XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

Adafruit Industries – Makers, hackers, artists, designers and engineers!

electronics, open source hardware, hacking and more...

floppy3.5: a portable 3.5″ disk WiFi NAS #Floppy @Raspberry_Pi

bigcrimping has built floppy3.5, a battery-powered WiFi NAS that reads 3.5″ floppy disks, published on GitHub. It’s aimed at the disks from old digital cameras like the Sony Mavica. The files in the root folder of a FAT12 1.44 MB disk show up on a web page over WiFi, and they can be copied to a microSD card. Two processors are on one custom PCB along with the charger and power supplies. The RP2354A controller runs a port of Keir Fraser’s Greaseweazle firmware, with the flux engine reworked to…

ICYMI: The Python on Microcontrollers Newsletter: CircuitPython 11.0.0-alpha.3 Released, Remembering Tim Peters, Python 3.16 Alpha 2 and More!

If you missed this week’s Python on Microcontrollers Newsletter, here is the ICYMI (in case you missed it) version. To never miss another issue, subscribe now! – You’ll get a terrific newsletter each Monday (which is out before this post). 12,340 subscribers worldwide! The next newsletter goes out Monday morning and subscribing is the best way to keep up with all things Python for hardware. No ads or spam, no selling lists, leave any time. From the Editor: Welcome to the latest Python on…

The PASTA/80 Pascal cross-compiler reaches version 1.00

pleumann has released version 1.00 of PASTA/80, a Pascal cross-compiler for Z80 systems, published on GitHub. The project took six years and 1000 commits. A cross-compiler runs on a modern machine and makes code for an older one. PASTA/80 is highly compatible with Turbo Pascal 3 for CP/M, so old source usually recompiles with few changes or none. The binaries it generates run on Agon, CP/M, and the ZX Spectrum 48K/128K/Next. pleumann also credits the authors of sjasmplus, Fab Agon, tnylpo,…

Tesserae turns e-paper displays into easily customisable dashboards

Les Pounder writing on the Pimoroni blog covers Tesserae, a project from Melbourne developer Kayden D’Mello. Kayden describes it as “an ecosystem for e-ink displays. You design a dashboard in your browser, and Tesserae renders it and sends it to whatever panels you own.” The dashboard is designed once in a browser, with widgets placed freely or snapped into a grid. Widgets can show calendars, weather, RSS feeds and Home Assistant data. Rendering happens on a local server, with a cloud server…

VapourDeck is the 486 handheld you didn’t know you needed

The VapourDeck is a handheld DOS machine in the shape of a Steam Deck, and it runs games on a real 486 processor instead of emulating one. The builder designed the system from scratch, which is a step up from the teenage years spent swapping ISA cards, overclocking a 486 with a crystal transplant and tweaking BIOS settings on hand-me-down boards from an uncle. The write-up runs across five pages, covering the design of the handheld, the hardware, and the firmware and gateware that tie the…

Open Duck mini robot build

Kevin McAleer continues his Open Duck build on his YouTube channel, and this episode is mostly about the wiring. He gets the robot’s wiring close to finished, working through the connections that bring the parts together. He also covers the problems along the way, including failed 3D prints and a bout of procrastination. More of his robot projects and tutorials are at kevsrobots.com. See the video below and more about the whole project on kevsrobots.com.

Microsoft adds a way to remotely lock lost Windows 11 laptops without wiping them

Kishalaya Kundu writes at TechSpot about a new Remote Lock option Microsoft is testing for Windows 11. IT administrators can already wipe a lost or stolen work laptop from a distance using Intune, Microsoft’s device management software. Remote Lock does something gentler: it blocks access while leaving the files alone, so a recovered machine can be signed into and used again. When it’s turned on, Windows signs out active sessions, hides the local sign-in options and shows a custom “Device…

How did Woz write the Apple 1 BASIC before building the computer?

A question on the Retrocomputing Stack Exchange asks how Steve Wozniak wrote the Apple 1’s BASIC before he had an Apple 1 to run it on. The answer, drawn from Woz’s own talks and Steven Weyhrich’s Apple II History site, is that he wrote it on paper and hand-assembled it at the same time, instructions on the right of the page, addresses on the left, looking up the hex for each one. Time-share assemblers cost thousands of dollars, which he didn’t have. The scale is smaller than it sounds. Apple 1…

Making a DIY mini Guitar Hero with ESP32

Barqunics built a mini rhythm game called Beat Dash and wrote it up on Hackster.io. It runs on an ESP32 with a color ST7735 TFT LCD for the screen and a GY-MAX4466 sound sensor, a small microphone board with an amplifier on it. What makes it different from most rhythm games is where the notes come from. There isn’t a stored beatmap or a decoded audio file. The sound sensor listens to whatever is playing in the room, and when the level peaks past a set threshold, the game spawns a falling note…

I’m not open-sourcing this video player – you can build it yourself!

