XIO

xWire

Posts from every feed QUEST has found across the web — blogs, news, podcasts, channels and more.

Recent Questions - Server Fault

most recent 30 from serverfault.com

Server time is one minute fast and won't correct

My domain controller is about 54 seconds fast and whatever I do to try and sync it's time correctly it just keeps reverting to this incorrect time. I have tried multiple different NTP time servers and all behave the same. Here is how I am currently syncing the time: w32tm /config /manualpeerlist:"0.uk.pool.ntp.org, 1.uk.pool.ntp.org, 2.uk.pool.ntp.org, 3.uk.pool.ntp.org" /syncfromflags:manual /update net stop w32time && net start w32time w32tm /query /source w32tm /resync Output from w32tm…

HPE Proliant DL360 Gen10 stuck detecting networking launching Intelligent Provisioning

I have a HP Proliant DL360 Gen10 that I am trying to install Windows Server 2022 on. It currently has a working(ish) install of Windows Server 2016, but we are introducing WSL to our builds and frankly it is time to update anyways so I am looking to upgrade to Windows Server 2022. HP's website says this server is compatible (according to https://cdn.support.hpe.com/hpesc/public/docDisplay?docId=a00018801en_us&page=GUID-E15BBF53-6AE4-49E0-A3A6-13604C7773A9.html&docLocale=en_US) but when I opened…

How can I configure HTTPS and automatic HTTP-to-HTTPS redirection for a business website?

I'm working on a business website for a gold savings service, and I want to make sure visitors can access it securely. I want all visitors who open the website using HTTP to be redirected automatically to HTTPS. I also want to avoid redirect loops and make sure the website continues to work correctly after enabling the redirect. What is the recommended way to configure this on a web server? Does the configuration differ between Apache and Nginx?

Bacula-fd causing heavy write load on source drive

In my current setup, all three daemons are running on one server. The fileset being backed up resides on that server's primary local HDD (sda). The backup volumes all live on another host, accessed via NFS. Bacula's logs and working directory are on a separate HDD (sdb). When I watch resource utilization with atop during a Bacula backup job, I see a lot more write activity from bacula-fd than I expect (frequently higher than the read activity). The underlying filesystem is btrfs, and I see…

Error in establishing an OpenSSL connection to an XMPP server

Starting recently it is not possible to connect to an private XMPP communication server. The DNS resolving is done over INWX and the IP is dynamic. The client (Monocles in Android) an the server (Prosody in Linux) has not changed. It is the same when a client in Linux tries to connect from the internet to the private server, so it is not related to Android. A local connection within the Intranet works. Searching for the reason could identify this problem within establishing the connection to…

svn: Can't open file 'txn-current-lock': Read-only file system

Installing a Subversion repository on an Ubuntu 26.04 LTS server with AuthBasicProvider dbm (see my steps below). When commiting from a client we get following error: svn: E000030: Commit failed (details follow): svn: E000030: Can't open file '/home/svn/myrepository/db/txn-current-lock': Read-only file system We get that error only in 26.04 LTS. The same scripts work perfectly with following versions 20.04 LTS - svn, Version 1.13.0 (r1867053) 22.04 LTS - svn, Version 1.14.1 (r1886195) 24.04 LTS…

Windows DHCP Failover: Dynamic DNS Update Failures, Stale PTR Records, and DnsUpdateProxy

I manage an infrastructure with more than 8,000 devices, and I am experiencing persistent issues with dynamic DNS updates performed by our Windows DHCP servers. Environment DNS integrated with Active Directory, with 3 domain controllers. 2 DHCP servers configured in Failover mode using Load Balance (90/10). The issue DNS records are not being updated reliably when DHCP leases are assigned. PTR records frequently point to the wrong devices because existing records are not properly overwritten.…

Can I do SpamHaus DNS lookup of client ip in SpamAssassin?

I have stumbled into a rabbit hole of sorts, since I am trying to make my mail server better in spotting spam mails by analyzing attached graphics. However I got a bit sidetracked today, because I just received 2 spam mails that was not detected by postscreen even though the origin client ip address is listed at SpamHaus. Here is what happened: Client 178.16.54.144 sent one mail via mail server 95.64.227.138 and another via mail server 217.154.78.100. Both mails contained phising mail. Client…

Google Web Risk Lookup API: Can threat results be cached and reused across users until expireTime?

