it is something like { "topic": "cmnd/plug/backlog", "payload": "pulsetime 1000; power on" // Switch relay on; turn off again after 15 minutes }
Duty power cycling a heater
I want to switch a fan heater on and off with variable on/off times e.g set on time for x mins - off time for y mins Anybody doing this and got a simple flow I could borrow?
Rise in AI generate replies
Useful article (and it mostly works). Better, more relevant, Search Results. (Although this didn't seem to help in my case). jbudd: Do you have examples of that? It would appear that Word Priority is losing influence on results. First word = highest priority.
Rise in AI generate replies
jbudd: duckduckgo That, Brave Search, possibly StartPage are all more useful than Bing or Google Search. But Google is by far the worst, I gave up on it when I realised that it rarely gave me what I actually searched for, only what it wanted to show me (presumably whoever had paid the most to get priority).
Rise in AI generate replies
gregorius: And it's only getting worse mudwalker: Search Engines are losing their accuracy Do you have examples of that? It does seem obvious: AI makes false claims. New claims are partly based on those claims. Errors proliferate. And yet I find the "Search assist", presumably AI, at the top of the search results is remarkably helpful. For example if you were to ask in Youtube "Who built the pyramids", you would find plenty of AI and human misinformation pointing to aliens and laser beams. But…
Rise in AI generate replies
mudwalker: Search engines (AI???) these days give the information they think you should know, not the valuable information you need despite many approaches to the search terms. Well Google Search has been FUBAR'd for years and I'm told is now even worse because of AI slop. Not used it for many years now. I use one of the privacy enabled alternatives. Currently I mostly use Brave Search. It does offer an AI answer at the top thanks to their own Leo which isn't the smartest AI but isn't too bad.…
Rise in AI generate replies
Just had to rebuild my Web Server. Messed up when I tried to update to PHP 9.5. Nextcloud Server still served, but was on a go slow so my Cal/Webdav connections would time out. I spent a long time (hours) trying to configure Nextcloud to access the MariaDB/MySQL Database. Stupid mistake, the Database is not an http/s connection, it doesn't heed http at the front of the IP. I stay away from AI when trying to configure things, it has always given me duff information, well, mostly duff. Spent…
Rise in AI generate replies
I would warn people that AI is not always tight, and for NR I have seen many very bad errors from AI demonstrating it is poorly trained on the workings of NR. I recognise many of them as I have been using NR for many years bit I also get caught out but I am better than AI at NR. So people who are not well versed in NR, there is no point getting AI to compose a response to someone elses issue when you do not have the experience to vet that response. The result is you will more likely get 'egg on…
:tada: Node-RED 5.0.9 and 4.1.17 released
Any news on a new maintenance release? The official Docker container could use an update with the latest Node.js release.
UX: Safe triangles for menus interactions
Have you seen this writeup on the issue? I just stumbled on it and it goes through alternative solutions and provides a playground for testing various solutions.
Running Node-RED for Canadian clients: keeping flows, data and logs in Canada
I would check this at the network boundary, not only by reading the flow JSON: an HTTP Request, Function or third-party node can build its destination at runtime. For the deployed instance, deny outbound traffic by default, route approved destinations through a logging proxy, and review DNS/proxy/firewall logs while exercising each flow with representative inputs. Include the container/host, backup agent and update jobs in that test; an IP geolocation list is a weak substitute for an explicit…
Astronomy Engine
I have been playing around with the addition, Astronomy Engine npm_ package. What a fantastic addition this is and well worth a play with. After it is installed you will get a Global data ref called Astronomy in your node red workplace. Just a quick check afterwards to see the list of commands const Astronomy = global.get("Astronomy"); msg.payload = Astronomy; return msg; Then you can start building. I have created multiple observation locations and you can then use that to feed the function…

🌐 UIBUILDER FAQ: The simplest possible way to show some Node-RED data on a page
No code needed, just a default uibuilder node and an input message. All of UIBUILDER's front-end templates including the default, all have the following in the HTML: <div id="more" uib-topic="more"></div> Even if you don't know any HTML at all, this should still give you some clues. Now send a message to your uibuilder node with the msg.topic set to more and the msg.payload set to "Hi there". Not very exciting? Well, it is the start. From there, you can update the page title and copy/paste the…

🌐 UIBUILDER FAQ: How to show tabular or list information on a web page using data from Node-RED?
UIBUILDER for Node-RED has several ways of displaying tabular or list data on a web page with little to no front-end coding required. Shown here are the 2 simplest methods with little to no code required. For examples, lets assume you have messages like these: { topic: "mytable", payload: [ { col1: 'Row 1, Col 1', col2: 11, }, { col1: 'Row 2, Col 1', col2: 22, }, { col1: 'Row 3, Col 1', col2: 33, }, ], } { topic: "mylist", payload: [ 'List entry 1', 'List entry 2', 'List entry 3', ], } The…

HVAC company question: Node-RED flow for filter and service reminders from thermostat runtime?
Cool! I work in Norway with HVAC or actually entire buildings to control and reduce energy consumption. We use modbus, bacnet or other protocols to speak to devices, like ventilation and heatpumps and they will report temperature, alerts, fan speed etc. We then send those to Thingsboard and can set up alarms based on telemetry there. Since some of this equipment can be quite old, like a decade or more, they can be noisy, so we take into account configuring how much alarms we want, how often…
Problem building node red locally
Oh yes, those docs need updating. Apologies for missing that. On the whole, use npm run <task> in place of grunt <task>
Problem building node red locally
Colin: Running Node-RED from source : Node-RED This documentation is outdated: File node-red/node-red CHANGELOG.md?plain=1 e4f7fc516 - [5634] Junctions and ports on hover disappear with light theme (#5635) @n-lark - [5636] V5, B5 : Sporadic Panel Height Calculations (#5638) @n-lark Runtime - Fix build scripts for windows (#5687) @knolleary - Set minimum node.js version to 22.9 (#5678) @knolleary - Update to latest npm (#5677) @knolleary - Update some dev dependencies to clear audit noise…
Rise in AI generate replies
Colin: appears, will allways do that. ... and be sometimes correct. When I said "human", I was thinking of used car salesmen (I won't gender that), which I believe was the main training material for most of the AI models available today. And that answer proves my point, that even I am a human - sexist, half-truths and totally wrong, all in one sentence. EDIT: AI is a bad case of SISO: shit in, shit out. And it's only getting worse.
Rise in AI generate replies
A human may give you an answer that looks plausible and try to keep you happy, but AI, it appears, will allways do that.
