P
My websites are backed up daily with incremental backups automatically by Plesk. My storage has 100 GB, the backups are 75 GB in size. One of the backup files (when starting a new incremental cycle) is a little bit over 25 GB. It seems that Plesk uploads the new file first and then deletes the old file. This leads to an error, because the space is not enough (a little bit over 100 GB is needed). So the incremental cycle stops at this point (old file is never deleted, because the new file is...…
P
Hello Unfortunately, my previous post was deleted. So here’s my request again: Since updating to version 18.0.81.4, I haven’t been able to install any Plesk updates. When I try to install updates via the web interface, the connection times out with a “Server not reachable” error. When I try to install the latest version via SSH using “plesk installer update,” I get the following error. (Log truncated) Code: ERROR: Not found source for system packages (release 20.04) in APT software... Read more
P
MailEnable has announced the release of versions 10.61 and 10.62, which address several security vulnerabilities. However, Plesk continues to show version 10.60 as the latest available version for both the mail server and webmail components. Can you confirm whether Plesk plans to include these security updates in an upcoming release and, if so, when we can expect them to become available?
P
How to stop Plesk making backups for a certain account on the server? This sounds simple, right? But it isn't. The account in question has no account-level backup's scheduled. The account in question is still part of the server wide weekly backups. We can't find any way of excluding this account/subscription from the Plesk server wide backup. Can this be done?
P
Hello, I got another problem with the Joomla! Toolkit. I can start "Find Joomla! Websites" and it finishes without an error, showing certain Joomla! installations. Unfortunately it does not show all my instances and I got no clue, why some of them are missing. The missing installations work properly and the file structures are equal to the ones shown in the Joomla! Toolkit. There is no site shown as "Broken" or "Detached" as well. I compared all the shown and missing instances, but could...…
P
Dear members of our community! I have long wanted to identify those areas whose representatives are most widely represented on our forum. Experts of which areas of the hosting industry write and looking for information on our forum? Let's sort it out with help of this simple survey below. If you did not find a suitable option, write in the comments. NOTE: I understand that it may be difficult to make a choice if you are working in different areas. Therefore you can vote twice - for... Read more
P
Username: TITLE API-RPC - Request more details PRODUCT, VERSION, OPERATING SYSTEM, ARCHITECTURE Last version PROBLEM DESCRIPTION php_error.log with a lot of request [2026-11-08 14:07:33] 23072:6af07414bfb71 INFO C:\Program Files (x86)\Plesk\admin\plib\api-rpc\Agent.php:52 [api-rpc][] Incoming API-RPC request [f8a20618ae764f23eaa9cbad370cc18b]: <?xml version="1.0" encoding="UTF-8"?> <packet version="1.6.5.0"> <server> <get> <admin/> </get> </server> </packet>... Read more
P
Hi all, In the latest Plesk Obsidian 18.0.58 we have released our new tool to upgrade MariaDB to a supported LTS branch from Plesk UI. To upgrade your MariaDB server without this tool you need to execute a lot of steps in SSH terminal on the source and destination version of the MariaDB server. Our tool checks configuration, performs DB backup, configures MariaDB package repositories, performs the upgrade, and runs necessary post-upgrade actions. Currently, this function is in... Read more
P
Hello, I can't seem to get log anonymization to work. It worked fine until the log rotation bug in the previous versions, but not anymore. After I updated to 18.0.43 the logs have started rotating again, but the IPs are not anonymized any more. I've tried toggling the feature on and off in server settings... but still nothing happens when the logs are rotated. What can I check to see what the issue is? Thanks, George
P
Username: TITLE Raw message IDs visible instead of messages/translations PRODUCT, VERSION, OPERATING SYSTEM, ARCHITECTURE Plesk Obsidian 18.0.81 Update #6 CentOS Linux 7.9.2009 (Core) Plesk Obsidian 18.0.82 Update #1 AlmaLinux 10.2 (Lavender Lion) PROBLEM DESCRIPTION Often when I open Plesk, the dashboard shows raw message IDs instead of the correct messages/translations. This happens on two of my Plesk servers (both versions mentioned). Often it can... Read more
P