I am developing QR Astro, a QR code security application that uses the Google Web Risk Lookup API (uris.search) to check URLs extracted from QR codes. I am trying to understand the documented caching behavior for the Lookup API. My proposed implementation is: When a user scans a URL, my backend checks its database for an existing, unexpired threat result. If no valid cached result exists, my backend calls the Web Risk Lookup API. If the API returns a threat match with an expireTime, I store the…

Internal Network On Hypervisor Can't Get Internet [migrated]

I am trying to build a hypervisor that uses DHCP to connect to a physical gateway. The hypervisor uses Virtualbox. A virtual machine with Ubuntu Client With Host Only Adapter can not ping outside networks. Devices Hypervisor: SECURITYBOX VirtualboxVM: ROUTER VirtualboxVM: CLIENT Networks 192.168.0.1 (physical router) 192.168.56.1 (Virtualbox Host-Only Adapter) Ping Test SECURITYBOX => 192.168.0.1 [OK] SECURITYBOX => 192.168.56.1 [OK] SECURITYBOX => 1.1.1.1 [OK] ROUTER => 192.168.0.1 [FAILED]…

why is php-fpm terminating after 90 seconds?

just installed new php 8.3.36 from source on ubuntu system. i previously had 8.3.6 from the apt packages. the fpm processes die after 90 seconds and all that is in the phpfpm log is "Terminating ... exiting, bye-bye!" systemctl start php8.3-fpm restarts it, but the systemctl command hangs for co-incidentally 90 seconds. journalctl -xeu php8.3-fpm.service has a message: Oct 22 11:56:00 schedule.nsaeroclub.com systemd[1]: php8.3-fpm.service: start operation timed out. Terminating. so apparently…

How to protect a server against the recently revealed “PHP2Shell” exploit? Older servers and newer servers?

Recently, a PHP exploit nicknamed PHP2Shell was revealed which combines the exploits in CVE-2026-109618 and CVE-2026-109619. As explained on the white hat site about this: “PHP2Shell is a family of critical vulnerabilities recently fixed in core PHP, with severity reaching CVSS 9.2, that can allow unauthenticated attackers to execute code or expose sensitive process memory. PHP powers approximately 70% of websites, including platforms such as WordPress, Drupal and Wikipedia's MediaWiki.” This…

What does receiving mail server (MDA) do with mail when neither SPF, nor DKIM, nor DMARC records are found?

I think I roughly understand how (sender side) SPF, DKIM, and DMARC records work together to help receiving mail server (MDA) to decide what to do with incoming mail. I'm trying to understand how an MDA decides how to handle incoming mail when there are no SPF, DKIM, and DMARC records in the DNS for the sending domain (HELO FROM). Unfortunately, I could not find where this is documented, and, whether this is configurable at all.

Repeated Kerberos Event ID 4771 (0x18) for multiple domain users

At one of our clients, we are investigating repeated Kerberos Pre-Authentication Failed – Event ID 4771, with Failure Code 0x18, on the primary Domain Controller. The issue affects multiple/all domain users. Despite these events, users are able to log in manually with their current credentials without any problems. The Event ID 4771 entries are generated from different Client Addresses, and these addresses correspond to the respective users' workstations. The events are not limited to normal…

dnsmasq not seeing DHCPDISCOVER

With tcpdump I see incoming DHCPDISCOVER packets from my test client on eth1 but it seems like the dnsmasq DHCP server cannot see them, like they are not being forwarded to the local process. Tried disabling firewall but it makes no difference (it is not blocking broadcast). Looking for suggestions on what I may have missed and how to troubleshoot this further. From dnsmasq config: interface=eth1 dhcp-range=eth1,10.114.114.128,10.114.114.254,1h dhcp-authoritative log-dhcp Client CLI: # ifup…

No reconnection attempt after temporary downtime on a Wildfly ActiveMQ cluster-connection

On a production environment, we have two servers with Wildfly installed with IP address 1.1.1.1, 1.1.1.2, 1.1.1.3 and 1.1.1.4. We're using the messaging-activemq subsystem on it. About the environment Wildlfy version: 14 Java version: java version "1.8.0_102" Apache ActiveMQ Artemis Message Broker version 2.6.3 The problem There's a intermittent network failure between the nodes sometimes. (We didn't identify the root cause yet). This cause the cluster-connection to output this warning message…

Seeking official industry benchmark or report source for global IT workload distribution on cloud infrastructure in 2020

I am researching historical enterprise IT adoption metrics and trying to find the widely accepted industry statistic (often cited from firms like Gartner, IDC, or Flexera) regarding the proportion of the world's total IT workload running on cloud infrastructure as of 2020. While I have found various adoption rates (such as enterprise cloud usage percentages or total IT budget allocations, which often hover around 30% to 50% depending on public vs. private definitions), I am looking for the…

Self-hosted mail server not reaching some recipients [closed]

