R
After hours of testing and retesting, I'm about to give up on installing my RTL8821CE under any flavour of Linux available. I've tested many distros, but the only place where this driver works straight out of the box, is under W10 and W11. I'm using focal with KDE in case this is relevant in any case. Kernel version 5.15.0-46. I've been reading hundreds of answers around, and I cannot find one that is less useful than the next. None scratch a possible solution to me unfortunatelly. What I have…
R
I have Ubuntu 22.04 LTS and Windows 10 on my laptop. And I have sound interruptions in my bluetooth headphones, which is caused by dual booting with Windows 10 (I know this, because when I had only Windows 10, there were no sound interruptions, but when I installed Ubuntu then audio interruptions started on Ubuntu and on Windows.) I hope I was able to describe my problem. So, I hope you will help me! P.S. I can't uninstall Windows or Ubuntu. l spci -knn | grep Net -A3; lsusb: 3c:00.0 Network…
R
I have been trying for a while to connect my mouse and keyboard using barrier between Ubuntu and Windows. I tried different way to connect. for example changing port, disable enabling SSL, putting same device name and so on, but nothing is working. I tried Windows as a server and also tried Ubuntu as a server, but could not connect. In server's log it shows: "waiting for clients" \n "server status : active" In client's log it shows: [2022-05-20T00:51:46] WARNING: failed to connect to server:…
R
after a reboot my Acer Laptop is stuck on a boot loop, in the upper left corner also appear the message "Reset System", I tried reinstalling ubuntu but this didn't solve the problem. I used boot-repair and pasted the log here: https://paste.ubuntu.com/p/n8x8SBwpS9/ What can I do? Thank you in advance
R
I'm struggling a bit with running Timeshift from command line. My disk structure look like this: sda 8:0 0 1.8T 0 disk ├─sda1 8:1 0 512M 0 part /boot/efi ├─sda2 8:2 0 1G 0 part /run/timeshift/backup └─sda3 8:3 0 1.8T 0 part └─ubuntu--vg-ubuntu--lv 253:0 0 100G 0 lvm / sdb 8:16 0 232.9G 0 disk └─sdb1 8:17 0 232.9G 0 part /run/timeshift/backup So, I would like to create a backup on the sdb1 disk, using: sudo timeshift --create --comments "Test" --tags D --snapshot-device /dev/sdb1 gives me the…
R
Is there any command line tool can be used to convert a Socks5 proxy to HTTP proxy? I searched for an answer from 2015 that said I could use Polipo, but it has been discontinued. Is there any other tool can do it? Thanks a lot.
R
I am writing a script where I need to switch WiFi networks. How should I scan if the WiFi I want to connect is available or not? I tried the following: nmcli dev wifi list Issue: It lists previously scanned networks, which includes available and non-available networks. nmcli dev wifi rescan; sleep 10; nmcli dev wifi list; Issue 1: It just starts the scan and exits while the scan is running in the background. I could not find how to detect if the scan is finished or not. So I used added waiting…
R
I'm new to linux environment. I created a file s1.c in a folder named 'program' which is present in desktop. When I try to compile my code using "/program gcc s1.c " it's showing "gcc: error: s1.c: No such file or directory gcc: fatal error: no input files compilation terminated." What may be the problem
R
Ever since a recent update of Ubuntu (through the standard update prompt - not a major version update), the "cable snake" symbol keeps appearing in the taskbar every few seconds. i.e. the symbol with the three dots below: Why does it now keep appearing and how do I stop it? I would like to make it stop constantly appearing and disappearing because it is distracting. OS: Ubuntu 18.04.5 LTS Package: bolt (0.5-0ubuntu0.18.04.1). system daemon to manage thunderbolt 3 devices. Related question: What…
R
I have a problem with my backup external drive. Can you help please ? EDIT I ran chkdsk from a windows machine. There messages with sectors issues. Now I still have the display below with "?" when I list the directories from my linux machine. Is it possible to retrieve what's in BackupsmonPC ?? ro:LACIEBIG$ ll ls: cannot access '.Trashes': Input/output error ls: cannot access 'BackupsmonPC': Input/output error ls: cannot access 'Results': Input/output error total 42M d????????? ? ? ? ? ?…
R
I'm trying to install Ubuntu Server 20.04 on a new system. The system has a Gigabyte TRX40 Aorus Master motherboard and I have used Raidxpert2 to create a RAID1 array across two NVMe drives. When I run the Ubuntu Server 20.04 setup process, it doesn't seem to see the array. Instead, it gives me the option of installing to either of the underlying drives. I've done some Googling and found this driver for AMD chipset raid, but it seems that in order to install it you need Linux to already be…
R
I got a T480 recently, and I am trying to use the Fingerprint reader on it. I installed fprintd and then ran fprintd-enroll but it hasn't worked as it says it can't find any device. I'm really new to Linux, but would love to get my fingerprint reader working. I'm on 18.04.
