XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

Adafruit Industries – Makers, hackers, artists, designers and engineers!

electronics, open source hardware, hacking and more...

Why thrifting for clothes stopped working

Emily Velasco posted on Mastodon about a problem that’s hard to solve: she doesn’t know how to shop for clothes anymore. She spent about 15 years buying all of her clothes secondhand, partly because a modern wardrobe cost too much and partly because she found new clothes boring. She lists three reasons thrifting doesn’t work now. Fast fashion means thrift stores are full of the cheapest stuff. People sell their interesting old clothes on Depop and similar sites instead of donating them.…

Build a portable radar station with a Raspberry Pi and SDR

Julian Horsey at Geeky Gadgets covers a handheld flight tracker built by Jdaie Lin. It pairs a Raspberry Pi with a software-defined radio, a receiver that tunes radio signals in software instead of fixed hardware. The SDR picks up ADS-B, the position and status messages planes broadcast, and pulls out altitude, speed and coordinates. A touchscreen shows a live radar map of nearby aircraft, and a Pi Sugar battery pack makes the whole thing portable. An external antenna and physical controls help…

Nintendo tried to kill Switch emulation, but the PC is running Switch 2 games now

Alfonso Maruccia writes at TechSpot that a new emulator fork is running Switch 2 games on a PC, about a year after the console shipped. The project is called Eden-NX2, from a developer going by “Takoroka.” It’s a fork of the Eden emulator with experimental Switch 2 support, and it was released just a few days ago. Mario Kart World and Donkey Kong Bananza both run, though compatibility and speed still have a long way to go. Part of why this happened so fast is that Nintendo kept much of the…

Microsoft BASIC for 6502 microprocessor released + web version

Microsoft has posted the assembly source code for Microsoft BASIC version 1.1 for the 6502 microprocessor on GitHub. The code dates from 1976 to 1978, the years when BASIC was the thing that made a home computer usable. The 6502 is the chip at the heart of the Apple II, the Commodore PET and the KIM-1, among others. The listing uses conditional assembly, so the same source builds for several of those early machines depending on which flags are set. The file also carries a revision history from…

LakeShark: the pocket-sized portable SDR scanner

Open Electronics covered LakeShark, a handheld SDR scanner and radio workbench built by SAMS0N1TE. Software defined radio (SDR) has the tuning and decoding happening in code instead of fixed circuits. The build uses the LilyGO T-Display P4, with an ESP32-P4, a 4.1 inch AMOLED screen at 568 x 1232, 16 MB of flash, GPS, a nine-axis motion sensor and a built-in SX1262 LoRa radio. It receives, decodes and displays on its own, without a PC attached. Plug in an RTL-SDR Blog V3 or V4 and it can handle…

The Encyclopedia of Movie Cats

image via A24 Ever wonder about the cats of the big screen? Wonder no more with The Encyclopedia of Movie Cats from A24 featuring more than 1,000 kitties, via Colossal. We love all the pets. Cats have always found their way onto our screens. They act as pets, villains, and accomplices, travel on spaceships, wear human clothes, inherit large sums of money, and drink spilled blood to morph into cat-woman hybrids. They can inhabit so many roles, the only limit to their movie credits is a…

ICYMI Python on Microcontrollers Newsletter: Adafruit Metro P4 Hydra, Possible New Raspberry Pi Boards, JIT Gone and More!

If you missed this week’s Python on Microcontrollers Newsletter, here is the ICYMI (in case you missed it) version. To never miss another issue, subscribe now! – You’ll get a terrific newsletter each Monday (which is out before this post). 12,313 subscribers worldwide! The next newsletter goes out Monday morning and subscribing is the best way to keep up with all things Python for hardware. No ads or spam, no selling lists, leave any time. From the Editor: Welcome to the latest Python on…

Sweary plots, DOOM maps, postcards and more #ArtTuesday

Daniel Catt writes in his newsletter about a new generative system for plotted handwriting art, one that moves away from the rigid magazine style grids he has used before and toward something more organic. The system runs in five stages. “Foundation” splits the page into 3 to 24 rows and draws horizontal lines that attract and repel each other, plus curved verticals. “Grow” runs 1 to 6 rounds of new lines jutting out from that skeleton until they hit something. “Break” drops rectangles…

Alien flora and fauna #ArtTuesday

Adam Rowe, who runs the 70s Sci-Fi Art blog, has put together a roundup of alien plants and animals in science fiction illustration. It starts with an oil painting called “Crash Landing” by an artist signing as Fahellyn, a name Rowe hadn’t come across in 13 years of running the blog. He’s honest about his doubts, wondering if the listing is an AI hoax, though he thinks it looks legitimate. From there the post works through the theme. There’s Angus McKie’s 1976 cover for Casey Agonistes, later…

The Moving Image Archive, over 120,000 public domain film clips #ArtTuesdayy

Jason Kottke writes on kottke.org about The Moving Image Archive, a collection of more than 120,000 clips pulled from almost 2,300 archival films in public domain collections. The archive is a growing library of films that have largely been forgotten, and it is searchable and browsable. Kottke notes that with synthetic footage now able to fabricate the past, keeping verifiable historical footage available matters more than ever. He includes a few clips he turned up while poking around the…