Prime Video remembers how far into an episode a viewer stopped, so restarting an old series picks up at the closing titles instead of the beginning. Resetting that watch status can’t be done in the app. The web page for it is an infinitely scrolling list of every viewing, one row at a time, without filters or bulk actions. A post on atomic14 describes building a desktop app to fix that, written with Claude. The app embeds a web view, loads the Prime watch history settings page for sign-in, then…

An open-source ESP32-S3 robot brings AI to the desktop

Ananthu Ashok writes at Open Source For You about RIG-TARS, a 3D-printable desktop robot from LuwuDynamics built around an ESP32-S3 microcontroller. Its body is split into three segments that walk and turn on voice commands. Three SCS009 serial servos move the segments over UART, and a six-axis QMI8658C IMU, a chip that senses motion and tilt, feeds back position data. A 2.4 inch 320 x 240 color screen acts as the console. A microphone and speaker handle voice interaction. The ESP32-S3 listens…

Microsoft says Project Helix is a console that plays PC games, not a PC that plays console games

Skye Jacobs, writing for TechSpot, reports on what Microsoft has said about its next Xbox, code-named Project Helix. Jason Ronald, Xbox’s vice president of next generation, described it in the company’s Xbox 25th Anniversary Magazine as “a console that is also capable of playing games from your PC,” and said “it is not a PC that can also play console games.” The operating system is being built on Windows, but tailored for gaming rather than a desktop. The interface will be its own, drawing on…

The Python on Microcontrollers Newsletter: subscribe for free

The Python for Microcontrollers Newsletter is the place for the latest news involving Python on hardware (microcontrollers AND single board computers like Raspberry Pi). This ad-free, spam-free weekly email is filled with CircuitPython, MicroPython, and Python information that you may have missed, all in one place! You get a summary of all the software, events, projects, and the latest hardware worldwide once a week, no ads! You can cancel anytime. It arrives about 11 am Monday (US Eastern…

New super magnets turbocharge the Large Hadron Collider

Michelle Hampson, writing for IEEE Spectrum, covers the new superconducting magnets CERN built for the High-Luminosity upgrade to the Large Hadron Collider. The current dipole magnets use niobium-titanium coils that top out at 8.3 tesla, about 166,000 times Earth’s magnetic field. The new quadrupole magnets use niobium-tin coils and reach just under 12 T. Niobium-tin is brittle, so it can’t be bent into shape once it’s formed. The coils are made with a wind-and-react process instead. A…

An NES emulator, written in Odin

Lucy built a NES emulator in Odin, a simple C-like language, and wrote up the project on lucypero.com. Work started in late June 2024 and paused in January 2025, done off and on in spare time. The write-up pushes back on the idea that a NES emulator is a weekend project. Getting Donkey Kong on screen is quick, and 80 or 90 percent of the way there comes fast. The last 10 percent took months. The CPU and the PPU, the chip that draws the graphics, run in parallel and talk to each other, so the…

ESP32 WiFi Jam Detector finds the jamming

TheDigital1 has published a receive-only RF interference detector for the Waveshare ESP32-C5-Touch-LCD-3.5. It uses the ESP32-C5’s own WiFi receiver as a snapshot SDR (software defined radio, where the radio hardware is tuned and read by code) through ESPARGOS esp-sdr, and draws the noise floor and spectrum for both 2.4 GHz and 5 GHz on the built-in touchscreen. It doesn’t transmit. It can show that the RF environment changed, but it can’t prove intent: a running microwave oven looks like…

Warm analog DSP on the ESP32

This Hackaday.io project uses an ESP32 to mimic the sound of a vacuum tube amplifier. Tubes add even-order harmonics, soft clipping and a slow response to volume changes, which many listeners hear as warm and musical. The DSP code reproduces that behavior, and the effect is adjustable and can be bypassed. The hardware is the same as the builder’s earlier parametric equalizer: an ESP32 board, a WM8960 audio codec board, a color display and three rotary encoders. Much of the software carries over…

A $24 e-ink desk pager built from a Raspberry Pi Zero

Vipul Gupta posted on X about a desk pager he built for $24. It’s a small e-ink display that shows his agent notifications, tracks usage limits, and shows texts from his girlfriend, so the alerts are on the desk instead of a phone. The parts list is short: a Raspberry Pi Zero and a Pimoroni e-ink display. The OS is flashed to an SD card, the display is configured there, and the board is connected to power. E-ink holds the image without drawing current, so the screen stays readable between…

It runs Doom” is more than a meme. The reason lies in its engineering

Emma Gometz writes in Scientific American about why the 1993 shooter Doom keeps showing up on hardware its creators didn’t plan for. The game was written for the Intel 486, and it used binary space partitioning, or BSP, which sorts the polygons of a level in advance so the engine can quickly work out what to draw from wherever the player is standing. Software engineer Fabien Sanglard, who wrote a book on the game’s engineering, says BSP is what cracked the frame rate. Most of the game is…