R
I want to switch to the Nouveau drivers. I'm using the Nvidia drivers in KDE, Ubuntu 20.04. What's the best way to switch to using xserver-xorg-video-nouveau? I have seen numerous threads talking about how to switch TO Nvidia drivers, but I want to switch to the open-source ones. Previously there was a GUI for doing this, but that hasn't been functional for a while and is actually no longer available. The 'ubuntu-drivers' command doe not seem to work. I tried: ubuntu-drivers install…
R
I want to add 169.254.169.254 to loopback interface so I can use "metadata" to unambiguously refer to the host from docker containers. I don't want to run a docker container for it, so I thought of adding it to /etc/network/interfaces. So I've tried auto lo iface lo inet loopback auto lo.1 iface lo.1 inet static address 169.254.169.254/24 but that complained that lo.1 does not exist. Then I tried just auto lo iface lo inet loopback iface lo inet static address 169.254.169.254/24 but it did not…
R
I am dual booting Ubuntu 20.04 installed with a dedicated home and swap partition. I encrypted both home and swap using encryptfs after install. Since then no issues or whatsoever. After running some updates today I got a warning message at boot stating that: cryptsetup: WARNING: Option 'size' missing in crypttab for plain dm-crypt mapping cryptswap1. Please read /usr/share/doc/cryptsetup/README.initramfs and add the correct 'size' option to your crypttab(5). Following the suggestion in this…
R
I try to install mp4fpsmod on Linux 4.19.104+ x86_64 Ubuntu 18.04.3 LTS in Colab. To reproduse please copypaste these three lines into a Colab cell and hit shift+enter: !git clone -qqq https://github.com/nu774/mp4fpsmod.git > /dev/null !sudo apt-get update -y -qqq --fix-missing && apt-get install -y -qqq autoconf > /dev/null !cd mp4fpsmod/ && ./bootstrap.sh && ./configure && make && strip mp4fpsmod && make install The error in ./bootstrap.sh: Running autoreconf... autoreconf: Entering directory…
R
I am trying to revive an old Lenovo Ideapad Z360 laptop using Ubuntu 20.04 LTS. This laptop has an integrated Intel GPU and a discrete Nvidia GPU, as follows: $ lspci -k | grep -EA3 'VGA|3D|Display' 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) Subsystem: Lenovo Core Processor Integrated Graphics Controller Kernel driver in use: i915 Kernel modules: i915 -- 01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [GeForce 310M]…
R
Is there any working utility that can simulate mouse movements on a ubuntu? Important: I only want that utility to control the mouse if the machine is idle for X minutes. Of course I could use xdotool to simulate some movement, but how would I detect if the pc is idle for x minutes? I could not find any working tool for linux...
R
I'm using Nginx on Ubuntu 18.04 with LEMP installed, recently I renewed my SSL certs therefore I can see some files with named . SSL cert related files last 2 files comes with .zip private.key (same as old) public.crt (renewed) STAR_sellist_com.ca-bundle (renewed) STAR_sellist_com.crt (renewed) My earlier nginx configuration server { listen 443 ssl; server_name dev.sellist.com; ssl on; ssl_certificate /etc/ssl/nginx/public.crt; ssl_certificate_key /etc/ssl/nginx/private.key; this works before…
R
I am trying to connect to a my SSH server (running on Ubuntu 16.04.2 LTS) from my local machine (Ubuntu 18.04.03 LTS). I have created a private and public key on my local machine and copied my public key to my SSH server's authorized_keys file. I could log in with ssh root@ip-address and I have access (as root user), but when I tried to log in as another user with command ssh name@ip-address, it generated an error message: name@ip_address: Permission denied (publickey) What can I do so the…
R
How I can create an script to backup my PostgreSQL databases on Linux systems using pg_dump? I am already using the following comand but I want someting that executes with no user interaction. pg_dump -U postgres -W -Fc This asks for a password and if I use the -w flag, it asks for a pgpass file.