Book reports from VCF West

Michael Martin took a break from building things and instead read through some of the vintage technical books he’s picked up at the Vintage Computer Festival over the years, writing up what he found on his blog Bumbershoot Software. The 1978 PDP-11 book turned out to be a textbook with problem sets, not the reference he expected. It prefers octal to hex, which makes byte operations painful. The part he liked best is how the PDP-11 handles immediate values: it doesn’t have a real immediate mode,…

Windows 95 is still being used to sort eggs in Germany

PC Gamer reports on a chicken farm in Germany that still runs its egg-counting machine on Windows 95. The farm, near Duddeldorf, has a 40 by 40 metre sorting setup driven by software written for an operating system that turned 30 last month. Microsoft’s extended support for Windows 95 ended in 2001. The reason is simple enough. Egg-counting software is a small market, and the programmer who wrote this one isn’t around to port it to anything newer. Farmer Peter Huber told WDR the system has…

How to build an air purifier in 6 simple steps

John Alexander built a DIY air purifier for Popular Science and wrote up how it went. The design is a Corsi-Rosenthal box, or CR box: four square furnace filters taped into a cube, a cardboard bottom cut from the fan’s shipping box, and a box fan on top. The fan pulls air in through the filters and pushes cleaner air out. Assembly took under an hour with tape joining parts together. He bought a Lasko box fan, four Filtrete 20-inch MERV 11 filters, and masking tape at Walmart for $73.58 before…

The Partner-N64PC dev kit for Nintendo 64

Gerry at Behind The Code has a look at the Partner-N64PC, a Nintendo 64 development kit built for Nintendo by Kyoto Microcomputer. It’s a large cartridge that connects to a PC through a ribbon cable and an ISA or PCI interface card, with debugger software running on Windows 95/98. A second version, the Partner-N64NW, worked with Silicon Graphics workstations. The kit doesn’t work with a stock console. The N64 needs tie-lines, small wires added to the board, that route the IRQ and RESET signals…

frank-xt8086: RP2350B firmware acts as the chipset for a real Intel 8086

rh1tech (Mikhail Matveev) has published the first release of frank-xt8086 on GitHub. It’s firmware for the xt8086 board, where a Raspberry Pi RP2350B microcontroller acts as the whole chipset around a real Intel 8086 or NEC V20 processor. That means the RP2350B handles the support hardware an early PC needed, while the original CPU does the work. You flash the frank-xt8086-1.00.uf2 file with a Debug Probe, or hold S3 (BOOTSEL), press S4 to reset, and copy the file to the drive that shows up.…

A hackable analog phone system for your home

Major Hack’s Analog Redial project on Hackaday.io turns one or two old telephones, rotary or touch-tone, into a working phone system. The board supplies real dial tone and ringing, lets the phones call each other, and includes an answering machine. Dial codes are set up from a web page, and you can upload your own audio files to play back. The earlier version ran on a Raspberry Pi. This one uses an ESP32, which costs less to build and does more. The ESP32 sees digits dialed, so the dial plan is…

Killed by Ubuntu, Linux Mint is bringing this classic feature back

Abhishek Prakash writes at It’s FOSS that Linux Mint is bringing hibernation back. The Mint team previewed a new Sleep Modes page in its System Administration tool, planned for Mint 27 in December. It turns hibernation on and sets it up without hand-editing config files. Suspend keeps your open apps and windows in RAM and wakes in a couple of seconds, but the RAM needs power, so the battery keeps draining. Hibernation copies the session to disk and powers the machine all the way off. Ubuntu…

CutScape v0.6.0: an InkScape extension for outputting to 2D plotters, cutters, engravers, and CNC…

Developer jetpax has released version 0.6.0 of CutScape, an Inkscape extension that sends drawings out to 2D plotters, vinyl cutters, engravers and CNC machines. The release is posted on GitHub. This version adds presets for Secabo’s C IV, S and T series cutters. CutScape’s messages no longer trigger Inkscape’s warning dialog, and the whole interface is now translated into French. One caution from the author: the Secabo settings haven’t been tested on a real cutter. They come from driver data…

The solar system may have a sixth dwarf planet, hidden against the Milky Way

Zo Ahmed, writing for TechSpot, reports on an icy object beyond Pluto that could become the solar system’s sixth dwarf planet. The Vera C. Rubin Observatory team in Chile announced it this week under the provisional name 2026 ED138. It sits about 46 astronomical units from the Sun. Pluto averages around 40. Nobody has measured it directly. Astronomers worked back from how bright it looks and an estimate of how reflective its surface is, giving a size between 600 and 1,500 km across. Rubin’s…

