XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

Adafruit Industries – Makers, hackers, artists, designers and engineers!

electronics, open source hardware, hacking and more...

Stitch Different: LED-Illuminated Embroidery with nOOds #Adafruit Products #AdafruitLearningSystem @Adafruit

Give a classic piece of computer history a glowing upgrade! This project from Erin St Blaine combines the colorful nostalgia of Apple’s rainbow logo with machine embroidery and Adafruit LED nOOds. Learn how to create custom embroidery designs, add flexible LED filaments, and bring your stitched artwork to life. From the guide: Bring a little retro magic into the modern age with glowing embroidered art! Apple’s classic rainbow logo gets a high-tech makeover in this project, combining machine…

JetKVM Mini delivers remote system access for just $39

Julian Horsey at Geeky Gadgets writes about the JetKVM Mini, a small KVM (keyboard, video and mouse) device that gives remote control of a computer over the network, including when a computer is powered off. The JetKVM Mini sells for $39 and the JetKVM Mini WiFi for $42. Both run on an ESP32 microcontroller and take HDMI input, with USB-C for power and for acting as a keyboard and mouse for the target machine. Video comes through at 720p60 or 1080p30, with 4K60 available through the paid JetKVM…

Seeed Studio launches 4.26” Mono and 7.3” Color e-Paper kits preloaded with OpenDisplay firmware

Jean-Luc Aufranc writes at CNX Software that Seeed Studio has released two Bluetooth LE e-paper kits built around the Nordic nRF52840, both shipping with the open-source OpenDisplay firmware already installed. The OpenDisplay 4.26″ Mono Kit uses a 4.26-inch monochrome and grayscale panel at 800×480 with partial refresh. The 7.3″ Color Kit uses a 7.3-inch Spectra 6 color panel at the same resolution. Each one includes a 2,000 mAh battery, a driver board based on the XIAO nRF52840 Plus, and…

Adafruit QT PY ESP32-C3 Case – Snap-Shut Top with Reset Button Access #3DThursday #3DPrinting

JeremyLaurens_210732 shares: An enclosure for a single Adafruit QT PY ESP32-C3 board with a USB-C connector. Top snaps shut with two button cutouts — one for the reset/PIN9 button. Small slit in the back for cables (used by the author to wire in external BME280 sensors). The QT STEMMA version can plug into a STEMMA board. Direct Adafruit-ecosystem pick for CircuitPython users building sensor nodes with the QT PY form factor. By inaudible (Printables) download the files on:…

The Python on Microcontrollers Newsletter: subscribe for free

The Python for Microcontrollers Newsletter is the place for the latest news involving Python on hardware (microcontrollers AND single board computers like Raspberry Pi). This ad-free, spam-free weekly email is filled with CircuitPython, MicroPython, and Python information that you may have missed, all in one place! You get a summary of all the software, events, projects, and the latest hardware worldwide once a week, no ads! You can cancel anytime. It arrives about 11 am Monday (US Eastern…

3D Hangouts – DIY HomeView, Metro P4 Case and Pine Cone

3D Hangouts – DIY HomeView, Metro P4 Case and Pine Cone https://youtube.com/live/cznw89qe3i8?feature=share This week @adafruit Pedro is showcasing his DIY version of the Apple HomeView. Noe is prototyping a snap fit case for the Metro ESP32-P4. Checking out this week’s Timelapse Tuesday model of a pine cone LED holder. Metro EPS32-P4: https://www.adafruit.com/product/6536 7in Pi Touch Display 2: https://www.adafruit.com/product/6079 5in Pi Touch Display 2: https://www.adafruit.com/product/6408…

MariaDB enhances agent development for its next-gen database platform

MariaDB has added four AI agent features to Enterprise Platform 2027, as reported by InfoWorld. They are AI Retrieval, AI Plugins, Agent Memory, and Semantic Cache. AI Retrieval lets agents pull from enterprise documents and live operational data through one managed service, and turns plain-language questions into read-only SQL queries. AI Plugins teach coding agents like Anthropic’s Claude Code and OpenAI’s Codex about MariaDB-specific syntax and newer features such as vector search. Agent…