R
I have Ubuntu 16.04. And the media buttons on my keyboard (previous, play/pause, next) randomly work or don't work with Spotify. So sometimes when I hit the button they do the job, then they stop working. Sometimes they go back to functioning. Buttons to (dec)increase volume always work (but volume is system-wide, not Spotify). How to fix that?
R
I've tried using commands but all it gives me is: mount: [DIRECTORY]: wrong fs type, bad option, bad superblock on /dev/loop29, missing codepage or helper program, or other error. it works with ISO file but not MDS or MDF? help
R
I use Thunar instead of Nautilus on Ubuntu 18.04. This works fine, but any application still uses Nautilus instead of Thunar when saving/opening etc or when opening directories/mounted drives from the desktop. I have already tried running: xdg-mime default nemo.desktop inode/directory This had no effect That possible solution was from this thread: https://askubuntu.com/a/1043504/953041
R
I'd like to have my own signature as a stamp for Okular. In folder /usr/share/okular there is a config file drawingtools.xml and in folder /usr/share/okular/pic the is a stamps.svg containing some pictures with stamps. But it seems not to be made for adding more pictures. Is there a easy, lean and clean way to insert my own graphic? Edit: I found this: source: https://wiki.ubuntuusers.de/Okular/ Eigene Stempel definieren Okular bietet die Möglichkeit, eigene Stempel zu definieren, die dann als…
R
Calc stops responding when opening ~30mb .xlsx My task is to open the .xlsx and export it as a csv. Is there a way (on Ubuntu) limit the number of rows that are loaded into memory? After attempting 10 times, I got the file open, but it took 5-10 minutes minutes. The file contains ~150.000 rows and 10-20 columns each, on 5 sheets. (no images, pure text). Similar files open slowly with Calc but will eventually open. My pc has 16BG ram and i7 cpu, so I doubt it is a hardware issue. This problem…
R
I wanna play second life in my Xubuntu when I have installed without any problem but when I click on the icon doesn't appear anything... When I run it at terminal it shoots me a message that says it couldn't find gftools-2 and it say too that I need to install ia32-libs but when I try to install this libraries terminal says that it doesn't exist, then... Somebody could help me to get second life works? NB: I downloaded the tar from the official page for Linux systems. Update $ sudo ./secondlife…
R
I am using Ubuntu downloaded from the Windows Store in Windows 10. It doesn't seem to be possible to use multiple terminal windows. Is the only way then to install a GUI and use this with the X server. I feel like this would defeat the point of using Ubuntu for Windows. I can imagine it working quite slowly. And I have to download 2GB of GUI.
R
From Ubuntu 18 lts I'm trying to establish ssh connection with my Kali Linux VirtualBox on the same computer. I've already installed openssh-client and openssh-server on both systems and I'm connected to Internet via ethernet cable. So, I have 'enp2s0' interface (on both systems) which is found in 'ifconfig' and I changed my network ipv4 addresses to static with the same IP addresses I found in 'ifconfig': In Ubuntu: IP: 192.168.1.8 In Kali: IP: 192.168.1.5 Netmask: 255.255.255.0 and Default…
R
I am running xrdp on my Ubuntu 18.04 computer. I got 3 users. Two is working well. They can connect from Windows 10 rdp without any problem. But the last one does fail with a "Connection problem, giving up" message. And it is that user I use myself. I have spend a lot of time researching and looking at log-files without any luck. I did remove and install xrdp again - no change. I might have done something to corrupt the settings for this user. It did work for some time. If I only could somehow…