V
Hi there! I am new to the forum. I have a SIIG MemoPlus memory expansion board that I do not have any documentation for. I have searched the internet and this forum several times. Does anyone have any info on these cards? I am unable to configure it because I do not have any info on the switch settings. Thanks!
V
Dear Forum, I have found a monitor Atari PCC1415 with cut video connector. I have made a photo of the cable with the colored wires. Am I lucky and the colors of the wires are always the same and I do not have to open the monitor? Does anybody have an idea of the signals of the various wires? Thank you
V
We recently discovered an original vintage Intel presentation box containing approximately two dozen early integrated circuits, including four ceramic Intel C1702AL EPROM chips. The collection also includes original engineering paperwork labeled "Microprocessor Trainer (8080)," with handwritten revisions and component information. The chips appear to be arranged in their original foam-lined box. We do not know the collection's history, and the chips have not been tested. We would... Read more
V
I acquired a model 1 runs ok except for the fact that when it runs a short basic program it will clear the screen. Could this be a rom problem? I also noted that whoever did the LC mode didnt us the normal locations. LC works in LDOS only Joe
V
Finally I found the time and courage to stop fiddling with those simple 8-bits processors and start something more serious: writing assembly for the PDP-11 running RT-11. The current state is that I have a simple Hello World program running, assembled and linked using native tools (MACRO11 and LINK). While this works it is very slow, because of the 9600 BAUD TU58 emulation. It would be nice when the same could be done with cross-assembly/linking. The tools are there, but with all the... Read…
V
King's Bounty version 1.01 (unofficial): 1. Two more optimal CGA palette combinations have been added to the existing 8, and one has been replaced with a less optimal one. 2. When running in CGA mode on EGA/VGA/SVGA/MCGA, 4-color and 3-color palettes have been added, replacing palettes 6 and 7. 3. The skills, parameters, and costs of all creatures have been rebalanced. 4. Resettlement has been carried out according to morality groups. 5. Now only winged creatures... Read more
V
I have a three old Sun workstations that are taking up space but would be a real shame to scrap. I've not fully itemised the pile but can if there's interest. There's an Ultra 5, a Sparcstation IPC and a Sparc Classic, with various drives and a bag of cables. The Cisco box is just a router - assuming no interest in that Offering them for free if you're willing to collect or cover shipping.
V
Hi guys and galls, Does anybody know whats wrong with the 'The *HUMONGOUS* CP/M Software Archives' (http://cpmarchives.classiccmp.org/). It had a lot of TRS-80 software available for download. Few weeks ago it was alive and kicking.... now I only get the page source on my screen, see attached screenshot (tested different browsers). Maybe it has something to do with the recent PHP troubles?
V
WM 0.10 - a window manager for DOS XT/286 Hi all, here are years of personal work: a window manager for DOS that I built over time for my own use. It needs a 286 and a VGA card, 640x480 in 16 colors. It works on an XT, but that is not fully tested, because my PC is a Harris 286-25. It needs little RAM. With half a megabyte you should be able to load the shell + 4 or 5 apps with no problem. The apps usually need between 40 and 80 KB of RAM each, although some are heavier, like Cells... Read more
V
Hi All, I have already shared this on Vogons. I'm testing a firmware for the RP2350 microcontroller that converts MDA, CGA, C128 and other TTL video signals to HDMI. I'm using Waveshare rp2350-pizero board (which includes a DVI port). I've been getting very sharp and clear video capture with Hercules and CGA. The code is available on GitHub (It’s still in beta, but it’s a good starting point.). Wiki section includes some screenshots and videos... Read more
V
My family used this equipment from 1970's until 2000-something. I feel confident the PDP-1184 was running fine the day we shut it down. It has been sitting in our office since then but it is time for it to go. It would be great if it could find a loving home. I'm not sure I can describe it accurately so will send a few images. We are in Richmond, Virginia. Thanks.
V
Hi, I have some broken VT330+ lying around and want to give it a try to repair. It has an interesting graphics mode and I would love to put back the thing to life. Strange thing is that I could not find service manual or schematics for it on the internet. It looks like it was never scanned and uploaded by anyone. I found somewhere the DEC document id for the service manual, which is EP-VT33R-SV-001 . But as said, nowhere to find. Is there some way to get hands on that manual? E.g. micro... Read…
V
As mentioned in a different post (under "I designed and built a mechanical keyboard for the Commodore 128"), tech Ray Carlsen could not find an equivalent of these C128DCR locking, keyswitches. See photo. If anyone knows a source for replacements, please let me know. Truly, Robert Bernardo Fresno Commodore User Group - http://www.dickestel.com/fcug.htm Southern California Commodore & Amiga Network - http://www.portcommodore.com/sccan
V
Does anyone have the Olivetti M40 or M44 L1 boot disks ? There is a bios configuration in Mame so I'm assuming someone test it. Thanks in advance.