6 ESP32 projects to build including an OLED pulse oximeter

Julian Horsey writing for Geeky Gadgets rounds up six ESP32 builds from Hacktuber, starting with a pulse oximeter. It pairs a pulse oximeter sensor with the ESP32 to read heart rate and blood oxygen saturation, then shows the numbers on a small OLED screen. The rest cover a good spread of what the chip can do. There’s a joystick and button keypad for directional input, useful for games or driving a robot. A digital eye drives a round or rectangular display with a blinking animation. A gas…

A homebrew Cray-1A

A project posted on chrisfenton.com describes a 1/10-scale, binary-compatible, cycle-accurate Cray-1A built over about a year and a half. The logic runs on a Xilinx Spartan-3E 1600 FPGA board, filling roughly 75% of the logic and all of the block RAM. The result clocks at about 33 MHz with 4 kilowords of memory, against the original machine’s 80 MHz and up to 32 megabytes. The Cray-1 design is fully pipelined, with 12 execution units and vector registers holding 64 values each. There’s no…

This $48 e-paper display can be whatever you want it to be

Nick Indge, writing for Ars Technica, built out a $48 DIY e-paper kit from Seeed Studio made in partnership with TRMNL. It’s a 7.5-inch e-paper panel and a control board that pings an API, pulls down a bitmap, and shows it. Calendars, weather, stock quotes, lunar phases, whatever plug-in you pick. . There are three ways to run it. Register with trmnl.com, which costs $1 to start a 14-day trial and $50 one time after that. Use Seeed’s free SenseCraft platform and its browser-based firmware…

Rooting an Amazon Echo Dot

Julian Imhof, writing on andystechlab.dev, turned a 2018 Echo Dot 3 into a local Home Assistant voice satellite. Amazon cloud isn’t used in handling the voice commands. The work needs a Linux computer, an open-source project, and a USB cable soldered to the board. The Echo Dot doesn’t have a USB socket, so the USB data lines go to test pads on the board. Once the device is rooted, the Alexa client is replaced with software that shows up in Home Assistant as an ESPHome device. A guided setup…

MIT engineers design a safer, more efficient vaccination system for farmed fish

Zach Winn writes in MIT News about a team at MIT and the U.S. Department of Agriculture that built a new way to vaccinate farmed fish. Today the most effective method uses metal needles. Fish have to be sedated, lifted out of the water and injected one at a time. That’s slow and stressful for the fish, and workers can jab themselves while working fast. The new approach uses food-grade silk micro-needles, tiny needles that stick lightly into fish skin and then break down. Early silk versions…

The Linux 7.4 merge window is easily the largest in kernel history

Michael Larabel, writing at Phoronix, reports that the Linux 7.4 merge window is the biggest one the kernel has ever had. The merge window is the two week stretch at the start of each kernel cycle when maintainers send in their changes for the next release. After it closes, the work moves to release candidates and bug fixing. His breakdown has the numbers behind the claim and what landed this cycle. See more at phoronix.com.

Understanding DC motor principles

A project from electroniclovers on Hackster walks through how a DC motor turns current into rotation, using magnets, a copper loop and a 3D simulation to show the steps. It starts with two permanent magnets and the attraction between opposite poles. Next, current through a copper rod makes a magnetic field around it, and reversing the current flips that field. Put the rod between the magnet’s north and south poles and the two fields push the rod one way. Flip the current and it pushes the other…

NEW GUIDE: Adafruit RV-8803 High Accuracy Real Time Clock #AdafruitLearningSystem @Adafruit

For excellent accuracy time-keeping – when your everyday RTC (Real Time Clock) won’t do – the Adafruit RV-8803 Precision Real Time Clock Breakout Board is a tick-tock above the rest with excellent ±1.5 ppm (at 0~50°C) accuracy. Thanks to the built-in crystal with temperature compensation management, classic RTC drift is minimized so you don’t have to do any time correction with WiFi or GPS to keep current. The Adafruit RV-8803 High Accuracy Real Time Clock guide has everything you need to get…

Google Doodle Pac-Man’s siren call

Marcin Wichary, writing on his blog Unsung, tells the story of the bug he shipped to Google’s homepage in 2010. He wrote the playable Pac-Man doodle for the game’s 30th anniversary, building the whole thing in HTML and CSS, with Flash handling the sound. The playfield spelled out Google’s logo, and a Ms. Pac-Man mode hid as an easter egg. Leadership wanted the doodle to feel bigger, so the game started playing itself after 10 seconds of inactivity. With sound. That seemed fine, since nobody…

frank-dino: a RP2350B helper chip for a real Zilog Z80

rh1tech (Mikhail Matveev) has released frank-dino v1.00 on GitHub, the first firmware for the dino_z80 board. An RP2350B microcontroller acts as the whole machine around a real Zilog Z84C00 CPU, so the Z80 does the work and the RP2350B handles everything else: memory, video, sound and storage. It covers the ZX Spectrum 16K, 48K, 128K, +2, +2A and +3, plus about thirty relatives including Pentagon 128/512/1024SL, Scorpion ZS-256 and ZS-1024, Nemo KAY, ZXM-Phoenix, Profi 1024, ATM-Turbo 1 through…