Hello, since the last update to Plesk Obsidian 18.0.81 Update 4, I can't start the web installer any more. The update page says "connection failed" Ive tryed in the ssh console "plesk install update" an get the error message "ERROR: Not found source for system packages (release 20.04) in APT software sources configuration" Code: root@lvps46-163-118-88:~# plesk installer update Doing restart of Plesk Installer... Datei wird heruntergeladen products.inf3: 0% Datei wird heruntergeladen... Read more
P
I am running a multisite-wordpress installation with about 30 sites, half a dozen of which are mapped to 2nd-level-domains aliases, the rest are subdomains of the master domain. I created a wildcard domain as an alias to the master domain, as well as the various 2nd-level-alias-domains. All of them are secured by one Let's-Encrypt certificate. Everything ran smoothly for the past several months. One of the 2nd-level-alias-domains was transferred away to another provider. Next time the... Read…
P
Hello, How can I solve this problem: Error: Cannot get package list: 2026-11-04 09:44:23 INFO: pum is called with arguments: ['--list', '--repo-info', '--json'] 2026-11-04 09:44:23 ERROR: Previous Plesk installer call finished unsuccessfully. PUM will not perform any update operations until Plesk installation is fixed. 2026-11-04 09:44:23 ERROR: Exited with returncode 50. Thank you
P
I've been trying to set per domain settings for PHP in PHP Selector. I'm sure it used to work, but isn't now. We have a new domain and website going up on a customers account. The domain and site on there is running on 7.3. The new domain requires at least 8.3. I've set the per domain setting for the new domain but it is still showing 7.3. CloudLinux Manager (7.11.53-1) LiteSpeed Web Server Enterprise 6.3.7 Any ideas would be greatly appreciated.
P
1) A perfectly installed default setup of Plesk on Alma 10. 2) The Alma 10 kernel was upgraded to the latest version. --> The server boots, all services are coming up, but the Plesk firewall. It cannot be started with error "status=4/NOPERMISSION". SELinux is off, no Apparmor or other solutions are present. iptables is empty nft has plenty of bans from Fail2Ban Everything looks OK including network services, but as iptables is not populated / Plesk firewall service does not start, all... Read…
P
Hello, After updating to Plesk Obsidian 18.0.81 Update #7, some applications using AJP connectors stopped working, with Apache logging the following error: proxy_lock: refused proxy backend ajp://localhost:XXXX After investigating the issue, we identified the newly installed Apache module mod_proxy_lock (plesk-mod_proxy_lock) as the cause. Disabling the module by renaming /etc/httpd/conf.d/proxy_lock.conf and restarting Apache immediately restores normal operation of all affected... Read more
P
In Changelog I found this This update addresses a critical security issue. We strongly recommend that you apply it as soon as possible. Click to expand... for Plesk Obsidian 18.0.74 Update 2 and Plesk Obsidian 18.0.73 Update 5. If this is so very important, why is no corresponding notification sent to the admin account by email? I receive an email when an update has been installed automatically, but not when urgent action is required? Or has anyone received such a notice?
P
Hello Plesk community, I would like to share a new free extension I've developed for Plesk: Plesk Backup Rotation Manager. The extension was created to provide greater flexibility when managing backup retention and rotation policies alongside the Amazon S3 extension. Key Features Full backup followed by incremental backups. Configurable backup cycles: Every 7 days Every 14 days Every 21 days Monthly cycle Automatic restart of backup cycles after... Read more
P
I'm trying to upgrade MariaDB using the built-in MariaDB Upgrade feature in Plesk. **Current database configuration:** - Database server type: MySQL / MariaDB / Percona - Current MariaDB version: 10.11.19 - Available upgrade versions in Plesk: MariaDB 11.8 and 12.3 Unfortunately, the upgrade cannot proceed because the pre-upgrade checks fail at the step **"Analyzing databases with mysqlcheck"**. All previous checks pass successfully, including system compatibility and parsing... Read more
P
Yes i did a search first but obviously no one had the exact same issue or i missed it. This is the output i see when trying to upgrade: Trying to follow the steps leads nowhere. Step 2 ends up in: dpkg: Fehler beim Bearbeiten des Paketes plesk-dns-bind-driver (--configure): Abhängigkeitsprobleme - verbleibt unkonfiguriert Fehler traten auf beim Bearbeiten von: bind9 plesk-dns-bind-driver Step 3 quits with: you already have the latest version of product(s) and all... Read more
P
At the moment, ARM64 servers can only run Plesk if Ubuntu Server Linux is used. Given that Plesk already supports AlmaLinux on X86_64, and that there is an ARM64 version of AlmaLinux, can you shed any light on when Plesk Inc plans to support AlmaLinux running on ARM64?