Pine Cone LED Lantern

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Pine Cone LED Lantern By Animaag makerworld.com/en/models/3496033-kabi-the-pine-cone-led-lantern Bambu X1C PolyMaker PLA 6hr 9mins X:173 Y:119 Z:105mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 129g 230mm/s Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from…

Flexi Penguin – Articulated Christmas Edition with Santa Hat #3DThursday #3DPrinting

michelem shares: A holiday-themed flexi penguin with a wiggle motion and a Santa hat. Fidget toy, tree ornament, keychain, or fridge magnet. Print-in-place, no supports. Christmas hat version included. Rear slot fits 3×1mm magnets. Suited to multi-color printing. Two files: AMS Multicolor (~4.9h, 1 plate) and No-AMS Single-Color (~25 min, 1 plate). Christmas + flexi crossover — the fast single-color version is a great gift-stocking print. By Michele (@michelem) download the files on:…

Nutcracker Decoration #3DThursday #3DPrinting

SabreDesign shares: Christmas nutcracker decoration. VERIFY DIRECTLY — this page could not be read during curation. Confirm the model page is accessible and that content matches a classic nutcracker decoration before scheduling. If unavailable, swap for an alt Christmas-figure pick. Nutcrackers are a traditional Christmas category that hasn’t been represented yet across the Oct 22, 29, Nov 5 Christmas ramp. download the files on: https://makerworld.com/en/models/1932060-nutcracker-decoration…

Claude’s new rules against game cloning won’t stop the AI copying boom

Kyle Orland, writing at Ars Technica, reports that Anthropic has added a rule to Claude Code’s system prompt to keep the model from re-creating specific existing video games. The rule, spotted in a json file named “tengu_heron_brook” around October 27, tells Claude to build original games, genre games and games from a user’s own designs and assets, but not a recreation of a specific existing game, even if it’s renamed. Anthropic software engineer Addy Osmani confirmed the change, saying using…

Self-Employed? Solopreneur? NIST has a cybersecurity guide just for you

NIST has released Small Business Cybersecurity: Non-Employer Firms, also known as NIST Cybersecurity White Paper 50. It’s written for the “solopreneur,” anyone who is the only paid employee of their business. More than 28 million small businesses in the U.S. fit that description. The guide assumes the reader doesn’t know anything about cybersecurity or the NIST Cybersecurity Framework, and it defines terms as it goes. It’s an update to Small Business Information Security: The Fundamentals…

Developing retro-GUIs for Win3.11 and OS/2

Chris, writing at chrisdevblog.com, built GUI apps for Windows 3.11 and OS/2 Warp 3 to control his microcontroller projects on real period hardware. He started with Borland Delphi 1 from 1995, the first and last Delphi that made 16-bit Windows programs. That worked right away, so he switched to Microsoft Visual C++ 1.52 from 1993, where buttons and fields are placed in code instead of dragged onto a form. Searching the web for Win16 API calls mostly turns up Win32 answers, so he used Charles…

Arkivism is a search and visual discovery engine for public domain works #ArtTuesday

Jason Kottke, writing at kottke.org, points to Arkivism, a search and visual discovery engine for public domain works. It pulls together millions of items that anyone can use. The collections come from the Smithsonian, The Met, NASA, the Library of Congress, the National Gallery of Art, the Rijksmuseum and others. Public domain means the copyright has expired or was released, so the images are free to download, print, remix or drop into a project. See more at kottke.org.