I have been running a self-hosted mail server (Postfix + Dovecot on Debian) for several years. Over time I have fixed various delivery problems related to DMARC, DKIM, reverse DNS, etc., and almost all mail testing services that I query for spam score come up 90-100% clean. Still, some recipients are not getting my emails. These are always new contacts, and most of the times my email goes to spam. The only red flag I see from some mail testers is that my server is on a UCEPROTECT Level 3…

How can I determine whether wireless congestion or backhaul capacity is limiting network throughput? [closed]

I am looking into a performance problem in a managed fixed wireless network, and I want to find the real bottleneck before I change the infrastructure. The network uses links to connect remote sites. I need to figure out whether the limit is caused by congestion, channel configuration, link quality, or not enough backhaul capacity. Before I think about changing the frequency band, I want to set up a baseline. My investigation will include: Measuring throughput during quiet times. Checking…

How to resolve PrismaCloud alert "AWS IAM Groups with administrator access permissions" while retaining administrative privileges?

We are currently managing our AWS infrastructure for a business environment and our security scanner (PrismaCloud) is triggering the following medium-severity alert: PrismaCloud: Medium - AWS IAM Groups with administrator access permissions The Problem We genuinely require AdministratorAccess permissions for our core operations team to manage the infrastructure. However, the alert triggers because we currently have this policy attached directly to a standard, permanent AWS IAM Group containing…

Issue of Books API [closed]

Problem you have encountered: We searched by ISBN using the Google Books API as shown below: https://www.googleapis.com/books/v1/volumes?q=isbn:9784785730703 This ISBN should return a matching result. However, it appears that a recent issue has occurred, and the API now returns zero results: { "kind": "books#volumes", "totalItems": 0 } The ISBN corresponds to a book that is available in Google Books and can be found through the Google Books website. Therefore, the API response appears to be…

How can an administrator recover OST mailbox data after an Exchange account is removed?

I'm looking for guidance on recovering Outlook mailbox data from an OST file when the original Exchange account is no longer available. In an Exchange Server environment, an employee's mailbox may be removed during offboarding, but the administrator might still have a copy of the OST file from the user's workstation. The challenge is that OST files are associated with their original Outlook profile and mailbox configuration. Simply creating a new Outlook profile or attaching the old OST file…

How to scrub/force a checksum calculation on ext4? [migrated]

NOTE: This is to get updated authority answers from How to get checksum data integrity on ext4?, since the top answer links to a page that is marked as out-of-date since linux 3.5! But the new kernel doc doesn't cover this topic anymore. since 2012, ext4 filesystems have journal and checksum. But there's no tool to actively scrub the disk and make sure there was no "bit rot" or media failure. Some places suggest to read the entire disk every now and then. Is this still the recommended approach?…

WordPress email notifications not getting delivered by postfix on secondary addon domains

I have installed WordPress 6 times with different domains on 3 different servers: Server 1: itwithme.com and josvlaar.com Server 2: ictmee.nl Server 3: test.itwithme.com, test.ictmee.nl and test.josvlaar.com The first domain mentioned is the one set as Hostname, in Reverse DNS and set as myhostname in Postfix version 3.10.6. I will refer to this domain as the main domain and the other domains as addon domains. The issue I have is that only email notifications from the main domain are getting…

dsconf command not on Red Hat server

I need to import LDIF files to move an OpenLDAP directory (redhat-release-8.10-0.3.el8.x86_64). I installed this on the new server: Package Architecture Version Repository openldap-servers x86_64 2.4.46-21.el8_10 codeready-builder-for-rhel-8-x86_64-rpms I ran this: Successful yum -y install openldap-servers restorecon -Rv /etc/openldap/export/export.ldif Failed dsconf -D "cn=Directory Manager" ldap://\``uname -n\`` backend import userRoot /etc/openldap/export/export.ldif However, this failed…

How does HAproxy count the number of active connection in leastconn?

I have an HAProxy server that use leastconn to load balance between two server. Here's the config file: frontend FrontEnd bind :80 maxconn 2000 mode http option httplog option dontlognull default_backend BackEnd backend BackEnd balance leastconn server App1 IP1:8080 maxconn 3000 check inter 2000 rise 3 fall 3 server App2 IP2:8080 maxconn 3000 check inter 2000 rise 3 fall 3 My problem: HAProxy send fewer connection to IP1 than IP2. I want to know why so I read the leastconn documentation which…

Cannot access Linux server remotely, could firewalld or another firewall be blocking the connection?

I have a Linux server with several services, including SSH and web-based management services. The server is accessible from one location, but not from another location. I suspect that a firewall may be blocking the connection, possibly firewalld, but I'm not sure. Questions: How can I determine if firewalld is blocking the connection? How can I check whether these ports are actually listening on the server? How can I determine if the connection is blocked by firewalld, nftables, a cloud…