P
Hello, I am investigating an issue where incoming emails from Zoho Campaigns consistently end up in the Spam folder on a Plesk server. After checking DNS, verifying the signatures locally, and capturing the Postfix–milter communication, I traced a whitespace change to the processing performed by psa-pc-remote or one of the mail handlers it invokes. Has anyone encountered this behavior, or is there a known bug or supported fix? Environment Code: OS: AlmaLinux 8.10 x86_64 Plesk... Read more
P
Title: Request for Comprehensive TuxCare Coverage Matrix — Operating Systems and PHP Versions I'd like to suggest that Plesk publish a comprehensive, regularly updated reference explaining exactly what TuxCare covers within the Plesk environment, particularly as it relates to operating system and PHP extended security support. While there is information scattered throughout the Plesk website and knowledge base, I've found it difficult to locate a single, definitive source that... Read more
P
I’m running AlmaLinux 9.8 with Plesk PHP 8.5 and would like to use Imagick to save images in AVIF format. According to phpinfo(): Imagick module version: 3.8.1 ImageMagick compiled and loaded version: 7.1.2-30 Q16-HDRI AVIF is missing from the supported formats list. Click to expand... GD has AVIF support enabled, but my application uses Imagick. Is there a supported way to add AVIF encoding support to Plesk’s PHP 8.5 Imagick package while retaining Plesk-managed packages and... Read more
P
I recovered a backup to a different VM with different resources than the initial VM. All went well, expect that on the Home dashboard the total memory displays the memory of the older VM, rather than the actual memory available on the current VM (which is 16GB). It's a minor, cosmetic, issue of course. But I am still curious if this is solvable.
P
Hello, Our server runs PHP 7.4.16, which is affected by known security vulnerabilities, and we need to apply the security patches. However, PHP 7.4.33 never shows up as an update in Plesk, and I’d like advice on how to solve this. Environment Cloud: AWS EC2, Europe (Frankfurt) OS: Ubuntu 16.04.7 LTS (end of support) Plesk: Plesk Obsidian, installed in 2021 (version: [Obsidian 18.0.34]) PHP: 7.4.16 Hosts 4 domains, including a CakePHP application Mail: hosted on... Read more
P
Hi I have a dedicated server with Centos and Plesk, unfortunately changing the administrator password from SSH and MariaDB created a big problem. If I try to access the Plesk administration panel I get the following output 500 Plesk \ Exception \ Database DB query failed: SQLSTATE [HY000] [1045] Access denied for user 'admin' @ 'localhost' (using password: YES) gender Plesk \ Exception \ Database Message DB query failed: SQLSTATE [HY000] [1045] Access denied for user 'admin' @ 'localhost'…
P
Hi, I need to add a directive from within Plesk (Additional nginx directive) The aim is: 1. Allow users to access URIs beginnig with specific words. 2. The word can be "a folder name" or just a word in the path immediately after mydomain.com 3. I need to allow myself to access URIs blocked for others I have created the file ".htpasswd" containing a generated string (username and password). It is located in "/var/www/vhosts" outside "mydomain.com" I have sought the help of AI on... Read more
P
Hi! I need to add some kind of disclaimer in html to every email address from one domain. I found alterMIME which looks fine. But I have a question: is it safe to modify /etc/postfix/master.cf and add files to /etc/postfix/ ? Or how to do it without worrying that some Plesk updates will reset configuration? In some KB article I found warning: Warning: any customization made in Postfix configuration can be overwritten by Plesk update (for example, in case of bug fix, when... Click to expand...…
P
Hello dear Plesk Community, I have some questions and hardly find answers that help me I host a few domains and websites and want to run several mail servers that I already have. How can I make it so that each domain has its own smtp host so does not point to one, but this is not absolutely necessary. More important point is I use postfix and wanted to configure a specific signature for a domain that is always added to the email with company name and email address and more, but I can't... Read…