GNUstep Desktop: a NeXT user interface for modern Linux

GNUstep Desktop (GSDE) is a Linux desktop environment that gives you a NeXT/OpenStep-like experience. It runs on the GNUstep framework, which is an open implementation of the OpenStep API in Objective-C, and pulls together apps and utilities the GNUstep community has written over the years. The code is compact enough that one person can follow it, and it compiles in about 30 minutes on a Raspberry Pi. The approach is a toolbox rather than one big executable. Apps talk to each other through…

The early history of the UNIX “more” command

Dan Halbert, writing on danhalbert.org, tells how he came to write the Unix more command in 1978 as a first-year graduate student at UC Berkeley. The piece first ran on comp.society.folklore in 1994 and then in The ANALYTICAL ENGINE. Berkeley already had a small program called cr3 that printed 24 lines and rang the terminal bell to wait for a carriage return. The Lear-Siegler ADM-3 terminals around campus rang their bells on output too, so people had disconnected the speakers. That left you…

The first Unix Programmer’s Manual, released in 1971 (free PDF)

MIT CSAIL marked the anniversary on X: Bell Labs released the first Unix Programmer’s Manual in November 1971. The post links a free PDF of the third edition, and credits Diomidis Spinellis (@CoolSWEng) for the pointer. The manual set the pattern that man pages still follow. One short page per command, in the same order: name, synopsis, description, files, bugs. It was written so a person at a terminal could check a flag in a few seconds. CSAIL’s post makes the point that coding agents lean on…

Pulling on a thread (Using Thread on Ikea Sensors)

Ben Hardill wanted to read a pair of IKEA ALPSTUGA CO2 sensors from Node-RED, and wrote up what it took on his blog. The sensors are part of IKEA’s second generation of smart devices, so they use Thread radios instead of Zigbee. That rules out the old Trådfri Hub and Zigbee2MQTT. Thread runs an IPv6 network over low power radios, and it takes a Thread Border Router to connect it to WiFi or Ethernet. His existing hubs were too old, so he picked up a Smlight SLZB-06MU, which can be flashed with…

DiscImageStudio: burn visible artwork onto CDs, DVDs and Blu-ray discs #ArtTuesday

JiaFeiMiao-K-Cat has released Disc Image Studio on GitHub, a tool that turns a picture into data that etches a visible image onto the surface of a disc. It works with CD, DVD and single layer BD-R media, using an ordinary burner. The trick is arranging the written data so the pattern of burned and unburned areas shows up to the eye. Windows users can run the win-x64 .exe directly. Linux and macOS get an experimental command line build. Both packages include a .NET runtime. You pick a disc type,…

JP’s Product Pick of the Week — 3pm Eastern TODAY 11/3/26 @adafruit #adafruit #newproductpick

Come on by for JP’s Product Pick of The Week ! A new product pick will be revealed. The show airs at 3pm ET / 12pm PT Check out the livestream right here inside this product page you won’t want to miss it because there will be a BIG BIG DISCOUNT during the show! Tune in for: John Park’s newest product pick Learn how to use it Antics The live video will also be on YouTube LIVE, Twitch, Periscope (Twitter) and Facebook. LIVE TEXT CHAT IS HERE in the Adafruit Discord chat! Come on into the chat to…

Copper wire theft is so bad, Rhode Island’s blocking manholes with 700 pounds of concrete

Adam Ismail writes at The Drive about a low-tech fix the Rhode Island Department of Transportation is using against copper thieves: dropping 700-pound concrete blocks on top of the manhole covers that lead to streetlight wiring. Moving one takes equipment, thus access points are effectively closed. RIDOT Interim Director Robert Rocchio told NBC 10 WJAR the state has lost more than $1 million in stolen copper, with the thefts starting a few years back when copper prices climbed. The plan calls…

Learning-electronics: Every resource you need to learn electronic engineering

Kale Suarez has put together a collection of hand-picked online resources for learning electronics, published as a repository on GitHub. It starts with current, voltage, power, Ohm’s law and Kirchhoff’s laws, moves through capacitors, inductors, diodes, MOSFETs and BJTs, then covers reading schematics and datasheets and getting started with KiCad. The list is split into beginner and intermediate. Beginner entries are online textbooks and video guides. The intermediate section is aimed at people…