V
I am new to Osborne 1s so bear with me. I have an Osborne 1 that sometimes boots, sometimes turns on but with garbage on the screen with a continuous beep and drive activity, sometimes it’ll turn on with garbage on the screen with no beep or drive activity. Usually if I press down on the cpu near pin 1 it’ll boot. I checked all the cpu socket solder joints for continuity and they’re all good. I replaced the CPU, and I’ve also sprayed the socket with a ton of contact cleaner, and it’s the...…
V
I am looking for documentation on the sky-bus used with the CompuPro 386 card with a RAM 25
V
I'm looking for a DEC VT52 terminal, in working or non-working condition. Willing to pay for shipping or pick up as well.
V
Hi folks, I recently acquired a SE/30 that was in really rough shape. I've thoroughly cleaned everything, and recapped the logic board, analog board, power supply, and floppy drive. When it powers on I get a boot chime, and eventually an image that isn't healthy. I've been able to swap socketed ICs from a friend's unit, without change. I also swapped his logic board in and everything else works fine (CRT, PSU, and floppy). I'm not familiar with this unit, as this is the first one I've ever...…
V
I find myself not actually using floppy disks because despite owning half a dozen drives I've only ever been able to get my hands one or two working disks. I'm really curious if there is enough interest in the world yet for somebody to get a production run of new floppy disks made?
V
Rare 1980 Texas Instruments Magnetic Bubble Memory Display — $100 OBO Official TI milestone display with the exposed 1-Megabit magnetic garnet bubble memory chip (1 cm², two 512-Kbit halves) under clear acrylic. Red "MAGNETIC BUBBLE MEMORY" text and TI logo intact. Great vintage shape, just light surface scratches from desk wear. Price: $100 OBO Location: Owasso, OK (Tulsa area) Shipping: available at buyer's cost — it's acrylic, so I'll pack it well. Local pickup also welcome. Payment... Read…
V
Hello fellow computer nerds ! First post here — I’ve been avoiding posting until I really got stuck, but after two weeks of poking at this I think I need some expert eyes. I built a Motorola 68000 single-board computer a couple years ago based on Jeff Tranter’s remake of the TS2 (with a minor modification to increase RAM). The board works great and happily runs TUTOR, Enhanced BASIC, and small ROM monitors. Recently I saw a post showing the classic CP/M workflow on an Osborne 1, which... Read…
V
At the moment there is a lot of AI code for Vintage Computers. But in the wider world, some things bother me about this. For example, if I write an important C++ app for something, I can build with exact, known versions of compilers, with exact libraries, ( ie: gcc ver5.4.19) producing an exact binary for the same code. Other people can do that too, with the same source. That compiler is used by lots of other people, reviewing it for errors/problems/vulnerability. If I direct an AI agent...…
V
Let the wars of faith rekindle! I'd like to do DIP work, some SMD stuff, and eventually PLCC/QFP stuff. After searching on VCF, I see folks do use HAR, but where is a thread on the model/makers?
V
I thought it was pretty well done. Let’s Build a Brain How simple circuits can create complex behaviors aatishb.com
V
Memory check good the z80 checks good test rom test good. At a loss here. Joe
V
Thanks to the excellent redrawn schematic found in another thread on these forums link below, I've dived back into trying to recap & repair an old model 100 KiCAD & PDF model 100 schematic Power issues it seems I have so far... Pulled and tested T21 & T22 (both are fine), VDD now 5.1V but nothing on VEE. But D15 cathode reads -7.1V that’s good. No VEE but it turned out to be an open trace between D15 & C85, fixed. Now it no longer has VDD or VEE. Guess it’s time to... Read more
V
Hi all - I wanted to reach out in case someone has detailed enough knowledge of the construction of the keyboard membrane on the Cambridge Z88, because I have a curious problem and I wonder if anyone else has seen it. I bought a Z88 about 4 years ago and found quickly that the membrane was failing, as they are apt to do, so I quickly bought a new replacement membrane from a common source of them and fitted that with good results. I've brought it out occasionally since then, but not for a...…
V
Useful c2 peephole optimizer ("object code improver" from Ritchie's C compiler) : pdp11-xdev/src/pdp11-c2/c20.c at main · nyxcraft/pdp11-xdev Multi-universe PDP-11 cross-development toolchain (Ritchie cc, as, ld, binutils, das, s5fs, apsim user-mode simulator) spanning First Edition through 2.11BSD - nyxcraft/pdp11-xdev github.com https://nyxcraft.github.io/pdp11-xdev/c2-guide/index.html : replace $xx,xx(reg) -> (pc),xx(reg) mov natural,r ; bic $-400,r -> clr r ; bisb natural,r…
V
Hello, I just got this very heavy 20 inch monitor in my hands. Is this a CRT monitor? Does anyone have more info about this? Thanks in advance! Guy
V
Hi guys, I'm looking for beta testers for my new game for the Commodore PET 32K - Bytonia Incident. It’s a Lunar Lander clone, inspired directly by Lunar Mission and Lunar Rescue Mission on Android. My game combines elements from all three while adding its own twist. My main motivation was that I had never seen a game of this type on any 8-bit machine that properly simulated the physics, so I decided to change that. I'm quite happy with the result, but it’s not for me to judge the final... Read…