XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

Weather-Watch Forum - Latest posts

Latest posts

GW3000 firmware

I assume you have followed the advice for for formatting the SD cards as only FAT is supported. The files should have names like 202611A.csv or 202611Allsensors_A.csv, possibly both. Although I’ve not tried they are supposed to work as hot plugable cards so they should be removable while running. Have you tried power cycling the GW3000? Does the WEBUI show the correct size, type and your selected interval OK. Have you tried downloading the file(s) shown and view as CSV files in a spreadsheet?…

FTP-upload times

Hi, good morning, The com port is set correctly since the Davis station talks to the PC. That’s what I’m trying to do. I usually set the date to the previous one and in the past it took the data of the last 24 hours. When I click on “Set”, nothing happens. Please see screenshot. Cheers

GW3000 firmware

I am using (trying to use) the SD Card. I re-formated the card to see if that helped. A file was created, but nothing is getting written to it. My data is being sent to ecowitt.net. I have also tried to reset t he gw3000 to factory defaults. I have tried 2 different SD cards and I get the same results

FTP-upload times

I’m not quite sure what the problem is: Are you unable to extract the data from the datalogger when WD restarts, so it’s not automatically starting the download from the time WD was shut down. Or have you lost the connection to the datalogger when WD restarts? If it’s #1 then you can manually set the date & time to get the data from by going to Control Panel > Data Logger > set the date & time in the bottom left of the window, press “Set” and then restart WD. If it’s #2 check you have the data…

Weather Display Main Screen Monitor

Hi. I’m running the very latest WD version with my Windows 11 PC. I have a multiple monitor setup and would like to be able to have the WD main screen displayed on a particular monitor when the WD program is opened without having to drag it to the monitor I want it displayed on. Is there a way to set the monitor where the WD will always open to? Thanks for your help.

N00b weather station set up suggestions

administrator: The kit you were looking at includes a Console as a collector of the data anyway without needing to upload anything to WeatherLink Live itself. You can download straight from the console? I know there is a free account with WeatherLink, but I don’t like being beholden to a company. I like buying a product and I actually own all of it, including the data.

N00b weather station set up suggestions

The kit you were looking at includes a Console as a collector of the data anyway without needing to upload anything to WeatherLink Live itself. It is possible to create your own data collector using an SDR receiver but you’re jumping into advanced territory there for little benefit. You could build your own sensors too for a completely bespoke solution, but it’s a lot of extra work.

Current High temp Missing

If it’s changing the text colour then, when you change it back to what you want it to be, make sure to click the OK button on the colour choice window and to close the Colour/Font Setup window. This “should” make sure it’s saved it for good. I can’t think of anything else which would cause the text colour to change. Thinking about it, when the Max Temp text colour changes, do you also see the same issue with the current temperature & Maximum Gust Today, along with the time for Max Gust & Max…

N00b weather station set up suggestions

The Doctor might help in the afternoon, but the aspirated shield helps whenever it’s sunny without much breeze. The Ecowitt gateway is a piece of hardware - Ecowitt GW3000 Wi-Fi & Ethernet IoT Weather Station Gateway with Built . It pulls data from all your sensors into it for pick up by weather software and/or sending off to the Ecowitt network. It’s a bit like WeatherLink Live. Take a look at a CumulusMx web site (created using cumulusutils) to see the kind of data you can see online from…

N00b weather station set up suggestions

Thanks for the reply. There is some really useful information there. I think I’ll be setting up the weather station in a fairly sunny spot, given Rockingham’s climate and the number of sunny days we get here. Rockingham’s climate averages (BOM) It sounds like a fan-aspirated radiation shield might be worth considering. I noticed Davis recommends one where there is limited natural airflow. However, we get the Fremantle Doctor coming through most afternoons, so I’m wondering whether that provides…

Quakes script Saratoga

I reinstalled the quake-json.php script from Saratoga. Although earthquakes appear with descriptions, they are not highlighted on the map. I am attaching three scripts. I would like some help. Thanks in advance for your help. Marian quake-json.php.txt (76.3 KB) quakes.php.txt (5.3 KB) quakesjson.txt (1.6 MB) wxquake.php.txt (7.5 KB)https://celinmeteo.com/wdisplay/wxquake.php

AI - A change of heart

beun.net: Let me know what you think: https://meteohilversum.nl Very nice. Looks much more modern than the old version. Claude is good at graphics as well as coding. I asked it to darken the shade of some pale blue text and graphics in a logo. It did it and told me that it had changed the colour of the seagulls and waves…the logo graphics were indeed stylised seagulls and waves!