A cheap FPGA board becomes retro-style computer

The Parts Bin has built a complete retro-style computer inside a $15 Sipeed Tang Nano 9K board, and posted it at the-parts-bin.github.io. The Gowin FPGA on the board has 8,640 lookup tables and 52 KB of block RAM. It doesn’t have a hard CPU core, so the processor had to be built from the same logic as everything else. The result, called m9b, runs a 36 MHz RISC-V CPU with 24 KB of cache, 8 MB of PSRAM, 720×480 at 60 Hz over HDMI with 48 kHz stereo sound, two USB ports and an SD card. The HDMI…

The Python on Microcontrollers Newsletter: subscribe for free

The Python for Microcontrollers Newsletter is the place for the latest news involving Python on hardware (microcontrollers AND single board computers like Raspberry Pi). This ad-free, spam-free weekly email is filled with CircuitPython, MicroPython, and Python information that you may have missed, all in one place! You get a summary of all the software, events, projects, and the latest hardware worldwide once a week, no ads! You can cancel anytime. It arrives about 11 am Monday (US Eastern…

Did Gary Huber and Chris Hanson invent screen-space reflections 16 years before Crytek?

Chris Hanson, writing on the AlphaPixel blog, makes the case that he and Gary Huber shipped screen-space reflections in 1995, about sixteen years before Crytek’s 2011 talk gave the technique its name. The software was World Construction Set 2, a terrain renderer for the Amiga that ran on machines with 6 to 8 MB of RAM, down to a stock 7 MHz 68000 without a math coprocessor. The whole scene couldn’t fit in memory, so there wasn’t any geometry to ray trace against. Instead the renderer saved…

Could a modern chess engine on a Pentium have defeated Kasparov in 1996?

IBM spent millions building Deep Blue, a custom supercomputer with 480 chess co-processors, to beat Garry Kasparov in 1997. A new experiment asks whether an off-the-shelf 1996 desktop and better software would have done the job instead. The answer is yes, and it isn’t close. The test machine is a 200 MHz Intel Pentium Pro with 64MB of RAM, booting a tiny custom operating system off a 1.44MB floppy and talking to the network through a Realtek RTL8139C card. Stockfish was ported to 32-bit…

Carpet diem and 1000 vases merge textile, ceramic, and glass art at espace commines in paris #ArtTuesday

Curated by Francesco Pirrello, two international design exhibitions, Carpet Diem and 1000 VASES, converge at Espace Commines in Paris from October 23rd to 25th, 2026. The joint event pairs 32 textile pieces with 100 ceramic and glass objects, creating a unified material dialogue within the historic hall. Through a distinctive vertical scenography, the exhibitions explore contemporary interpretations of craft, form, and material boundaries. Conceived by Hervé Sauvage and Jean-Christophe…

DOOM’s DNA: How modern code keeps its family resemblance

Joe Esquibel scanned 43 descendants of DOOM’s 1997 source release and tried to work out which ones really inherited the original’s code, writing it up on GitGalaxy. The set includes faithful ports, modernized engines, and translations into about twenty languages, from Go and Scheme to Fortran, COBOL and SQL. Function names turn out to be a poor guide. Chocolate Doom keeps 87% of the original’s function names but only 35% of the code inside them. Doom Retro keeps 69% of the names and 0.2% of the…

Multi-layer ASCII art #ArtTuesday

Typeart is a web project that stacks several layers of real text to make a picture. Each layer is a plain HTML <pre> block, positioned with font offsets and styled with CSS. Copy the snippet and paste it anywhere HTML is allowed, then edit the text to make changes. The site’s maker finds ordinary ASCII art too limiting today, so the browser does the work of drawing. The filters do best on line art and on images with sharp contrast or smooth gradients. The snippets can carry the font file inside…

OpenBSD 8.0 expands RISC-V support and retires the Loongson port

Rutherfordium at pbxscience.com covers what’s new in OpenBSD 8.0, released October 20, 2026. It’s the project’s 61st release, and it adds a batch of work to the riscv64 port. The changes go past basic booting and start to use features of newer RISC-V chips, including kernel support for the vector extension and the Advanced Interrupt Architecture, plus work on the SpacemiT K3. The riscv64 port first appeared in OpenBSD 7.0 in October 2021, aimed at boards like the HiFive Unmatched and the…