Ham radio operator helps police with robbery #HamSunday

Wikipedia has a detailed account of the Baker Street robbery, the September 1971 burglary of safety deposit boxes at the Lloyds Bank branch at 185 Baker Street in London. A gang rented a leather goods shop two doors away and dug a 40 foot tunnel to come up under the vault floor. A jack failed, a thermal lance failed, so they used gelignite and blasted a 12 inch hole through three feet of reinforced concrete. They emptied 268 boxes. The radio part is what makes it interesting to hams. The gang…

Adafruit New Products this Week: LT8912B DSI to DVI Converter

We’ve got the New nEw NEW for you right here Coming Soon! Adafruit LT8912B DSI to DVI Converter Visit www.adafruit.com/new for more info. Want to get new products info beamed straight into your inbox? New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter New nEw NEWs From Adafruit is an email…

Build Your Own E-Reader for $40

Allan Binder of MUON SORTES shares this how to guide for building an affordable e-reader. And head to Allan Binder‘s instagram for a more polished look and future iterations. You need four things: an ESP32-S3 dev board, an e-paper panel with its adapter board, a five-way button module, and a way to power it. Total cost lands between $35 and $60 depending on the panel you pick. The ESP32-S3 is the right microcontroller for this because it has WiFi built in, enough flash to store a few books, and…

What is STEMMA QT?

Put simply STEMMA QT is the cute version of a STEMMA connection. STEMMA is a plug-and-play board and sensor system that lets you quickly plug together various devices and accessories, without any soldering! STEMMA QT is the smallest STEMMA connector and is used for 12C communication. See more from the Adafruit Learning System: What is STEMMA QT? We like the JST PH 2.0mm pitch cables because they are cross-compatible with Grove/Gravity. But they’re a bit large for smaller breakout boards and…

Egg Carrier – Transport Box for Up to 12 M+L Eggs #3DPrinting

A transport box designed to safely carry up to 12 eggs (size M and L). Compartments keep eggs separated and protected during transport. For backyard chicken owners, farmers, camping trips, and everyday kitchen use — reusable alternative to disposable cartons. Press-fit small arms (no glue needed; scale down slightly if too tight). Glue to fix holders into bottom part. Closure needs 6× M3×30 screws (4-egg variant uses 2× M3×15 + 2× M3×30). Variants: 6-Box M+L (7h), 10-Box M-XL (9.8h), 4-Box M+L…

Are contemporary technologies like GPS, phones, and AI deskilling humans?

Jason Kottke posted a short link on kottke.org asking whether tools like GPS, phones, and AI are deskilling the human body. The quote he pulls out makes the case: “In surrendering to a quick technological fix, we are, moment by moment, doing less sensing, navigating, remembering, walking, choosing, and attending.” The argument is about the small abilities that go unused when a device handles them instead. See more at kottke.org.

ESP32 Demoboard: New demo projects using on-board hardware

oeadmin continues the ESP32 demoboard series on Open Electronics with five more Arduino examples that use the board’s OLED display and its plug-in breakout modules. The first reads hand gestures from an APDS-9960 sensor, a part that detects light, color and motion from about 10 to 20 cm away, and prints the direction on the display. The second uses an AMS AS3935 breakout, which picks up the radio noise from lightning and reports the number of strikes and an estimated distance up to 40 km. A…

Microsoft’s Canada timezone troubles leave admins fixing calendars, pretending they’re in Bogota

Carly Page at The Register reports on what happened when parts of Canada stopped changing their clocks. As of November 1, affected areas of British Columbia, Alberta, and Manitoba are permanently on UTC-07:00, UTC-06:00 and UTC-05:00. Microsoft’s software hasn’t entirely caught up, so some customers are seeing wrong times and broken schedules. Outlook is the worst of it. Switching to one of the new Canadian time zones doesn’t update existing calendar entries, so meetings booked after November 1…

F3D updated, now supports FreeCAD files!

Jo Hinchliffe writes on the FreeCAD blog that F3D, the open source 3D model renderer and viewer, can now open FreeCAD FCStd files as of version 4.0. The simplest way to try it is the public web viewer, which loads a sample file or a file from the local machine. There’s more to it than that, with options for lighting, positioning, animation playback and even video creation. Packages are available to install it locally on many operating systems. FreeCAD uses F3D itself to generate STEP file…

Sony revives the original Walkman headphones, adds USB-C

Scharon Harding, writing for Ars Technica, covers Sony’s return to the MDR-3 headphones that came out in 1979 next to the Walkman TPS-L2 cassette player. The new model is called the MDR-3R, and it copies the look of the original: a thin gray plastic headband with metal sliders, and round on-ear cushions in orange. Blue cushions are included too. The connector is the big change. The MDR-3R is wired, like the original, but it ends in USB-C instead of a headphone plug. Sony says it uses the same…